Moser Baer India BD-R

Writer: LG BU40N
Firmware: 1.02
Media: Mediarange BD-R 25GB 4x
MID: (MBIR06)
Burn Speed: 4x
Software: Imgburn 2.5.8.0
Burned 2019
Scanned 2019

1 Like

Writer: LG BU40N
Firmware: 1.02
Media: Mediarange BD-R 25GB 4x
MID: (MBIR06)
Burn Speed: 4x
Software: Imgburn 2.5.8.0
Burned 2019
Scanned 2019

Writer: Pioneer BDR-209E
Firmware: 1.51
Media: Mediarange BD-R 25GB 4x
MID: (MBIR06)
Burn Speed: 4x
Software: Imgburn 2.5.8.0
Burned 2019
Scanned 2019

Good for the Pioneer

Writer: Pioneer BDR-209E
Firmware: 1.51
Media: Mediarange BD-R 25GB 4x
MID: (MBIR06)
Burn Speed: 4x
Software: Imgburn 2.5.8.0
Burned 2019
Scanned 2019

Mediocre

MediaRange 25GB 4x / MBIR06

Burned with LiteOn iHBS112 @4x


Writer: LG BH16NS40 (NS51)
Firmware: 1.03
Media: Professional Line 25GB 6x
MID: (MBIR06)
Burn Speed: 4x
Software: Nero 12 Ess.
Burned 2020
Scanned 2020

The 8x-scan looks not so good, but the result is still far better than with BH16NS55 and WH16NS58. It´s also the 1st disc of the cakebox

Writer: LG BU40N
Firmware: 1.02
Media: Professional Line 25GB 6x
MID: (MBIR06)
Burn Speed: 4x
Software: Nero 12 Ess.
Burned 2020
Scanned 2020

Good for this media

Writer: Panasonic UJ273
Firmware: 1.00
Media: Professional Line 25GB 6x
MID: (MBIR06)
Burn Speed: 2x
Software: Nero 12 Ess.
Burned 2020
Scanned 2020

I don´t dare to write it 6x, 4x isn´t available

Mediarange BD-R 4x, PHILIP-R04-000,
LG BH16NS55@WH16NS58 1.V1 @4x

Plextor PX-LB950SA fails at optimal power callibration, the LG BH16NS55@WH16NS58 manages to burn discs both @4x and @2x speeds, but can’t read any of them. PX-LB950SA can “read” the discs burned @4x, but they all show a scan like that (drive switching to 1x read speed, I interrupted the scan not to waste laser lifetime):

Pleomax BD-R 4x, PHILIP-R04-000
Plextor PX-LB950SA 1.04 @4x


This must be a terrible batch. As I have written before all of my burners struggle with these discs, independently if it’s top or bottom of the cake. Maybe it hasn’t been stored properly. Plextor PX-LB950SA 1.04 fails at OPC, Optiarc BD-5750L 1.50 detects blank discs as “incompatible media”, surprisingly the TSST SE-506BB started burning, but I don’t expect miracles :slight_smile:

EDIT: the SE-506BB burned disc is not readable in any of my drives :slight_smile:

I have also some MBI-made media with quality problems (dots, only visible after burning)

But your Mediarange reminds me more of the awful media with OTCBDR001-MID.

I had also problematic PHILIPR04, but only if I burn more than 20GB

Your Pleomax looks good for this MID.

Since I bought the discs on an auction, I suspect that they might have been stored improperly.

Pleomax looks differently, both hub code and dye colour show that it’s a different disc type/generation. Pleomax is more brownish, hub code follows same pattern like old PHILIP-R02-000 media produced in the Netherlands.

Mediarange 25GB 4x / MBIR06

Burned with Panasonic UJ-220 @2x

1 Like

Awesome for this media

Writer: Pioneer BDR-212E
Firmware: 1.01
Media: Professional Line 25GB 6x
MID: (MBIR06)
Burn Speed: 4x
Software: Nero 12 Ess.
Burned 2021
Scanned 2021

C-grade media?

Looks more like Z-grade.

1 Like

Maybe it would look awesome with a 2x or 4x scan :wink:

I doubt that. :smiley:

OK, but it could help a bit :wink:

Here is another scan compare with this kind of media