Lite on SHM 165P6S wont burn dvd but can burn cds need some help

vbimport

#1

hey guyz 1st time on this forum and been looking around for answer with the problem with my burner. its a Lite on SHM 165P6S burner and just recently i wasnt able to burn a dvd format of any kind. data,dvd movie or anything burned on a dvd it wont do it. i try to burn a cd it did work alright but it took a while to burn the audio cd (around 8 minutes which is far too long) anyway i save the log file for nero and would like to know if its a firmware, virus or the hardware is gone and needed to be replaced. thanks for the help, gemz

********** Nero Recode 2 **********

Version: 2.1.1.21

Vic

Project type: Copy entire DVD
Target size: DVD5 (2282925)

Burn settings:
Target: LITE-ON  DVDRW SHM-165P6S
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\User\My Documents\Nero Recode (90394742784 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

19:42:43	File burn_dvdfiles.cpp, Line 231
	Compile DVD: init

VMG Menus Vobs [21 vobus] 2.30MB -> 2.30MB [R 1.00]
Video: 2.25MB, extra: 0.05MB
Audio: 0 streams
Subpicture: 1 streams
 0.  0. Unspecified 0.00MB [enabled]

VTS_01 Title Vobs [15798 vobus] 2335.42MB -> 2335.42MB [R 1.00]
Video: 2121.08MB, extra: 214.35MB
Audio: 1 streams
 0.  0. Dolby Digital 2-ch English 183.49MB [enabled]
Subpicture: 0 streams

19:42:43	File burn_dvdfiles.cpp, Line 1153
	Compile DVD: begin copy 1

19:42:43	File NeroRecorderBase.cpp, Line 448
	Writing to disc: DVD-R

19:42:43	File NeroRecorderBase.cpp, Line 462
	Free capacity on disc: 2286468 sectors (2298496)

19:42:44	File burn_dvdfiles.cpp, Line 480
	Compile DVD: burning 2286468 sectors (1197005 required)

19:42:44	File burn_dvdfiles.cpp, Line 657
	Compile DVD: adjust target size to 4465.76MB (2337.90MB obtained)

19:42:44	File burn_dvdfiles.cpp, Line 525
	Compiling DVD Volume started

19:42:44	File vob_record.cpp, Line 642
	DirectBurn offset: VIDEO_TS.VOB 16

19:42:44	File burn_dvdfiles.cpp, Line 1059
	Compile DVD: finished VMG Menus Vobs

VMG Menus Vobs:
Original 2.30MB -> Expected 2.30MB -> Output 2.30MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 21
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.04MB
Source video size = 2.26MB
Pictures Modified [I 0] [P 0] [B 0]

19:42:46	File vob_record.cpp, Line 642
	DirectBurn offset: VTS_01_1.VOB 1296

19:44:15	File NeroRecorder.cpp, Line 637
	Burn failed (3)

----- Begin NeroAPI error log -----


Windows XP 5.1

IA32

WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 4:03:36 PM 

ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM 

Nero API version: 6.6.0.17

Using interface version: 6.3.1.11

Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\

Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 17c


Recorder:             <LITE-ON DVDRW SHM-165P6S>Version: MS0M - HA 1 TA 0 - 6.6.0.17

 Adapter driver:      <atapi>                   HA 1

 Drive buffer  :      2048kB

 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 



=== Scsi-Device-Map ===

DiskPeripheral       : WDC WD2500JS-00NCB1              atapi Port 0 ID 0  DMA: On 

CdRomPeripheral      : LITE-ON DVDRW SHM-165P6S         atapi Port 1 ID 0  DMA: Off



=== CDRom-Device-Map ===

LITE-ON DVDRW SHM-165P6S   D:   CDRom0

=======================



AutoRun : 1

Excluded drive IDs: 

WriteBufferSize: 83886080 (0) Byte

ShowDrvBufStat : 0

BUFE           : 0

Physical memory     : 1015MB (1039852kB)

Free physical memory: 668MB (684152kB)

Memory in use       : 34 

Uncached PFiles: 0x0

Use Inquiry    : 1

Global Bus Type: default (0)

Check supported media : Disabled (0) 



10.3.2007

NeroAPI

7:42:44 PM	#1 Text 0 File DlgWaitCD.cpp, Line 270

	Last possible write address on media:  2298495 (510:46.45, 4489MB)

	Last address to be written:                 -1 (  0:00.-1,    0MB)

	

7:42:44 PM	#2 Text 0 File DlgWaitCD.cpp, Line 282

	Write in overburning mode: NO

	

7:42:44 PM	#3 Text 0 File DlgWaitCD.cpp, Line 2483

	Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD-R

	 Disc Manufacturer: PRINCO - 

	 Disc Application Code: 64, Disc Physical Code: 193

	

7:42:44 PM	#4 Text 0 File DlgWaitCD.cpp, Line 448

	>>> Protocol of DlgWaitCD activities: <<<

	=========================================

	

7:42:44 PM	#5 Text 0 File DVDR.cpp, Line 2505

	Recording mode: Sequential Recording Mode for Multisession

	

7:42:44 PM	#6 Text 0 File Mmc.cpp, Line 21732

	Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

	

7:42:44 PM	#7 Text 0 File DVDR.cpp, Line 2660

	Start write address at LBA 0

	DVD high compatibility mode: No

	

7:42:44 PM	#8 Text 0 File Cdrdrv.cpp, Line 8892

	---- DVD Structure: Physical Format Information (00h) ----

	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)

	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)

	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable

	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track

	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

	 End Physical Sector Number of Data Area:      26127F h

	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)

	 Data in Burst Cutting Area (BCA) does not exist

	  Start sector number of the current Border-Out: 0 h

	  Start sector number of the next Border-In:     0 h

	 Media Specific [16..63]:

	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................

	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................

	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................

	

7:42:44 PM	#9 Text 0 File BurnAtOnceRecorder.cpp, Line 1005

	Estimated filesystem size: 544

	

7:42:44 PM	#10 Phase 36 File APIProgress.cpp, Line 276

	Burn process started at 4x (5,540 KB/s)

	

7:42:44 PM	#11 Text 0 File BurnAtOnceRecorder.cpp, Line 1686

	Buffering files started

	

7:42:44 PM	#12 Text 0 File BurnAtOnceRecorder.cpp, Line 1407

	Buffering VIDEO_TS.VOB

	

7:42:44 PM	#13 Text 0 File BurnAtOnceRecorder.cpp, Line 2562

	Finished buffering file VIDEO_TS.VOB of size 2410496 bytes (1177 sectors)

	

7:42:44 PM	#14 Text 0 File BurnAtOnceRecorder.cpp, Line 2629

	Finished writing file VIDEO_TS.VOB of size 2410496 bytes (1177 sectors)

	

7:42:44 PM	#15 Text 0 File BurnAtOnceRecorder.cpp, Line 2642

	Buffering files finished successfully

	

7:42:46 PM	#16 Text 0 File BurnAtOnceRecorder.cpp, Line 675

	Reserved fragment at 0. Length: 1776

	

7:42:46 PM	#17 Text 0 File BurnAtOnceRecorder.cpp, Line 1869

	Reserved start fragment at 0

	

7:42:46 PM	#18 Text 0 File BurnAtOnceRecorder.cpp, Line 675

	Reserved fragment at 1776. Length: 64

	

7:42:46 PM	#19 Text 0 File BurnAtOnceRecorder.cpp, Line 1401

	Writing VTS_01_1.VOB at sector 1840

	

7:44:15 PM	#20 SCSI -1135 File Cdrdrv.cpp, Line 1436

	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02215200

	Status:     0x04 (0x01, SCSI_ERR)

	HA-Status   0x00 (0x00, OK)

	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)

	Sense Key:  0x03 (KEY_MEDIUM_ERROR)

	Sense Code: 0x0C

	Sense Qual: 0x00

	CDB Data:   0x2A 0x00 0x00 0x00 0x07 0x40 0x00 0x00 0x10 0x00 0x00 0x00 

	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 

	            0x00 0x00 0x00 0x00 0x0C 0x00 

	

7:44:15 PM	#21 Text 0 File BurnAtOnceRecorder.cpp, Line 2113

	Failed to write cache to disc at 1872

	

7:44:15 PM	#22 Phase 179 File APIProgress.cpp, Line 276

	Writing file to disc failed

	

7:44:15 PM	#23 Text 0 File BurnAtOnceRecorder.cpp, Line 3629

	Disc info:

	Partitions: 2

	  #0: Start: 0, Size: 1760

	  #1: Start: 1776, Size: 48

	

7:44:15 PM	#24 SCSI -1064 File Cdrdrv.cpp, Line 1436

	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02215200

	Status:     0x04 (0x01, SCSI_ERR)

	HA-Status   0x00 (0x00, OK)

	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)

	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

	Sense Code: 0x21

	Sense Qual: 0x00

	CDB Data:   0x2A 0x00 0x00 0x00 0x07 0x40 0x00 0x00 0x10 0x00 0x00 0x00 

	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 

	            0x00 0x00 0x00 0x00 0x21 0x00 

	

7:44:17 PM	#25 Phase 38 File APIProgress.cpp, Line 276

	Burn process failed at 4x (5,540 KB/s)

	



Existing drivers:

File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 8:16:24 AM 

File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 4:03:36 PM 

File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/17/2006 7:23:54 AM (Prassi/Veritas driver for win 2K)



Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 




----- End NeroAPI error log -----


19:44:18	File burn_dvdfiles.cpp, Line 300
	Compile DVD: exit

#2

I see this in the log:
CdRomPeripheral : LITE-ON DVDRW SHM-165P6S atapi Port 1 ID 0 DMA: Off

You’ll want to get DMA on. If you are using the old 40 conductor IDE ribbon cable, that would do it. You should be using the 80 conductor cable. Usually called Ultra ATA 100/133 cable.

There is some help here on DMA:
http://club.cdfreaks.com/showthread.php?t=101616

Running without DMA, or in other words, running in PIO mode would explain the slow CD burn. I’m not sure if that’s the only problem you have with DVDs.

Can you read DVDs?

In the future, you will probably get more help on optical drives in the Optical Drives forum. Yes I know it’s confusing. Too many forums to keep straight. And they don’t like cross posting either. :slight_smile:
http://club.cdfreaks.com/forumdisplay.php?f=61


#3

Also, burning Princo discs isn’t such a hot idea…maybe try better media like Verbatim, too. :wink: