LITEON SOHW-1673S Power calibration error

vbimport

#1

This is only the 2nd disc I’ve tried to burn. Firmware is JS02. DVD R is PRODISC 16X. Can anyone help?
Log.txt
C J SANTAROSE
TRINITYDIGITAL
serial number removed

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM 
Nero version: 6.3.1.26 (Nero Express)
Recorder:             <LITE-ON DVDRW SOHW-1673S>Version: JS02 - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  DVDRW SOHW-1673S>Version: JS02 - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : LITE-ON DVDRW SOHW-1673S         atapi Port 1 ID 0  DMA: On 
DiskPeripheral       : SEAGATE ST318451LW      0003    Symmpi Port 2 ID 0  DMA: Off
DiskPeripheral       : SEAGATE ST336753LW      0006    Symmpi Port 2 ID 1  DMA: Off
DiskPeripheral       : SEAGATE ST336753LW      0006    Symmpi Port 3 ID 2  DMA: Off
DiskPeripheral       : SEAGATE ST336753LW      DX10    Symmpi Port 3 ID 3  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1673S   J:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1048040kB)
Free physical memory: 681MB (698176kB)
Memory in use       : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

17.2.2005
ISO compilation
9:06:12 AM	#1 Text 0 File Isodoc.cpp, Line 6083
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
9:06:13 AM	#2 Text 0 File Reader.cpp, Line 126
	Reader running
	
9:06:13 AM	#3 Text 0 File Writer.cpp, Line 124
	Writer LITE-ON  DVDRW SOHW-1673S running
	
9:06:13 AM	#4 ISO9660GEN -11 File geniso.cpp, Line 3899
	First writeable address = 0 (0x00000000)
	
9:06:13 AM	#5 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
9:06:13 AM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            1699951 (377:46.01, 3320MB)
	
9:06:13 AM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
9:06:13 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+R
	 Disc Manufacturer ID: PRODISC, Media Type ID: R04, Product revision number: 4
	 Disc Application Code: 0, Extended Information Indicators: 7
	
9:06:13 AM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
9:06:13 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1699952 (1699952) = #1699952/377:46.2
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1699952 blocks [LITE-ON  DVDRW SOHW-1673S]
	--------------------------------------------------------------
	
9:06:23 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [LITE-ON  DVDRW SOHW-1673S] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3481501696, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 1699952 | lead-out |   1 |   0x00 |  0x41
	
9:06:23 AM	#12 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
9:06:23 AM	#13 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
9:06:23 AM	#14 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
9:06:23 AM	#15 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 16x (22,160 KB/s)
	
9:06:23 AM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
9:06:23 AM	#17 Text 0 File Cdrdrv.cpp, Line 8228
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R   (10), Part Version: 1
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 7 h
	  Disc Manufacturer ID: PRODISC.
	  Media type ID: R04
	  Product revision number: 4
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..63]:
	      00 00 07 50 52 4F 44 49 - 53 43 00 52 30 34 04 38    ...PRODISC.R04.8
	      23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08    #T7..Tk..c......
	      01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00    ................
	
9:06:23 AM	#18 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 2:45,264 (165264ms) -> OK
	
9:06:23 AM	#19 Text 0 File DVDPlusRW.cpp, Line 628
	Start write address at LBA 0
	DVD high compatibility mode: No
	
9:07:46 AM	#20 SCSI -1106 File Cdrdrv.cpp, Line 1445
	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AC50000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x73 0x03 
	
9:07:46 AM	#21 CDR -1106 File Writer.cpp, Line 304
	Power calibration error
	
9:07:46 AM	#22 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
9:07:46 AM	#23 Text 0 File ThreadedTransfer.cpp, Line 223
	conversion idle, stopping reader
	
9:07:46 AM	#24 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
9:07:46 AM	#25 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
9:07:46 AM	#26 Phase 38 File dlgbrnst.cpp, Line 1855
	Burn process failed at 16x (22,160 KB/s)
	

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6,2,0000,000 built by: WinDDK, size=102272 bytes, created 3/19/2002 1:03:06 PM 
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

Gracious thanks in advance,
cjs<><


#2

@ trinitydigital
You should PM a moderator and ask them to remove your serial number from the top of the error log.

I am going to assume that nero is reading your DMA for your HDD wrong, but you may wish to check.

Here is what nero has to say about Power calibration error. This is the US site link. What I might draw from that in your instance(seems you have the latest firmware) is maybe a bad disc(hope its not the whole batch), or maybe your power source(try your burner connected to its own power cable from the PSU…not shared). With your config of 4 HDD, I would assume you have a good Power Supply Unit installed.

Let us know if any of this helps or how you resolve your problem.


#3

Thank you for your reply. I’m new to the forum and not sure how to PM a moderator.
Power supply is TAGAN 480.


#4

@ trinitydigital
OK your PSU is big enough, can you try it with your burner on its own power line(not shared)? Also, can you try a different IDE cable(is yours an 80-wire connector, not a 40-wire?) or just disconnecting and reconnecting(possible bad connection?). You may wish to save the coasters and try for a return/refund from where you got them if they turn out to be defective. Let us know how it goes.
PS I PM’d a mod for you…it’s not too hard, just click on their name and choose from the dropdown menu :iagree:


#5

Excellent counsel. Thank you very much.