Mitsubishi Chemicals DVD-R

Burner: DVR-S16J-BK
Firmware: 1.10
Media: Verbatim 95153 16x DVD-R AZO white inkjet printable hub branded (MIT)
MID: MCC 03RG20
Stamper Code: ZD9912-DVR-J47F4
Hub Serial: MAP708MA09221800 A1
Burn Speed: 16x
Burning Software: Nero CD-DVD Speed 4.7.7.16

Disc manufactured January 9th, 2008 by CMC Magnetics Corp.

Burner: DVR-S15J-SV
Firmware: 1.22
Media: Verbatim 95153 16x DVD-R AZO white inkjet printable hub branded (MIT)
MID: MCC 03RG20
Stamper Code: ZD9912-DVR-J47F4
Hub Serial: MAP708MA09190622 A5
Burn Speed: 16x
Burning Software: Nero CD-DVD Speed 4.7.7.16

Disc manufactured January 9th, 2008 by CMC Magnetics Corp.

2 Likes

Burner: DVR-S15J-SV
Firmware: 1.22
Media: Verbatim 95102 16x DVD-R AZO matte silver branded (MIT)
MID: MCC 03RG20
Stamper Code: ZD5518-DVR-J47F4
Hub Serial: 6060E2024-08831E03
Burn Speed: 16x
Burning Software: Nero CD-DVD Speed 4.7.7.16

Disc manufactured March 1st, 2006 by Prodisc Technology, Inc.

Still like the performance of the x15-series :slightly_smiling_face:

1 Like

Burner: DVR-S15J-SV
Firmware: 1.22
Media: Verbatim 95102 16x DVD-R AZO matte silver branded (MII)
MID: MCC 03RG20
Stamper Code: ZE3252-DVR-J47C1
Hub Serial: 214 534 -R E D 2284
Burn Speed: 16x
Burning Software: Nero CD-DVD Speed 4.7.7.16

Disc manufactured May 24th, 2012 by Moser Baer India, Ltd.

Burner: BDR-S06J-BK
Firmware: 1.06
Media: Verbatim 95102 16x DVD-R AZO matte silver branded (MIT)
MID: MCC 03RG20
Stamper Code: ZD9356-DVR-J47F4
Hub Serial: MAP637LD10033821 3
Burn Speed: 16x
Burning Software: Nero CD-DVD Speed 4.7.7.16

Disc manufactured April 10th, 2007 by CMC Magnetics Corp.

Burner: PX-716UFL TLA#0101
Firmware: 1.02
Media: Verbatim 95102 16x DVD-R AZO matte silver branded (MIUAE)
MID: MCC 03RG20
Stamper Code: ZE0648-DVR-J47C1
Hub Serial: B1FH A01A J507161039 A44
Burn Speed: 16x
PowerRec: On
AutoStrategy: Auto
Burning Software: Nero CD-DVD Speed 4.7.7.16

Disc manufactured by Falcon Technologies International, Ltd.

1 Like

Writer: Pioneer BDR-212E
Firmware: 1.01
Media: Verbatim DVD-R 16x MiT (2011)
MID: (MCC 03RG20)
Burn Speed: 16x
Software: Nero 7
Burned 2021
Scanned 2021

1 Like

Writer: LG GH24NSD6
Firmware: : LU00
Media: Verbatim DVD-R 16x MiT (2011)
MID: (MCC 03RG20)
Burn Speed: 16x
Software: Nero 7
Burned 2021
Scanned 2021

1 Like

Pioneer BDR-208D Firmware: 1.50
Media: Verbatim 96248 (10) Bulk - Made in Taiwan
MID: MCC 03RG20 Burn Speed: 16x

2 Likes

Does the 212x fix the 03rg20 PIE problem, I have noticed for me at least, my 209 has pie problems

My scan looks good, I guess

But it´s older media, with newer MCC I almost never had really good results.

Verbatim DVD-R 16x / MCC 03RG20
Made in Taiwan by CMC in 12/2005

Recorded with Panasonic DMR-EH65




Verbatim -R CMC 2005 DMR-EH65 SP scan BenQ erw2

1 Like

Still low PIF total for these clusters

Drive: BH12LS35.
MID: MCC03RG20.
Speed: 16x.

1 Like

Any idea what you typically get?

because I think I am experiencing a noticeable decline in burn quality (like quite a bit more than I would have expected given my past results with this same media as I still got a older batch I bought in Jan 2014 that the last I knew still gave me the usual high quality burns/results) as I just got a batch of Verbatim DVD-R (MCC 03RG20) from Amazon this month (April 2022) and I just burned the first disc on my Sony Optiarc 7240s at 16x and quality took a rather large hit vs the usual standards I am used to given what KProbe is telling me (on Linux Mint v20.3-Xfce running Wine v4.0.4 32bit) with a scan at 8x with my Liteon iHAS324B burner…

even copying that burned data back to hard drive from that disc afterwards seems to go pretty much full speed until around 3.7GB range and you can hear it slow down for a while but then speeds back up etc.

EDIT: after trying a burn at 16x with the iHAS324B it was even worse as it failed to ‘verify’ at about 96-97% of pretty much a full disc. then I scanned it with Kprobe and it’s quite a bit worse than the scan I posted here as at least this one is still readable. but at this point I might try slowing burn speed down to 8x (or slower). if that fails to give a noticeable improvement, I only have my old Liteon 1673s to try and if that still fails to give decent results, chances are these discs are shot and I might opt for a refund on Amazon.

EDIT #2: after burning another disc or so, in short… the discs (Verbatim DVD-R) are pretty much shot.

at the least… they don’t like my burners (7240s and iHAS-324B) which maybe they changed the formula(?) or by some chance I got a bad batch(?), which I suspect is unlikely I got a bad batch. either way, ill probably avoid Verbatim DVD-R AZO recordable media in the future as I might try the Verbatim DVD+R AZO soon as I suspect those will probably work. but if not, to make things easier to return, ill order them from another place so if they act up I can take them back locally and won’t have to ship them back. but of the Verbatim Azo DVD+R fail, them pretty much my only safe option left is to stick with Taiyo Yuden (I assume these are still safe on pretty much all DVD burners?) if I need to buy more media. so basically I am returning those discs to Amazon for a refund.

Here´s a burn with an older MCC:

Here a newer one, same writer

OK, the old is is made by CMC and the newer from MBI but IIRC the difference between MBI and CMC Verbatims are not so different, at least with the latest media I bought, which is from 2017

Taiyo Yuden is hard to find and expensive. Maybe you get TY by CMC, this media looks to be not bad, but dunno how the vary of quality is and how it works with your writers

1 Like

BenQ DW1650 Firmware: BCIC
Media: Verbatim 96248 (10) Bulk - Made in Taiwan
MID: MCC 03RG20 Burn Speed: 8x (Software Imgburn)
WOPC Enabled
SolidBurn Disabled


1 Like

Nice to see burns with this Benq-oldtimer :slight_smile:

1 Like

BenQ DW1650 Firmware: BCIC (MCC 03RG20 to TYG02)
Media: Verbatim 96248 (10) Bulk - Made in Taiwan
MID: MCC 03RG20 Burn Speed: 8x (Software Imgburn)
WOPC Enabled
SolidBurn Disabled


1 Like