Lite-On 411s "Disc has changed" error

CD, DVD and (Ultra HD) Blu-ray Writers LiteOn / PLDS / Sony Writer
#1

I’m not sure if this a software (Nero 6.0.0.19), hardware (Lite-On 411s) or media (Ritek G04 4x -R) issue.

I know that this drive has trouble with cheap media but these Ritek disks aren’t usually classed as cheap but when I try and burn at 4x on them I get a “Write Failed at 4x, Disc has changed” error from Nero, even before it has started burning. I also get the error when simulating. I also got the same error with a TDK 4x -R Taiyo Uden disk.

As soon I drop it back to 2x everything works fine, can read on my stand alone player, and DVD-Rom.

Has anybody some across this error?

From the log attached I can seen that DMA is turned off on all my drives which I shall rectify when I get home.

Error is a 9:50:52pm near the bottom

#2

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 27/07/2003 5:38:52 PM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 3:25:04 PM
Nero version: 6.0.0.19
Recorder: <LITE-ON DVDRW LDW-411S> Version: FS02 - HA 1 TA 3 - 6.0.0.19
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW LDW-411S >Version: FS02 - HA 1 TA 3 - 6.0.0.19
Adapter driver: <> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTLA-307045 TX6O nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800JB-00ETA0 77.0 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : SONY CD-RW CRX175E 1.0j nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LDW-411S FS02 nvidesm Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-411S H: CDRom1
SONY CD-RW CRX175E G: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 179MB (184204kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.10.2003
UDF/ISO compilation
9:50:27 PM #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

9:50:27 PM #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

9:50:27 PM #3 Text 0 File Isodoc.cpp, Line 5950
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:50:27 PM #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

9:50:27 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

9:50:27 PM #6 Text 0 File Writer.cpp, Line 127
Writer LITE-ON DVDRW LDW-411S running

9:50:27 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

9:50:27 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

9:50:27 PM #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

9:50:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2286415 (508:05.40)

9:50:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

9:50:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R
Disc Manufacturer: TYG01 -
Disc Application Code: 64, Disc Physical Code: 193

9:50:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:50:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286416 (2286416) = #2286416/508:5.41
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286416 blocks [LITE-ON DVDRW LDW-411S ]
--------------------------------------------------------------

9:50:33 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [LITE-ON DVDRW LDW-411S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682887168, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286416 | lead-out | 1 | 0x00 | 0x41

9:50:33 PM #16 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

9:50:33 PM #17 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

9:50:33 PM #18 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 4x (5,520 KB/s)

9:50:34 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:50:35 PM #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 14:10,383 (850383ms) -> OK

9:50:35 PM #21 Text 0 File DVDR.cpp, Line 1457
Recording mode: Sequential Recording Mode

9:50:36 PM #22 Text 0 File Mmc.cpp, Line 19195
Set BUFE: supported -> ON , Generic write control : ON

9:50:36 PM #23 Text 0 File DVDR.cpp, Line 1572
Start write address at LBA 0
DVD high compatibility mode: Yes

9:50:36 PM #24 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

9:50:44 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 3, LUN 0, buffer 0x07D40000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

9:50:44 PM #26 Text 0 File Writer.cpp, Line 455
21:50:44.875 LITE-ON DVDRW LDW-411S : WriteBuffer reduced to 32768 Bytes

9:50:44 PM #27 Text 0 File Writer.cpp, Line 318
21:50:44.890 - LITE-ON DVDRW LDW-411S : Queue again later (Intervall : 11msec)

9:50:52 PM #28 SCSI -1076 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 3, LUN 0, buffer 0x07D40000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00

9:50:52 PM #29 CDR -1076 File Writer.cpp, Line 335
Disc changed

9:50:52 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:50:52 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:50:52 PM #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

9:50:53 PM #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

9:50:53 PM #34 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 4x (5,520 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 27/07/2003 5:38:52 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

#3

1: From the log it seems like the drive thinks it have a Taiyo Yuden DVD-R disc:

Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R
Disc Manufacturer: TYG01 -
Disc Application Code: 64, Disc Physical Code: 193

Maybe you had a TY disc in the drive and changed it for a Ritek G04 without the drive registering the change?

2: It seems like you have a nvidia chipset on your mainboard. Nvidia chipset/drivers is known to cause problems with optical drives. I suggest that you use the MS IDE drivers included in the operating system or tries the newest official from nvidia (do not use beta or drivers from other vendors, such as your mainboard maker).

3: Enable DMA.

#4

  1. Yeah sorry, the log was for the TDK that had the same error as the Ritek.

  2. Will try the latest drivers

  3. Can’t seem to enable DMA as you can see in the pic there is no advanced under IDE ATA/APAPI controllers in control panel.

I shall keep working on it.

#5

Whoops. Pictures won’t insert.

#6

1: okay

2: okay

3: Most likely due to the nvidia IDE drivers (which sucks).

#7

Installed MS IDE drivers and all is good now. Thanks.