Today, i found out, that my new SO was using Nvidia drivers IDE… :Z
So, i did dig here in the fÃ³rum, and found this:
Right click on my computer->Properties->
Hardware tab->Device manager (middle -right)
Expand IDE ATA/ATAPI controllers
Will have intel / Via / nvidia Ultra ATA storage controller (or similar)
Don’t do the primary or secondary channels. They are children of the main.
Right click on the Via /Intel / Nvidia Ultra ATA / IDE controlller and select “Update driver”.
Then select “install from a list or specific location”-> next
Select “Don’t search. i will choose the driver to install” -> next
Select “standard Dual Channel PCI IDE Controller (or similar)” -> next
Reboot machine to take effect.
I did it, and star a new burn, with Nero, at 12X, with MCC004.
Just before i start, i did check SmartBurn3116, and finally they work!
So i put HT and SB…
Happly, i did star my first burn at 12X… :o
Waht in hell could go wrong?
DMA is ON…i do not understand…