Liteon iHAS124, 224, 324, 424, 524, 624 C (DH24AC)

vbimport

#46

Dunno whether C and D models are really use other hardware, maybe only the FW is different

C and D have different boards, but main chip is the same.


#47

Thank you for the info :slight_smile:

But it´s a bit like LG, new models without big difference


#48

2601, i tried to PM you but it says you have too many PM’s and i cant send you anymore, kinda sucks, so…heres what i was wondering…

i see you have that asus drive with the iHAS124C firmware (LL0G) flashed, i dunno if you saw my thread or not http://club.myce.com/f44/liteon-ihas124c-crossflashing-firmware-333397/#post2696164

but if you could check that out and if you could hook up the .bin and eeprom from that drive so i could progress easier with the program i’m working on writing in cpp to extract firmware from the new flashers and make convert it to a .bin (there are minor changes made when its flashing) as well as work on the crossflashing technique for the PLDS c clones, thatd be a major help…i’m trying to finish this app up so we can extract firmwares successfully from the scrambled flashing exe’s liteon released, and i’m almost there…

hopefully you can help me out, instructions are in the thread i linked to above if you need them, but i doubt you do.

thanks in advance.


#49

Liteon 324 C @Plextor PX-891SA ?


#50

Asus DRW-24B5ST (Liteon 324 C clone)


#51

[QUOTE=DroiDMester;2700668]Liteon 324 C @Plextor PX-891SA ?[/QUOTE]

Here you go. No need to modify eeprom.


#52

[QUOTE=DroiDMester;2700669]Asus DRW-24B5ST (Liteon 324 C clone)[/QUOTE]

I put the 124C firmware on that drive successfully, check out my thread if your interested.


#53

So what´s the “sure” thing if you want a MTK-Liteon? Only the drives with features like SmartErase and Labeltag (324, 524)?


#54

[B]Wischmop[/B], 524 - yes (latest version was D, it uses MediaTek chipset), 324 - can use Renesas chipset (324 W).


#55

Thx :slight_smile:


#57

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Sony 16x DVD-R (MIT)
MID: RITEKF1
Stamper Code: DR5FA1-00547
Hub Serial: ZL309090707B15
Burn Speed: 16x
SmartBurn: On
Force HyperTuning: Off
Online HyperTuning: Off
Over Speed Writing: Off
Burning Software: Nero CD-DVD Speed 4.7.7.16

Since I was away from the site for a while, I didn’t know of the demise of Daxon and the subsequent disappearance of Sony MID media from the North American market, so I bought these in ignorance :doh:


#58

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Verbatim 16x DVD+R white inkjet printable(MIT)
MID: MCC004
Stamper Code: ZD5174-DVR-T47D
Hub Serial: 7012E1023+01508E12
Burn Speed: 16x
SmartBurn: On
Force HyperTuning: Off
Online HyperTuning: Off
Over Speed Writing: Off
Burning Software: Nero CD-DVD Speed 4.7.7.16

This drive seems to have issues with the outer edge of discs when burning at high speeds.


#59

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Memorex 16x DVD+R (MIT)
MID: RITEKF16
Stamper Code: VR5F16-00829 L2
Hub Serial: KI305175010A05
Burn Speed: 16x
SmartBurn: On
Force HyperTuning: Off
Online HyperTuning: Off
Over Speed Writing: Off
Burning Software: Nero CD-DVD Speed 4.7.7.16


#60

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Verbatim 16x DVD+R white inkjet printable(MIT)
MID: MCC004
Stamper Code: ZD5174-DVR-T47D
Hub Serial: 7012E1024+01507E12
Burn Speed: 16x
SmartBurn: On
Force HyperTuning: [B]On[/B]
Online HyperTuning: [B]On[/B]
Over Speed Writing: [B]On[/B]
Burning Software: Nero CD-DVD Speed 4.7.7.16

Enabling either OHT, FHT, or both, improved MCC004 burn quality.


#61

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Verbatim 8x DVD+R DL (MIUAE)
MID: MKM 003
Stamper Code L0: ZE4393-DVR-X850B
Stamper Code L1: ZE5257-DVR-X851K
Hub Serial: FA34T6K2132122T3
Burn Speed: 8x
SmartBurn: On
Force HyperTuning: On
Online HyperTuning: On
Over Speed Writing: On
Burning Software: Nero CD-DVD Speed 4.7.7.16

FTI-made Mitsubishi DL media isn’t bad. The disc got scratched near the outer edge before I did the scan in the 891SA, explaining the high PIE/PIF near the layer break. Interestingly, it seems this disc was intended for a wide printable surface as the hub is silver coated.


#62

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: FalconMedia Pro 8x DVD+R DL white inkjet hub printable (MIUAE)
MID: FTI R08
Stamper Code L0: L00218J11213
Stamper Code L1: L1110207J1071104
Hub Serial: C2AH A24A N401010045A521
Burn Speed: 8x
SmartBurn: On
Force HyperTuning: Off
Online HyperTuning: Off
Over Speed Writing: Off
Burning Software: Nero CD-DVD Speed 4.7.7.16

So apparently this FTI DL media is just RICOHJPN D01 with a better supported MID? Still using Ricoh stampers. Whatever the case, this is good stuff.


#63

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Verbatim 16x DVD+R white inkjet printable(MIT)
MID: MCC004
Stamper Code: ZD5176-DVR-T47D
Hub Serial: PAPA16KC30005799 2
Burn Speed: 20x
SmartBurn: On
Force HyperTuning: [B]On[/B]
Online HyperTuning: [B]On[/B]
Over Speed Writing: [B]On[/B]
Burning Software: Nero CD-DVD Speed 4.7.7.16


#64

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Kodak 16x DVD+R (MII)
MID: MBIPG101 R05
Stamper Code L0: NO102P DVDPLUSR 16X B
Hub Serial: 3113 402 +R E B 03642
Burn Speed: 16x
SmartBurn: On
Force HyperTuning: Off
Online HyperTuning: Off
Over Speed Writing: Off
Burning Software: Opti Drive Control 1.70


#65

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: Kodak 8x DVD+R DL (MII)
MID: MBIPG101 R10
Stamper Code L0: W1013R DVD+R DL0 MBI
Stamper Code L1: XB020Q DVD+R DL1 MBI
Hub Serial: 1163 807 +R DL C C 18559
Burn Speed: 8x
SmartBurn: On
Force HyperTuning: Off
Online HyperTuning: Off
Over Speed Writing: Off
Burning Software: Opti Drive Control 1.70


#66

Burner: MRX-550L V5@PX-891SA
Firmware: 1.06
Media: HP 8x DVD+R DL white inkjet hub printable (MIT)
MID: CMC MAG D03
Stamper Code L0: CPDR85F-RDEWIPF0A-376 0322
Stamper Code L1: CPDR85S-RDEWIPS0B-3001 4100
Hub Serial: IPRH604QF30071046 34B
Burn Speed: 8x
SmartBurn: On
Force HyperTuning: Off
Online HyperTuning: Off
Over Speed Writing: Off
Burning Software: Opti Drive Control 1.70