LTR-52327S: When I try to Burn At 4x It keeps jumping up to 16x when it try to burn

vbimport

#1

I am using a BUSLINK cd-RW, Lite-on. When I try to burn at a low speed it keeps jumping up to at lease 16x and cause and invalid write state. I have only been able to burn one time after days and days of trying. after the one burn I have never been able to burn again. help me please

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
Nero Version: 5.5.10.53 (Nero Express)
Recorder: <LITE-ON LTR-52327S> Version: QS55 - HA 1 TA 0 - 5.5.10.53
Adapter driver: <PL2507S > HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ CD-ROM LTN403> Version: DQ19 - HA 0 TA 0 - 5.5.10.53
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
COMPAQ CD-ROM LTN403 (Target 0, E:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
LITE-ON LTR-52327S (Target 0, F:): Autoinsert On, DMA ?, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 15728640 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 62MB (63932kB)
Free physical memory: 0MB (272kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

20.12.2004
Audio CD
3:08:30 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1622
Audio item log info:
Audio document burn settings:
=============================
Burn mode: TAO,
CD Text: Off,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 03:21.33, Pause frames: 150, Filters: 3, Name: ‘NER4D170029.wav’.
Total size: 03:23.33

3:08:30 PM #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated

3:08:30 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

3:08:30 PM #4 Text 0 File Writer.cpp, Line 125
Writer LITE-ON LTR-52327S running

3:08:30 PM #5 Text 0 File Burncd.cpp, Line 3768
Turn on Track-At-Once, using CD-R/RW media

3:08:30 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_AUDIO_NOPRE (NER4D170029.wav)
2 indices, index0 (150) not provided
original CD pos #0 + 15108 (15108) = #15108/3:21.33
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

3:08:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 15107 ( 3:23.32)

3:08:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

3:08:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 1694
Recorder: LITE-ON LTR-52327S;
CDRW code: 00 97 25 31; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: E6 00 D7, 2: 61 19 1F (LI 97:25.31), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 66 18 B8, 2: 38 80 00, 3: 04 CF 88

3:08:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder LITE-ON LTR-52327S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_AUDIO_NOPRE, 2352/0x0, ISRC “”, FilePos 0 352800 35886816

3:08:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

3:08:57 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (NER4D170029.wav)
2 indices, index0 (150) not provided
original CD pos #0 + 15108 (15108) = #15108/3:21.33
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15106 blocks [LITE-ON LTR-52327S ]
--------------------------------------------------------------

3:08:57 PM #13 Phase 32 File dlgbrnst.cpp, Line 1655
Simulation started at 16x (2,400 KB/s)

3:08:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0

3:08:58 PM #15 Text 0 File Mmc.cpp, Line 19030
Set BUFE: supported -> ON , SMART-BURN : ON

3:09:13 PM #16 SCSI -1 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x024C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE6 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

3:09:13 PM #17 CDR -1 File Writer.cpp, Line 333
Unspecified Recorder Error

3:09:13 PM #18 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

3:09:14 PM #19 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

3:09:14 PM #20 CDR -201 File WriterStatus.cpp, Line 153
Invalid write state

3:09:14 PM #21 TRANSFER -18 File WriterStatus.cpp, Line 153
Could not perform EndTrack

3:09:17 PM #22 Phase 34 File dlgbrnst.cpp, Line 1655
Simulation failed at 16x (2,400 KB/s)

3:09:17 PM #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 3/11/02 12:55:38 PM
File ‘IoSubsys\NeroApix.vxd’: Ver=1.0.0, size=14495 bytes, created 3/30/00 2:22:44 PM
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2225, size=24430 bytes, created 2/2/00 4:46:04 PM
File ‘…\System32\Drivers\1394bus.sys’: Ver=4.10.2222, size=37328 bytes, created 4/23/99 10:22:00 PM
File ‘…\System32\Drivers\Ohci1394.sys’: Ver=4.10.2222, size=35648 bytes, created 4/23/99 10:22:00 PM
File ‘…\System32\Drivers\Ntmap.sys’: Ver=4.10.2222, size=9360 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Ntmaphlp.pdr’: Ver=4.10.2222, size=9825 bytes, created 4/23/99 10:22:00 PM
File ‘…\System32\Drivers\Sbp2port.sys’: Ver=4.10.2222, size=32592 bytes, created 4/23/99 10:22:00 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM

Registry Keys:


#2

This is from Nero log:
3:08:57 PM #13 Phase 32 File dlgbrnst.cpp, Line 1655
Simulation started at 16x (2,400 KB/s)

And this is your problem:
Physical memory : 62MB (63932kB)
Free physical memory: 0MB (272kB)
Memory in use : 100 %

Another error:
Audio CD must be written in DAO not TAO.


#3

There’s also no legitimate reason to be burning anything at 4x with that burner.


#4

Well, unless you got stacks of 4x CD-RWs :wink:

But try not to - 4x burns on this thing give really shitty quality. The drive gives best results in the 32x-48x range; The further you get from there, the worse the quality gets and the more C1/C2 errors seem to pop up. 4x burns look terrifyingly hideous with that drive (One I did when I first got it, thinking the drive would act like my old Mitsumi (Slower=Better quality), had over 20,000 C1 errors!!!)