Mitsubishi Chemicals DVD-R

vbimport

#543

Hi Tester_1, thanks for the reply :slight_smile:
I’m happy to hear this, I had thought bought a bad spindle in 2012.
I have more questions :smiley: the test is best to do it at DVD speed burn or indifferent ? For specification, it’s referred to total or the max value ? Max, right ?
I tried more DVD and burned the second at 16x, it’s have yellow vertical lines in the graphic, why ?
My next object is to buy 5 M-DISC in jewel case, I think it’s better than spindle, the disc are separated one of other, I think bad ?
Thanks for your patience and sorry me for all these questions and for my bad English :frowning:

Writer: LG BH16NS55 crossflashed WH16NS58
Firmware: 1.5
Media: Verbatim DVD-R 16x AZO
MID: (MCC 03RG20)
Burn Speed: 16x
Burned and scanned in 07/2018


Writer: LG BH16NS55 crossflashed WH16NS58
Firmware: 1.5
Media: Verbatim DVD-R 16x AZO
MID: (MCC 03RG20)
Burn Speed: 8x
Burned and scanned in 07/2018


#544

If you compare with my results of actual MCC-media you can see your 2012-media is much better.
The forum-standard-speed for scan is 8x, so I recommend to use 8x to have a better compare with other scans.
And yes, the specs is about max. PIE/PIF. It´s for sure not nice to have a high amount of PIE/PIF total, but the error-correction should not have problems with it if the max-value is low.
The vertical graph shows the read speed of the scan
M-Disc DVD or BD? In general, Jewel-Case is better than cakebox, but if you buy many media Jewel-Case is to expensive.
The upper scan looks like a media-problem about 2GB-mark, but should be readable in every drive
The lower scan looks very nice

My english is also not the best, no prob :wink:


#545

Thanks Tester_1, I understand all :slight_smile:
OK, next discs scans I make it at 8x. I think this media is better burn at 8x, for security probably I burn again the second media a this speed.
I want to buy BD M-disc, I know the people think it is equal BD HTL but I want to try, if exist this discs one motive there is or not ? :smiley:


#546

M-Disc should have good longevity, but I hope there also still drives for it exist in the next decades :wink:

Never tried one


#547

I think new drivers will still fully retro compatible as now, BD burners/players read and write CD and DVD. The only problem it’s my body in the next decades, I don’t have money for hibernation and I’m not Spiderman for prevent an accident :rofl:
Tomorrow Amazon send me 5 Verbatim BD M-disc, what you think about more layer ? I bought single layer (25 GB) because I think: more layer more mistake in the future.
This are new scan at 8% and are WOW, if you think this spindle staid in a bookcase for six year (if I remember right) and one DVD on other for 50 DVD !
Possible ? Or the crossflash firmware do a false scan ?

Writer: LG BH16NS55 crossflashed WH16NS58
Firmware: 1.5
Media: Verbatim DVD-R 16x AZO
MID: (MCC 03RG20)
Burn Speed: 8x
Scan speed: 8%
Burned and scanned in 08/2018

Writer: LG BH16NS55 crossflashed WH16NS58
Firmware: 1.5
Media: Verbatim DVD-R 16x AZO
MID: (MCC 03RG20)
Burn Speed: 8x
Scan speed: 8%
Burned and scanned in 08/2018


#548

Never burned a BD-DL, but DVD+R DL were more problematic than DVD SL.

Crossflash should not change anything at scanning. This result is possible with a good charge of older Verbatim-media


#549

Writer: Samsung SH-224FB
Media: Verbatim DVD-R; Made in India
MID: MCC 03RG20
Recording speed: 8x
Burn date: 2018
Scan date: 2018


#550

Writer: Samsung SH-224FB
Media: Verbatim DVD-R; Made in India
MID: MCC 03RG20
Recording speed: 8x
Burn date: 2018
Scan date: 2018


#551

Writer: Samsung SH-224FB
Media: Verbatim DVD-R; Made in India
MID: MCC 03RG20
Recording speed: 4x
Burn date: 2018
Scan date: 2018


#552

Writer: Asus BC-12D2HT
Firmware: 3.01
Media: Verbatim DVD-R 16x Printable Made in India
MID: (MCC 03RG20)
Burn Speed: 16x
Software: Nero CDSpeed 4.7.7.16
Burned 2019
Scanned 2019


Asus BC-12D2HT BD-Combo
#553

Writer: Piodata DVR-S21DBK
Firmware: 1.D9
Media: Verbatim DVD-R 16x Printable Made in India
MID: (MCC 03RG20)
Burn Speed: 16x
Software: Nero CDSpeed 4.7.7.16
Burned 2019
Scanned 2019

Not really good, but MCC -R is readable


PioData DVS-S21DBK
#554

Writer: LG GSA-4167
Firmware: DL13
Media: Verbatim DVD-R 16x Printable Made in India
MID: (MCC 03RG20)
Burn Speed: 16x chosen, down to 12x at 3,15GB
Software: Nero CDSpeed 4.7.7.16
Burned 2019
Scanned 2019

Benq and LiteOn are not in agreement


4167B Quality Scans
#555

Intenso DVD-R 4x / MCC 01RG20
Hub Code: 45 509 -R B C 14306
Stamper Code: ZC1946-DVR-H47A

Burned with NEC ND-1300A @2x




Intenso%204x%20NEC%202x%20scan%20BenQ%20erw2


#556

Writer: Optiarc AD-7290H
Firmware: 1.80
Media: Verbatim DVD-R 16x Printable Made in India
MID: (MCC 03RG20)
Burn Speed: 16x
Software: Nero CDSpeed 4.7.7.16
Burned 2019
Scanned 2019


Optiarc AD-7260S/7261S/7263S Results & Discussion
#557

Writer: NEC ND-3540A
Firmware: 1.W9
Media: Verbatim DVD-R 16x Printable Made in India
MID: (MCC 03RG20)
Burn Speed: 16x
Software: Nero CDSpeed 4.7.7.16
Burned 2019
Scanned 2019

Weird speed shifting


NEC ND-3540A Results Thread (Post your ND-3540A scans here)
#558

Writer: Pioneer DVR-220RS
Firmware: 1.01
Media: Verbatim DVD-R 16x Printable Made in India
MID: (MCC 03RG20)
Burn Speed: 16x
Software: Nero CDSpeed 4.7.7.16
Burned 2019
Scanned 2019


Pioneer DVR-220L/220VXL/S20L/S20FXV
#559

Writer: Asus DRW-2014L1
Firmware: 1.01
Media: Verbatim DVD-R 16x Printable Made in India
MID: (MCC 03RG20)
Burn Speed: 20x, switched down to ?
Software: Nero CDSpeed 4.7.7.16
Burned 2019
Scanned 2019


Asus DRW-2014L1T - Post your scans here