does ur motherboard bios detect it... ?
Assuming it does not...
Here it goes....
...... this works only if u have another cd/dvd rom drive...MTKFLASH 1.8
1:Find a win98/ms dos Boot disk/cd
2:Open your cabinet
3. figure out your Primary & secondary masters & slaves.
4.Now connect other cd/dvd to secondary slave IDE cable & disconnect the writer but keep power cables intact..
5.Boot the computer.. Bios will detect cd/dvd rom as secondary slave, save the settings and reboot with the Boot disk to dos mode.
6. NOW FOLLOW CAREFULLY
7.insulate ur self (simply sit on a chair , keep ur self off the ground)
8.Remove the IDE cable from the cd/dvd drive and attach it to the writer..DO NOT POWER OFF THE SYSTEM....
9. Run mtkflash1.8 from C: drive(HARDDISK ONLY)
10.somethin like....C:\mtkflash X w firmware.hex
11. X is 4, since it is secondary slave
12. Wallaaaa.... mtkflash flashes ur drive..
13.Its fully operational Now.