Logical block address out of range after the first use

Here we go…

I am having the weirdest problem
trying to back up my new original Toyota Navigation DVD for my 2007 Prius.

used Imageburn made an iso file of the DVD and then burned it back on memorex DVD+ R DL with Booktype DVD ROM. verified the contents on it twice comparing it with the iso perfect match.
the dvd does work on another compatible car when I tried it but once I put it in the 2007 Prius it does not work or works Very shortly and then it stops.
took it out and verified it with imageburn again and this time I do get an error:


I/O Error!
Device [1:0:0] TSST corp CDDVDW TS-L632N 0503 (F:) (ATA)

ScsStatus: 0x02
Interpretation: check condition

CD8: 28 00 00 1E 02 00 00 00 01 00
Interpretation: Read (10) - Sector: 1966592

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00 00 00
Interpretation: Logical block address out of range


and if I ignore it there will be whole bunch
they refer back to bunch of files which are not readable

How is it possible that a Navigation DVD Drive mess up the DVD?

I mean I have tried with Verbatim 2.4X DVD+R DL with the same result

I have also tried it on a 2006 Prius with the same result
but using the same material and techniques I have had success with other cars.

could that be because they were copied from a DVD ROM so the files are now very out on the edge and the edge gets messed up?

all these cars work perfect with the original DVD…

this is the log for when I verify the dvd


;
; //\
; ImgBurn Version 2.5.0.0 - Log
; Thursday, 24 September 2009, 19:40:25
; \
//
;
;
I 19:26:30 ImgBurn Version 2.5.0.0 started!
I 19:26:30 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)
I 19:26:30 Total Physical Memory: 3,143,164 KB - Available: 1,077,828 KB
I 19:26:30 Initialising SPTI…
I 19:26:30 Searching for SCSI / ATAPI devices…
I 19:26:33 Found 1 DVD±RW/RAM!
I 19:27:10 Operation Started!
I 19:27:10 Source Device: [1:0:0] TSSTcorp CDDVDW TS-L632N 0503 (F:) (ATA)
I 19:27:10 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 3x, 4x)
I 19:27:10 Image File: D:\Toyota Navigation\gen 5\v9.1 gen 5\464210-1380.MDS
I 19:27:10 Image File Sectors: 3,867,632 (MODE1/2048)
I 19:27:10 Image File Size: 7,920,910,336 bytes
I 19:27:10 Image File Volume Identifier: 464210-1380
I 19:27:10 Image File Application Identifier: Session Offset : 0 VTC Sector Offset: 0
I 19:27:10 Image File Implementation Identifier: Smart Storage, Inc.
I 19:27:10 Image File File System(s): ISO9660, Joliet, UDF (1.02)
I 19:27:10 Read Speed (Data/Audio): MAX / MAX
I 19:27:10 Verifying Session 1 of 1… (1 Track, LBA: 0 - 3867631)
I 19:27:10 Verifying Track 1 of 1… (MODE1/2048, LBA: 0 - 3867631)
I 19:27:10 Verifying Layer 0… (LBA: 0 - 1937759)
I 19:38:07 Verifying Layer 1… (LBA: 1937760 - 3867631)
W 19:38:07 Failed to Read Sector 1937760 - Reason: Logical Block Address out of Range
W 19:38:07 Sector 1937760 maps to File: \VIRTUAL1.DAT
W 19:39:30 Retrying (1)…
W 19:39:30 Retry Failed - Reason: Logical Block Address out of Range
W 19:39:34 Failed to Read Sector 1937760 - Reason: Logical Block Address out of Range
W 19:39:34 Sector 1937760 maps to File: \VIRTUAL1.DAT
W 19:39:34 Failed to Read Sector 1937761 - Reason: Logical Block Address out of Range
W 19:39:34 Sector 1937761 maps to File: \VIRTUAL1.DAT
W 19:39:35 Failed to Read Sector 1937761 - Reason: Logical Block Address out of Range
W 19:39:35 Sector 1937761 maps to File: \VIRTUAL1.DAT
W 19:39:35 Failed to Read Sector 1937762 - Reason: Logical Block Address out of Range
W 19:39:35 Sector 1937762 maps to File: \VIRTUAL1.DAT
W 19:39:36 Failed to Read Sector 1937762 - Reason: Logical Block Address out of Range
W 19:39:36 Sector 1937762 maps to File: \VIRTUAL1.DAT
W 19:39:36 Failed to Read Sector 1937763 - Reason: Logical Block Address out of Range
W 19:39:36 Sector 1937763 maps to File: \VIRTUAL1.DAT
W 19:39:36 Failed to Read Sector 1937763 - Reason: Logical Block Address out of Range
W 19:39:36 Sector 1937763 maps to File: \VIRTUAL1.DAT
W 19:39:36 Failed to Read Sector 1937764 - Reason: Logical Block Address out of Range
W 19:39:36 Sector 1937764 maps to File: \VIRTUAL1.DAT
W 19:39:36 Failed to Read Sector 1937764 - Reason: Logical Block Address out of Range
W 19:39:36 Sector 1937764 maps to File: \VIRTUAL1.DAT
W 19:39:39 Failed to Read Sector 1937765 - Reason: Logical Block Address out of Range
W 19:39:39 Sector 1937765 maps to File: \VIRTUAL1.DAT
W 19:39:41 Failed to Read Sector 1937765 - Reason: Logical Block Address out of Range
W 19:39:41 Sector 1937765 maps to File: \VIRTUAL1.DAT
W 19:39:41 Failed to Read Sector 1937766 - Reason: Logical Block Address out of Range
W 19:39:41 Sector 1937766 maps to File: \VIRTUAL1.DAT
W 19:39:42 Failed to Read Sector 1937766 - Reason: Logical Block Address out of Range
W 19:39:42 Sector 1937766 maps to File: \VIRTUAL1.DAT
W 19:39:42 Failed to Read Sector 1937767 - Reason: Logical Block Address out of Range
W 19:39:42 Sector 1937767 maps to File: \VIRTUAL1.DAT
W 19:39:43 Failed to Read Sector 1937767 - Reason: Logical Block Address out of Range
W 19:39:43 Sector 1937767 maps to File: \VIRTUAL1.DAT
W 19:39:43 Failed to Read Sector 1937768 - Reason: Logical Block Address out of Range
W 19:39:43 Sector 1937768 maps to File: \VIRTUAL1.DAT
W 19:39:43 Failed to Read Sector 1937768 - Reason: Logical Block Address out of Range
W 19:39:43 Sector 1937768 maps to File: \VIRTUAL1.DAT
W 19:39:43 Failed to Read Sector 1937769 - Reason: Logical Block Address out of Range
W 19:39:43 Sector 1937769 maps to File: \VIRTUAL1.DAT
W 19:39:44 Failed to Read Sector 1937769 - Reason: Logical Block Address out of Range
W 19:39:44 Sector 1937769 maps to File: \VIRTUAL1.DAT
W 19:39:45 Failed to Read Sector 1937770 - Reason: Logical Block Address out of Range
W 19:39:45 Sector 1937770 maps to File: \VIRTUAL1.DAT
E 19:39:47 Failed to Read Sector 1937770 - Reason: Logical Block Address out of Range
E 19:39:47 Sector 1937770 maps to File: \VIRTUAL1.DAT
E 19:39:47 Failed to Verify Sectors!
I 19:39:47 Exporting Graph Data…
I 19:39:47 Graph Data File: C:\Users\HP\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L632N_0503_THURSDAY-SEPTEMBER-24-2009_7-27_PM_RITEK-S04-66.ibg
I 19:39:47 Export Successfully Completed!
E 19:39:47 Operation Failed! - Duration: 00:12:37
I 19:39:47 Average Verify Rate: 5,119 KB/s (3.7x) - Maximum Verify Rate: 8,507 KB/s (6.1x)
I 19:40:25 Close Request Acknowledged
I 19:40:25 Closing Down…
I 19:40:25 Shutting down SPTI…
I 19:40:25 ImgBurn closed!
;


and this the burning log


;
; //\
; ImgBurn Version 2.5.0.0 - Log
; Friday, 09 October 2009, 13:14:36
; \
//
;
;
I 10:41:53 ImgBurn Version 2.5.0.0 started!
I 10:41:53 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)
I 10:41:53 Total Physical Memory: 3,143,164 KB - Available: 1,655,780 KB
I 10:41:53 Initialising SPTI…
I 10:41:53 Searching for SCSI / ATAPI devices…
I 10:41:56 Found 1 DVD±RW/RAM!
I 10:42:35 Operation Started!
I 10:42:35 Source File: D:\Toyota Navigation\gen 5\v9.1 gen 5\464210-1380.MDS
I 10:42:35 Source File Sectors: 3,867,632 (MODE1/2048)
I 10:42:35 Source File Size: 7,920,910,336 bytes
I 10:42:35 Source File Volume Identifier: 464210-1380
I 10:42:35 Source File Application Identifier: Session Offset : 0 VTC Sector Offset: 0
I 10:42:35 Source File Implementation Identifier: Smart Storage, Inc.
I 10:42:35 Source File File System(s): ISO9660, Joliet, UDF (1.02)
I 10:42:35 Destination Device: [1:0:0] TSSTcorp CDDVDW TS-L632N 0503 (F:) (ATA)
I 10:42:35 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 3x, 4x)
I 10:42:35 Destination Media Sectors: 4,173,824
I 10:42:35 Write Mode: DVD
I 10:42:35 Write Type: DAO
I 10:42:35 Write Speed: 2.4x
I 10:42:35 Link Size: Auto
I 10:42:35 Lock Volume: Yes
I 10:42:35 Test Mode: No
I 10:42:35 OPC: No
I 10:42:35 BURN-Proof: Enabled
W 10:42:35 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x)
I 10:42:35 Book Type Setting: DVD-ROM
I 10:42:35 Optimal L0 Data Zone Capacity: 1,937,748
I 10:42:35 Optimal L0 Data Zone Method: Copied From Original Disc
W 10:43:26 L0 Data Zone Capacity Miscompare!
W 10:43:26 Wanted: 1937748, Got: 1937760
I 10:43:27 Filling Buffer… (40 MB)
I 10:43:28 Writing LeadIn…
I 10:43:29 Writing Session 1 of 1… (1 Track, LBA: 0 - 3867631)
I 10:43:29 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 3867631)
I 10:43:29 Writing Layer 0… (LBA: 0 - 1937759)
I 10:59:33 Writing Layer 1… (LBA: 1937760 - 3867631)
I 11:16:01 Synchronising Cache…
I 11:16:07 Closing Track…
I 11:16:10 Finalising Disc…
I 11:17:00 Exporting Graph Data…
I 11:17:00 Graph Data File: C:\Users\HP\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L632N_0503_FRIDAY-OCTOBER-09-2009_10-42_AM_RITEK-S04-66_2.4x.ibg
I 11:17:00 Export Successfully Completed!
I 11:17:00 Operation Successfully Completed! - Duration: 00:34:24
I 11:17:00 Average Write Rate: 3,964 KB/s (2.9x) - Maximum Write Rate: 4,198 KB/s (3.0x)
I 11:17:00 Cycling Tray before Verify…
W 11:22:56 Waiting for device to become ready…
I 11:23:18 Device Ready!
I 11:23:21 Operation Started!
I 11:23:21 Source Device: [1:0:0] TSSTcorp CDDVDW TS-L632N 0503 (F:) (ATA)
I 11:23:21 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 3x, 4x)
I 11:23:21 Image File: D:\Toyota Navigation\gen 5\v9.1 gen 5\464210-1380.MDS
I 11:23:21 Image File Sectors: 3,867,632 (MODE1/2048)
I 11:23:21 Image File Size: 7,920,910,336 bytes
I 11:23:21 Image File Volume Identifier: 464210-1380
I 11:23:21 Image File Application Identifier: Session Offset : 0 VTC Sector Offset: 0
I 11:23:21 Image File Implementation Identifier: Smart Storage, Inc.
I 11:23:21 Image File File System(s): ISO9660, Joliet, UDF (1.02)
I 11:23:21 Read Speed (Data/Audio): MAX / MAX
I 11:23:21 Verifying Session 1 of 1… (1 Track, LBA: 0 - 3867631)
I 11:23:21 Verifying Track 1 of 1… (MODE1/2048, LBA: 0 - 3867631)
I 11:23:21 Verifying Layer 0… (LBA: 0 - 1937759)
I 11:34:17 Verifying Layer 1… (LBA: 1937760 - 3867631)
I 11:45:09 Exporting Graph Data…
I 11:45:09 Graph Data File: C:\Users\HP\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L632N_0503_FRIDAY-OCTOBER-09-2009_10-42_AM_RITEK-S04-66_2.4x.ibg
I 11:45:09 Export Successfully Completed!
I 11:45:09 Operation Successfully Completed! - Duration: 00:21:47
I 11:45:09 Average Verify Rate: 5,918 KB/s (4.3x) - Maximum Verify Rate: 8,507 KB/s (6.1x)
I 13:14:36 Close Request Acknowledged
I 13:14:36 Closing Down…
I 13:14:36 Shutting down SPTI…
I 13:14:36 ImgBurn closed!
;
;

I use the .mds file to burn it
should I just copy all the files from the dvd to my hard drive and burn it using imageburn so it can find the best locations for the file instead of ordering it to make exact match with the .mds and .iso files?

Your drive seems to have read the layer break position incorrectly on the original disc, 1937748 is not a multiple of 16 and it needs to be.

Please put the original back in the drive, switch to Read mode and then copy + paste the disc information from the panel on the right.

The log of the initial Read operation itself would also be good.

Issues after that could just be due to your drive/firmware/media issue. The dye you’re using there (‘RITEK-S04-66’) isn’t exactly great in a good number of drives - that’s why people always recommend Verbatim discs instead.

[QUOTE=LIGHTNING UK!;2455539]Your drive seems to have read the layer break position incorrectly on the original disc, 1937748 is not a multiple of 16 and it needs to be.

Please put the original back in the drive, switch to Read mode and then copy + paste the disc information from the panel on the right.

The log of the initial Read operation itself would also be good.

Issues after that could just be due to your drive/firmware/media issue. The dye you’re using there (‘RITEK-S04-66’) isn’t exactly great in a good number of drives - that’s why people always recommend Verbatim discs instead.[/QUOTE]

here is the read info from the original dvd and this time I am using a new external dvd drive


ATAPI iHAP222 8 VL03 (USB)
Current Profile: DVD-ROM

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 3,867,632
Size: 7,920,910,336 bytes
Time: 859:30:32 (MM:SS:FF)

File System Information:
Sectors: 3,867,632
Size: 7,920,910,336 bytes
Time: 859:30:32 (MM:SS:FF)

TOC Information:
Session 1… (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 3867631)
-> LeadOut (LBA: 3867632)

Track Information:
Session 1…
-> Track 01 (LTSA: 0, TS: 3867632, LRA: 0)

Physical Format Information (Last Recorded - L0):
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: 10.08Mbps
Number of Layers: 2
Track Path: Parallel Track Path (PTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,134,355
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded - L1):
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: 10.08Mbps
Number of Layers: 2
Track Path: Parallel Track Path (PTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,126,491
Last Physical Sector in Layer 0: 0

Layer Information:
Layer 0 Sectors: 1,937,748 (50.1%)
Layer 1 Sectors: 1,929,884 (49.9%)

here is my log for verifiying the image mds iso file to the original dvd

I 05:05:55 ImgBurn Version 2.5.0.0 started!
I 05:05:55 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)
I 05:05:55 Total Physical Memory: 3,143,164 KB - Available: 1,127,752 KB
I 05:05:55 Initialising SPTI…
I 05:05:55 Searching for SCSI / ATAPI devices…
I 05:05:55 Found 2 DVD±RW/RAMs!
I 05:09:08 Operation Started!
I 05:09:08 Source Device: [0:0:0] ATAPI iHAP222 8 VL03 (G:) (USB)
I 05:09:08 Source Media Type: DVD-ROM (Book Type: DVD-ROM)
I 05:09:08 Image File: D:\Toyota Navigation\gen 5\v9.1 gen 5\464210-1380.MDS
I 05:09:08 Image File Sectors: 3,867,632 (MODE1/2048)
I 05:09:08 Image File Size: 7,920,910,336 bytes
I 05:09:08 Image File Volume Identifier: 464210-1380
I 05:09:08 Image File Application Identifier: Session Offset : 0 VTC Sector Offset: 0
I 05:09:08 Image File Implementation Identifier: Smart Storage, Inc.
I 05:09:08 Image File File System(s): ISO9660, Joliet, UDF (1.02)
I 05:09:08 Read Speed (Data/Audio): MAX / MAX
I 05:09:09 Verifying Session 1 of 1… (1 Track, LBA: 0 - 3867631)
I 05:09:09 Verifying Track 1 of 1… (MODE1/2048, LBA: 0 - 3867631)
I 05:20:36 Exporting Graph Data…
I 05:20:36 Graph Data File: C:\Users\HP\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAP222_8_VL03_FRIDAY-OCTOBER-23-2009_5-09_AM_N-A.ibg
I 05:20:36 Export Successfully Completed!
I 05:20:36 Operation Successfully Completed! - Duration: 00:11:28
I 05:20:36 Average Verify Rate: 11,259 KB/s (8.1x) - Maximum Verify Rate: 16,505 KB/s (11.9x)


Ok, you can’t do a proper 1:1 of that disc, you’ll never get the layer break in the same place. I have no idea if that will actually matter to your navigation unit.

The read issues on your burnt copy are probably just as I said, caused by a bad drive/firmware/media combo.

[QUOTE=LIGHTNING UK!;2455595]Ok, you can’t do a proper 1:1 of that disc, you’ll never get the layer break in the same place. I have no idea if that will actually matter to your navigation unit.

The read issues on your burnt copy are probably just as I said, caused by a bad drive/firmware/media combo.[/QUOTE]

name a good external hard drive or an internal hard drive for a laptop and I will get that and I have verbatim + R DL 2.4x dvds and Iw ill try them that way.

as for the exact match : so the actual layer break is at that location which is undevidable to 16? is that like a physical copy protection?
I think most navigation units are based on linux does that make a ny difference?