LiteOn 165P6S Test Firmware Results

HyperTuning, SmartBurn, and OverSpeed. These are all part of the 3.1.1.6 Liteon Utility.

165P6S - MV7U

Verbatim MCC004 @ 12x (a different batch to what I’ve been using recently)
HT: On
OS: On
Burn time: 6:14

Why bother to burn at 16x. :slight_smile: Scanned in the 1635S because I seem to be getting a 300% increase in PIFs in the 165P6S.



something strange is going on :confused:

here a short summary of what happened

[ol]
[li]post 5 in this thread shows an exellent burning graph for MCC004
[/li][li]After this burn I tried Prodisc_R05 with HT/OS off and the drive didn’t go above 8x (see post 7).
[/li][li]Then Prodisc_R05 HT/OS on --> the drive reaches 12x (post 8)
[/li][li]Prodisc_R05 HT/OS on --> 16x, but strong buffer fluctuations and spikes in the writing graph (post 14) at the end of the burn 3.8GB+
[/li][li]same graph as for Prodisc_R05 also for MCC004
[/li][li]I flashed back to MV7N
[/li][li]again same result for MCC004 and Prodisc
[/li][li]flash to MV7U again
[/li][li]MCC004 --> same result
[/li][li]Prodisc_F02 --> result ok, good looking graph
[/li][li]Prodisc_R05 --> again only 8x (aborted)
[/li][li]Prodisc_R05 --> everthing ok, excellent burning graph
[/li][/ol]

H3rB3i, here is my comment:

  1. Please check the burn is using HT or not by the LED flashing method.
  2. If the burn is using HT, the writing speed maybe down to lower because of some troubles during HT learning.
  3. The strange graph maybe buffer under run or something else, can you confirm that System was not doing something at the time? If you can confirm that, then I have no idea why this happened.

FW vMV7U

Max Max DVD-R GSC003 @8x
HT: On
OS: Off
SB: On
Burn time: 8:01



  1. Please check the burn is using HT or not by the LED flashing method.
  2. If the burn is using HT, the writing speed maybe down to lower because of some troubles during HT learning.
  3. The strange graph maybe buffer under run or something else, can you confirm that System was not doing something at the time? If you can confirm that, then I have no idea why this happened.

Thanks for the quick reply,

to 1.) HT was always on (not 100% sure if the LED flashed different but at least 99%), except from the burn which is shown in post 7
to 2.) It would be no problem if this happens, but HT was off when Prodisc_R05 was burned the first time (post 7)
to 3.) except from the usual background processes, the system wasn’t doing anything. These “fluctuations” started at the exact same point, for both MCC004 and Prodisc_R05

Anyway, everthing looks good again :wink: and I hope that this won’t happen anymore.

This post can be deleted if the mods wish, but damn! That is a bloody good scan, Pulsee! :clap:

Thanks Alexanderino
Here One I Tried At OverSpeeding @12x
Results Not Great, But Not That Bad For The Media I’m Using. :rolleyes:

FW vMV7U

Max Max DVD-R GSC003 @12x (Very Cheap Media)
HT: On
OS: On
SB: On
Burn time: 6:16

MCC 004 MIT Verbatim-branded burned @ 8x with CDSpeed 4.11. SB, HT and OS all on.



Panasonic branded printable TYG02 @ 8x with CDSpeed 4.11. SB, HT and OS all on.



Plextor branded T03 @ 8x with CDSpeed 4.11. SB, HT and OS all on.

I’ve never rated this media and still don’t.


FW vMV7U

Sony DVD+R SONY D11 @12x
HT: On
OS: On
SB: On
Burn time: 6:16



FW vMV7U

Sony DVD-R SONY 08D1 @12x
HT: On
OS: On
SB: On
Burn time: 6:17



FW vMV7U

OEM TAIYO YUDEN DVD-R TYG02 @12x
HT: On
OS: On
SB: On
Burn time: 6:22



FW vMV7U

Datastream DVD+R CMC MAG E01 @12x
HT: On
OS: On
SB: On
Burn time: 6:45



FW vMV7U

TEAC DVD-R FUJIFILM03 @12x
HT: On
OS: On
SB: On
Burn time: 6:18



FW vMV7U

Verbatim DVD-R MCC 02RG20 @12x
HT: On
OS: On
SB: On
Burn time: 6:21



FW vMV7U

Verbatim DVD+R MCC 003 @12x
HT: On
OS: On
SB: On
Burn time: 6:19



FW vMV7U

RiTEK DVD-R G05 @8x (Selected 12x But Burnt At 8x)
I Believe This Batch Is Defective Darker Dye Spots On Discs.
HT: On
OS: On
SB: On
Burn time: 8:07



FW vMV7U

Mag Media DVD+R MJC 003 @12x
HT: On
OS: On
SB: On
Burn time: 8:21