Matsushita Electric/Panasonic (MEI) BD-R SL

Panasonic 4x BD-R inkjet printable 30 pack spindle.

Liteon iHBS212
MID: MEI-T02-001
Burn speed 6x

4x scan to accompany this burn. It’s definitely an issue, even with 4x scanning. Will try the Pioneer on these discs soon to see if it’s the Lieton or the discs at fault.



Panasonic 4x BD-R inkjet printable 30 pack spindle.

Pioneer 209D
MID: MEI-T02-001
Burn speed 10x

Haven’t burned much past 20GB yet so can’t say much. Burn looks good otherwise.


Panasonic 4x BD-R inkjet printable 30 pack spindle.

Pioneer 209D
MID: MEI-T02-001
Burn speed 8x


Panasonic 4x BD-R inkjet printable 30 pack spindle.

Pioneer 209D
MID: MEI-T02-001
Burn speed 6x


Panasonic 4x BD-R inkjet printable 30 pack spindle.

Pioneer 209D
MID: MEI-T02-001
Burn speed 4x

Definite issues at end of disc. Burning past 20GB seems risky but the result is still acceptable. Will try 2x next to see if that can get past the outer edge issue.


Panasonic 4x BD-R inkjet printable 30 pack spindle.

Pioneer 209D
MID: MEI-T02-001
Burn speed 2x

Errors look like they would keep going up if there was more data to burn. Good result for 2x though. Considering the difference in speed though, 8x or 10x aren’t much worse for quality and save tons of time…


Pioneer BDR-S06XLB (fw 1.06), written at 4x.

Sold as “Panasonic 6x Inkjet Printable BD-R” (10pk spindle, purchased 04-2016)
MID: MEIRA1-001
Made in Japan

Unable to read the hub & stamper serial numbers.
Label says “50 Years Archival Life” (as here - ).

One step closer to that elusive 0.50 LDC average barrier. :D:bow:


Panasonic x6 BD-R 30 pack spindle (LM-BRS25MP30)

Pioneer BDR-209D 1.34
MID: MEIRA1 (001)
Burn Speed: x4
ImgBurn 2.5.8.0

Tested on Samsung SN-506BB

Panasonic BD-R 2x Jewelcase 5pcs

LG BH16NS55 FW1.02
MID: MEIT01 001
Burn Speed: 4x
Nero 12 Essential

Scan with Liteon ihbs 112 2 PL06

From my bunch oif burners only LG allow more than 2x burn speed on these BD-Rs

Fujifilm 25GB 2x / MEIT01

Burned with Pioneer BDR-209EBK @2x

Fujifilm 25GB 2x / MEIT01

Burned with LiteOn iHBS112 @2x

LG WH16NS58 TST4, 22,56 GB burned at 4x

sold as Panasonic 1-4x BD-R inkjet printable 50 pack spindle
MID: MEIT02
hub code: Z4D45010627785

Sorry for the bad aspect ratio :frowning:

Very nice :slight_smile:

But LG-drives are less sensitive drives than LiteOn, so it can´t be compared with it

1 Like

Same disc scanned with Samsung SH-B123L

LG WH16NS58 TST4, 22,56 GB burned at 4x

And finally the same disc scanned with PX-LB950SA

Would it be better to crossflash to LiteOn to get comparable results ?

1 Like

I´m not sure. If ODC have correct drives for the parameters it should don´t make differences.

I have crossflashed some HP to LiteOn, but all drives scan different, some are similar, others can´t be compared.

FUJIFILM BD-R 4x
MID: MEI-T02-001
MADE IN JAPAN

2 Likes

Panasonic 25gb 4x LM-BR25LP10 [Repack]
MID - MEIT02 - 001
Pioneer BDR-212DBK @ 4x
imgburn 2.5.8

Panasonic 25gb 4x LM-BR25LP10 [Repack]
MID - MEIT02 - 001
Liteon iHBS112 @ 4x
imgburn 2.5.8

1 Like

LG BH16NS55@LG WH16NS58 1.V5, 23.12 GB burned @6x

Sold as “Panasonic BD-R 6x Printable" in paper sleeve
MID: MEIRA1-001
Made in Japan

2 Likes