[moved]FUJIFILM DVD+R 1-8x

Burned with LITE-ON DVDRW SOHW-1653S (Firmware CS0P)
Speed 4x

Media code/Manufacturer ID RITEK R03
Media Product Revision Number 02h
Format Type UDF 1.02
Volume Name DVD-NTSC
Application id
Implementation id RoxioBurnEngine 2.1
Recording Date/Time (mm/dd/yyyy) 12/28/2005 20:31:30
Format Capacity 2.91GB(3.12GB)
Book Type DVD+R
Media Type DVD+R
Manufacturer Rated Speed 8.0x 11080KBps
Available Write Descriptor CLV 8.0x 11080KBps
Available Write Descriptor CLV 6.0x 8310KBps
Available Write Descriptor CLV 4.0x 5540KBps
Data area starting sector 30000h
Data area end sector 17433Fh
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1

                       Complete Media Code                           

00000000 08 02 00 00 A1 0F 02 00 00 03 00 00 00 1A 43 3F …C?
00000010 00 00 00 00 00 00 03 52 49 54 45 4B 00 00 00 52 …RITEK…R
00000020 30 33 02 38 23 54 37 09 00 3C 65 00 A0 5F 14 14 03.8#T7…<e…_…
00000030 0A 0A 0A 0A 01 19 1B 0B 0B 0E 0F 01 00 00 00 00 …

Date : 28-12-2005 20:44:06
Disc : DVD+R , RITEKR03 [RiTEK Corporation]

ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 1524541
Sampling count : 87355
Errors : 0
PI Max : 20
PI Average : 5,71
PI Total : 63710
PIF Max : 2
PIF Average : 0,14
PIF Total : 1581

Looks like a typical Ritek burn: 60-120K PIE total, and 1250-2750 PIF totals (these are normal averages I’ve noticed from my burns with a Plextor 716a and BenQ 1640). Of course, let’s hope this Ritek R03 doesn’t end up like the RitekG05 line, because I’ve seen a lot of people using the R03 stuff–and even Fuji uses it on their DVD+R 100 pk, and the Prodisc stuff on 50pks. I wish people would just dump Ritek all together, because their quality is usually soooooooo lacking, and more manuf’s using them doesn’t make them improve their dodgy q/a.