LiteON SHW-160P6S Unable to burn Imation DVD-R

Hi

I purchased LiteON SHW-160P6S few days back along with imation DVD-R pack of 50 Ans SuperLife DVD-R pack of 25.
I am able to burn SuperLife DVD-R successfully but with the imation DVD-R it wont even start the burning process.

I used Kprobe to get Media information.
Here are the details for SuperLife:
Disc Type DVD-R
Book Type DVD-R
Manufacturer Mitsubishi Chemical Corporation
Media ID MCC02RG20
Protection System None
Region 1,2,3,4,5,6,7,8
Capacity 4.38 GB
Free Size 4.38 GB
Free Blocks 2297888
Number of Layers 1
Linear Density 0.267 um/bit
Track Density 0.74 um/track
Maximum Read Speed 4.8x
Maximum Write Speed 8.0x
Current Write Speed 8.0x CLV
Write Speed Performance Descriptor 1 8.0x CLV
Write Speed Performance Descriptor 2 6.0x CLV
Write Speed Performance Descriptor 3 4.0x CLV

Here are the details for Imation DVD-R:
Disc Type DVD-R
Book Type DVD-R
Manufacturer FUJI Photo Film Co., Ltd.
Media ID FUJIFILM03
Protection System None
Region 1,2,3,4,5,6,7,8
Capacity 4.38 GB
Free Size 4.38 GB
Free Blocks 2297888
Number of Layers 1
Linear Density 0.267 um/bit
Track Density 0.74 um/track
Maximum Read Speed 4.8x
Maximum Write Speed 8.0x
Current Write Speed 8.0x CLV
Write Speed Performance Descriptor 1 8.0x CLV
Write Speed Performance Descriptor 2 6.0x CLV
Write Speed Performance Descriptor 3 4.0x CLV

Imation DVD-R are 8X & made in india.

Attached the drive Configuration and Error Screen.

I tried with all available write speed 4x 6x & 8x but was unable to burn.
The firmaware version of the drive is PS08.
Is this media not compatible with LiteOn or the drive is faulty?
Or Am I doing something wrong?

Here is the Nero error log



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 4:20:56 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <LITE-ON  DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : SAMSUNG DVD-ROM SD-616F          atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   I:   CDRom0
SAMSUNG DVD-ROM SD-616F    J:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 479MB (491040kB)
Free physical memory: 9MB (9976kB)
Memory in use       : 97 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

23.2.2006
ISO compilation
8:27:34 PM	#1 Text 0 File Isodoc.cpp, Line 6475
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : FALSE
	
8:27:35 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 531
	ReadBuffer-Pipe got 262144KB of Memory
	
8:27:35 PM	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
8:27:35 PM	#4 Text 0 File Writer.cpp, Line 122
	Writer LITE-ON  DVDRW SHW-160P6S running
	
8:27:35 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
8:28:01 PM	#6 Text 0 File Burncd.cpp, Line 3305
	Turn on Disc-At-Once, using DVD media
	
8:28:02 PM	#7 Text 0 File DlgWaitCD.cpp, Line 281
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1954719 (434:22.69, 3817MB)
	
8:28:02 PM	#8 Text 0 File DlgWaitCD.cpp, Line 293
	Write in overburning mode: NO (enabled: CD)
	
8:28:02 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2612
	Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
	 Disc Manufacturer: FUJIFI - LM03
	 Disc Application Code: 64, Disc Physical Code: 193
	
8:28:02 PM	#10 Text 0 File DlgWaitCD.cpp, Line 459
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:28:02 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1954720 (1954720) = #1954720/434:22.70
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1954720 blocks [LITE-ON  DVDRW SHW-160P6S]
	--------------------------------------------------------------
	
8:28:02 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [LITE-ON  DVDRW SHW-160P6S] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4003266560, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1954720 | lead-out |   1 |    0x41 | 0x00
	
8:28:02 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 38
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:28:02 PM	#14 Text 0 File SCSIPassThrough.cpp, Line 83
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
8:28:02 PM	#15 Phase 24 File dlgbrnst.cpp, Line 1685
	Caching of files started
	
8:28:03 PM	#16 Text 0 File Burncd.cpp, Line 4145
	Cache writing successful.
	
8:28:03 PM	#17 Phase 25 File dlgbrnst.cpp, Line 1685
	Caching of files completed
	
8:28:03 PM	#18 Phase 36 File dlgbrnst.cpp, Line 1685
	Burn process started at 8x (11,080 KB/s)
	
8:28:03 PM	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8:28:03 PM	#20 Text 0 File DVDR.cpp, Line 2707
	Recording mode: Sequential Recording Mode for Multisession
	
8:28:03 PM	#21 Text 0 File DVDR.cpp, Line 2863
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:28:03 PM	#22 Text 0 File Cdrdrv.cpp, Line 8647
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
8:28:27 PM	#23 SPTI -1046 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x30
	Sense Qual: 0x05
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
	Buffer x048b0000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
8:28:27 PM	#24 CDR -1046 File Writer.cpp, Line 311
	Illegal disc
	I: LITE-ON DVDRW SHW-160P6S
	
8:28:27 PM	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
8:28:28 PM	#26 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
8:28:29 PM	#27 Text 0 File DVDR.cpp, Line 3103
	EndDAO: Last written address was -1
	
8:28:29 PM	#28 Phase 133 File dlgbrnst.cpp, Line 1685
	Writing short lead-out
	
8:28:29 PM	#29 SPTI -1176 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x72
	Sense Qual: 0x04
	CDB Data:   0x5B 01 02 00 00 03 00 00 00 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 
	
8:28:29 PM	#30 CDR -1176 File WriterStatus.cpp, Line 167
	Session fixation error
	I: LITE-ON DVDRW SHW-160P6S
	
8:28:29 PM	#31 TRANSFER -24 File WriterStatus.cpp, Line 167
	Could not perform end of Disc-at-once
	
8:28:29 PM	#32 Phase 38 File dlgbrnst.cpp, Line 1685
	Burn process failed at 8x (11,080 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 3:53:02 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 8:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 4:20:56 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <LITE-ON  DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : SAMSUNG DVD-ROM SD-616F          atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   I:   CDRom0
SAMSUNG DVD-ROM SD-616F    J:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 479MB (491040kB)
Free physical memory: 157MB (161784kB)
Memory in use       : 67 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

23.2.2006
ISO compilation
8:30:54 PM	#1 Text 0 File Isodoc.cpp, Line 6475
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : FALSE
	
8:30:54 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 531
	ReadBuffer-Pipe got 68608KB of Memory
	
8:30:54 PM	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
8:30:54 PM	#4 Text 0 File Writer.cpp, Line 122
	Writer LITE-ON  DVDRW SHW-160P6S running
	
8:30:54 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
8:31:21 PM	#6 Text 0 File Burncd.cpp, Line 3305
	Turn on Disc-At-Once, using DVD media
	
8:31:22 PM	#7 Text 0 File DlgWaitCD.cpp, Line 281
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1954719 (434:22.69, 3817MB)
	
8:31:22 PM	#8 Text 0 File DlgWaitCD.cpp, Line 293
	Write in overburning mode: NO (enabled: CD)
	
8:31:22 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2612
	Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
	 Disc Manufacturer: FUJIFI - LM03
	 Disc Application Code: 64, Disc Physical Code: 193
	
8:31:22 PM	#10 Text 0 File DlgWaitCD.cpp, Line 459
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:31:22 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1954720 (1954720) = #1954720/434:22.70
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1954720 blocks [LITE-ON  DVDRW SHW-160P6S]
	--------------------------------------------------------------
	
8:31:22 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [LITE-ON  DVDRW SHW-160P6S] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4003266560, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1954720 | lead-out |   1 |    0x41 | 0x00
	
8:31:22 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 38
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:31:22 PM	#14 Text 0 File SCSIPassThrough.cpp, Line 83
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
8:31:22 PM	#15 Phase 24 File dlgbrnst.cpp, Line 1685
	Caching of files started
	
8:31:23 PM	#16 Text 0 File Burncd.cpp, Line 4145
	Cache writing successful.
	
8:31:23 PM	#17 Phase 25 File dlgbrnst.cpp, Line 1685
	Caching of files completed
	
8:31:23 PM	#18 Phase 36 File dlgbrnst.cpp, Line 1685
	Burn process started at 4x (5,540 KB/s)
	
8:31:23 PM	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8:31:23 PM	#20 Text 0 File DVDR.cpp, Line 2707
	Recording mode: Sequential Recording Mode for Multisession
	
8:31:23 PM	#21 Text 0 File DVDR.cpp, Line 2863
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:31:23 PM	#22 Text 0 File Cdrdrv.cpp, Line 8647
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
8:31:25 PM	#23 SPTI -1046 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x30
	Sense Qual: 0x05
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
	Buffer x03350000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
8:31:25 PM	#24 CDR -1046 File Writer.cpp, Line 311
	Illegal disc
	I: LITE-ON DVDRW SHW-160P6S
	
8:31:25 PM	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
8:31:25 PM	#26 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
8:31:26 PM	#27 Text 0 File DVDR.cpp, Line 3103
	EndDAO: Last written address was -1
	
8:31:26 PM	#28 Phase 133 File dlgbrnst.cpp, Line 1685
	Writing short lead-out
	
8:31:26 PM	#29 SPTI -1176 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x72
	Sense Qual: 0x04
	CDB Data:   0x5B 01 02 00 00 03 00 00 00 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 
	
8:31:26 PM	#30 CDR -1176 File WriterStatus.cpp, Line 167
	Session fixation error
	I: LITE-ON DVDRW SHW-160P6S
	
8:31:26 PM	#31 TRANSFER -24 File WriterStatus.cpp, Line 167
	Could not perform end of Disc-at-once
	
8:31:26 PM	#32 Phase 38 File dlgbrnst.cpp, Line 1685
	Burn process failed at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 3:53:02 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 8:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 4:20:56 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <LITE-ON  DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : SAMSUNG DVD-ROM SD-616F          atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   I:   CDRom0
SAMSUNG DVD-ROM SD-616F    J:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 479MB (491040kB)
Free physical memory: 163MB (167056kB)
Memory in use       : 65 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

23.2.2006
ISO compilation
8:32:07 PM	#1 Text 0 File Isodoc.cpp, Line 6475
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : FALSE
	
8:32:07 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 531
	ReadBuffer-Pipe got 68608KB of Memory
	
8:32:07 PM	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
8:32:07 PM	#4 Text 0 File Writer.cpp, Line 122
	Writer LITE-ON  DVDRW SHW-160P6S running
	
8:32:07 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
8:32:12 PM	#6 Text 0 File Burncd.cpp, Line 3305
	Turn on Disc-At-Once, using DVD media
	
8:32:12 PM	#7 Text 0 File DlgWaitCD.cpp, Line 281
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1954719 (434:22.69, 3817MB)
	
8:32:12 PM	#8 Text 0 File DlgWaitCD.cpp, Line 293
	Write in overburning mode: NO (enabled: CD)
	
8:32:12 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2612
	Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
	 Disc Manufacturer: FUJIFI - LM03
	 Disc Application Code: 64, Disc Physical Code: 193
	
8:32:12 PM	#10 Text 0 File DlgWaitCD.cpp, Line 459
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:32:12 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1954720 (1954720) = #1954720/434:22.70
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1954720 blocks [LITE-ON  DVDRW SHW-160P6S]
	--------------------------------------------------------------
	
8:32:12 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [LITE-ON  DVDRW SHW-160P6S] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4003266560, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1954720 | lead-out |   1 |    0x41 | 0x00
	
8:32:12 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 38
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:32:12 PM	#14 Text 0 File SCSIPassThrough.cpp, Line 83
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
8:32:13 PM	#15 Phase 24 File dlgbrnst.cpp, Line 1685
	Caching of files started
	
8:32:13 PM	#16 Text 0 File Burncd.cpp, Line 4145
	Cache writing successful.
	
8:32:13 PM	#17 Phase 25 File dlgbrnst.cpp, Line 1685
	Caching of files completed
	
8:32:13 PM	#18 Phase 36 File dlgbrnst.cpp, Line 1685
	Burn process started at 6x (8,310 KB/s)
	
8:32:14 PM	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8:32:14 PM	#20 Text 0 File DVDR.cpp, Line 2707
	Recording mode: Sequential Recording Mode for Multisession
	
8:32:14 PM	#21 Text 0 File DVDR.cpp, Line 2863
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:32:14 PM	#22 Text 0 File Cdrdrv.cpp, Line 8647
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
8:32:14 PM	#23 SPTI -1046 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x30
	Sense Qual: 0x05
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
	Buffer x03360000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
8:32:14 PM	#24 CDR -1046 File Writer.cpp, Line 311
	Illegal disc
	I: LITE-ON DVDRW SHW-160P6S
	
8:32:14 PM	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
8:32:14 PM	#26 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
8:32:15 PM	#27 Text 0 File DVDR.cpp, Line 3103
	EndDAO: Last written address was -1
	
8:32:15 PM	#28 Phase 133 File dlgbrnst.cpp, Line 1685
	Writing short lead-out
	
8:32:15 PM	#29 SPTI -1176 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x72
	Sense Qual: 0x04
	CDB Data:   0x5B 01 02 00 00 03 00 00 00 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 
	
8:32:15 PM	#30 CDR -1176 File WriterStatus.cpp, Line 167
	Session fixation error
	I: LITE-ON DVDRW SHW-160P6S
	
8:32:15 PM	#31 TRANSFER -24 File WriterStatus.cpp, Line 167
	Could not perform end of Disc-at-once
	
8:32:15 PM	#32 Phase 38 File dlgbrnst.cpp, Line 1685
	Burn process failed at 6x (8,310 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 3:53:02 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 8:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 4:20:56 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <LITE-ON  DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : SAMSUNG DVD-ROM SD-616F          atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   I:   CDRom0
SAMSUNG DVD-ROM SD-616F    J:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 479MB (491040kB)
Free physical memory: 5MB (5468kB)
Memory in use       : 98 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

23.2.2006
ISO compilation
8:33:28 PM	#1 Text 0 File Isodoc.cpp, Line 6475
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : FALSE
	
8:33:28 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 531
	ReadBuffer-Pipe got 262144KB of Memory
	
8:33:28 PM	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
8:33:28 PM	#4 Text 0 File Writer.cpp, Line 122
	Writer LITE-ON  DVDRW SHW-160P6S running
	
8:33:28 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
8:33:32 PM	#6 Text 0 File Burncd.cpp, Line 3305
	Turn on Disc-At-Once, using DVD media
	
8:33:32 PM	#7 Text 0 File DlgWaitCD.cpp, Line 281
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1954815 (434:24.15, 3817MB)
	
8:33:32 PM	#8 Text 0 File DlgWaitCD.cpp, Line 293
	Write in overburning mode: NO (enabled: CD)
	
8:33:32 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2612
	Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
	 Disc Manufacturer: FUJIFI - LM03
	 Disc Application Code: 64, Disc Physical Code: 193
	
8:33:32 PM	#10 Text 0 File DlgWaitCD.cpp, Line 459
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:33:32 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1954816 (1954816) = #1954816/434:24.16
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1954816 blocks [LITE-ON  DVDRW SHW-160P6S]
	--------------------------------------------------------------
	
8:33:32 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [LITE-ON  DVDRW SHW-160P6S] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4003463168, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1954816 | lead-out |   1 |    0x41 | 0x00
	
8:33:32 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 38
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:33:32 PM	#14 Text 0 File SCSIPassThrough.cpp, Line 83
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
8:33:32 PM	#15 Phase 24 File dlgbrnst.cpp, Line 1685
	Caching of files started
	
8:33:33 PM	#16 Text 0 File Burncd.cpp, Line 4145
	Cache writing successful.
	
8:33:33 PM	#17 Phase 25 File dlgbrnst.cpp, Line 1685
	Caching of files completed
	
8:33:33 PM	#18 Phase 36 File dlgbrnst.cpp, Line 1685
	Burn process started at 8x (11,080 KB/s)
	
8:33:33 PM	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8:33:34 PM	#20 Text 0 File DVDR.cpp, Line 2707
	Recording mode: Sequential Recording Mode for Multisession
	
8:33:34 PM	#21 Text 0 File DVDR.cpp, Line 2863
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:33:34 PM	#22 Text 0 File Cdrdrv.cpp, Line 8647
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
8:33:41 PM	#23 SPTI -1046 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x30
	Sense Qual: 0x05
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
	Buffer x04890000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
8:33:41 PM	#24 CDR -1046 File Writer.cpp, Line 311
	Illegal disc
	I: LITE-ON DVDRW SHW-160P6S
	
8:33:42 PM	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
8:33:42 PM	#26 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
8:33:42 PM	#27 Text 0 File DVDR.cpp, Line 3103
	EndDAO: Last written address was -1
	
8:33:42 PM	#28 Phase 133 File dlgbrnst.cpp, Line 1685
	Writing short lead-out
	
8:33:42 PM	#29 SPTI -1176 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x72
	Sense Qual: 0x04
	CDB Data:   0x5B 01 02 00 00 03 00 00 00 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 
	
8:33:42 PM	#30 CDR -1176 File WriterStatus.cpp, Line 167
	Session fixation error
	I: LITE-ON DVDRW SHW-160P6S
	
8:33:42 PM	#31 TRANSFER -24 File WriterStatus.cpp, Line 167
	Could not perform end of Disc-at-once
	
8:33:42 PM	#32 Phase 38 File dlgbrnst.cpp, Line 1685
	Burn process failed at 8x (11,080 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 3:53:02 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 8:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 4:20:56 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <LITE-ON  DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : SAMSUNG DVD-ROM SD-616F          atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   I:   CDRom0
SAMSUNG DVD-ROM SD-616F    J:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 479MB (491040kB)
Free physical memory: 32MB (33416kB)
Memory in use       : 93 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

23.2.2006
ISO compilation
8:33:58 PM	#1 SPTI -1033 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
8:33:58 PM	#2 SPTI -1033 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
8:33:59 PM	#3 SPTI -1033 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
8:34:00 PM	#4 SPTI -1033 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
8:34:06 PM	#5 SPTI -1033 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
8:34:07 PM	#6 SPTI -1033 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 
	
8:34:27 PM	#7 Text 0 File Isodoc.cpp, Line 6475
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : FALSE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : FALSE
	
8:34:28 PM	#8 Text 0 File ThreadedTransfer.cpp, Line 531
	ReadBuffer-Pipe got 262144KB of Memory
	
8:34:28 PM	#9 Text 0 File Reader.cpp, Line 124
	Reader running
	
8:34:28 PM	#10 Text 0 File Writer.cpp, Line 122
	Writer LITE-ON  DVDRW SHW-160P6S running
	
8:34:28 PM	#11 ISO9660GEN -11 File geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
8:34:53 PM	#12 Text 0 File Burncd.cpp, Line 3305
	Turn on Disc-At-Once, using DVD media
	
8:34:53 PM	#13 Text 0 File DlgWaitCD.cpp, Line 281
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1954543 (434:20.43, 3817MB)
	
8:34:53 PM	#14 Text 0 File DlgWaitCD.cpp, Line 293
	Write in overburning mode: NO (enabled: CD)
	
8:34:53 PM	#15 Text 0 File DlgWaitCD.cpp, Line 2612
	Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
	 Disc Manufacturer: FUJIFI - LM03
	 Disc Application Code: 64, Disc Physical Code: 193
	
8:34:53 PM	#16 Text 0 File DlgWaitCD.cpp, Line 459
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:34:53 PM	#17 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1954544 (1954544) = #1954544/434:20.44
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1954544 blocks [LITE-ON  DVDRW SHW-160P6S]
	--------------------------------------------------------------
	
8:34:53 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [LITE-ON  DVDRW SHW-160P6S] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4002906112, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1954544 | lead-out |   1 |    0x41 | 0x00
	
8:34:53 PM	#19 Text 0 File SCSIPassThrough.cpp, Line 38
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:34:53 PM	#20 Text 0 File SCSIPassThrough.cpp, Line 83
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
8:34:53 PM	#21 Phase 24 File dlgbrnst.cpp, Line 1685
	Caching of files started
	
8:34:54 PM	#22 Text 0 File Burncd.cpp, Line 4145
	Cache writing successful.
	
8:34:54 PM	#23 Phase 25 File dlgbrnst.cpp, Line 1685
	Caching of files completed
	
8:34:54 PM	#24 Phase 36 File dlgbrnst.cpp, Line 1685
	Burn process started at 8x (11,080 KB/s)
	
8:34:54 PM	#25 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8:34:54 PM	#26 Text 0 File DVDR.cpp, Line 2707
	Recording mode: Sequential Recording Mode
	
8:34:54 PM	#27 Text 0 File DVDR.cpp, Line 2863
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:34:54 PM	#28 Text 0 File Cdrdrv.cpp, Line 8647
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
8:35:02 PM	#29 SPTI -1046 File SCSIPassThrough.cpp, Line 289
	I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x30
	Sense Qual: 0x05
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
	Buffer x04890000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
8:35:02 PM	#30 CDR -1046 File Writer.cpp, Line 311
	Illegal disc
	I: LITE-ON DVDRW SHW-160P6S
	
8:35:03 PM	#31 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
8:35:03 PM	#32 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
8:35:03 PM	#33 Text 0 File DVDR.cpp, Line 3103
	EndDAO: Last written address was -1
	
8:35:03 PM	#34 Phase 38 File dlgbrnst.cpp, Line 1685
	Burn process failed at 8x (11,080 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 3:53:02 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 8:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Mh, you already tried with other media that works, that’s good.
Disable Multisession and maybe try with disconnected Samsung DVD-ROM if nothing helps.

Of course search for an firmware update for your burner, if possible.
Probably you need an updated firmware to solve this Imation problem.

I’m new to being a Liteon DVD burner user, but I’d seen that these FUJIFILM03 discs would not burn on at least one of the other …6S series Liteons, although I think the latest firmware release resolved this. I have the same burner as you and PS08 is unfortunately the latest firmware release at this time. You’ll probably just have to hold on to the FUJIFILM03 discs until Liteon decides to fix the problem. Some of the Liteons, this drive included, have had reported problems where the -R discs are not burned to be compatible with most standalone DVD players. Do your -R burns with this drive play back fine on you standalone DVD player(s)? I haven’t tried yet but I’ll find out within 10 minutes or so as I’m about to burn a disc.

Since I mentioned it in my last post, I figured I should follow up on my comments about potential incompatibility with -R burns and standalone players. The -R that I just burned played fine on the two players I tried it on. Having said that, the two players I tried it on were not the best tests as I tested it in a DVD Recorder and a Divx/Xvid playing DVD Player, both of which are very capable at playing less than perfect discs. So both players are about the furthest thing from picky players, a pickier player may yet have issues.

The problem with the drive on -r disks seems to be at the start of the disk it seems to start writing ferver into the disk .The circle at the start is bigger than my last liteon-drive and any drive I have had in the past, Seems mad they can sell this drive when it just isn’t right.

Disabled Multisession and then tried to burn, same problem.
Disconnected Samsung DVD-ROM and then tried to burn still the same problem.
Yes I have the latest firmware installed i.e PS08.

I tried Imation DVD-R (Fujifilm03) from different parts of the spindle i.e from the top, middle and the bottom all have same issue.

if you paid attention to the 165P6s/165H6s thread, pulsee stated that it took an upgrade to MS0K for the 165P6s to burn fujifilm03 media. since liteon has not released any updates for other 6S drives, I assume you’ll need to wait for a firmware update.

i have a LITE-ON DVDRW SHW-160P6S PS08 driver…
and i have to press the open button 15-20 times before it opens, i dont know why…!!!11
And also i cant burn on dvd-R only dvd +R.

does anyone know why that is?