LG H55N burning DVD problem

daryoush · 2008-04-28 12:00:24 UTC

hi i am a newbie so sorry if my question sounds stupid i just bought a lg h55n dvdrw but i have a problem this drive doesn’t burn under dma i mean when i turn dma mode on nero hangs on 1% and nothing happens but when i turn pio on it works but very slow @8X it takes about 35 min to burn a verbatim dvd.i am so sick and tired and have no clue to what to do i forgot to say that i went to warranty and changed this drive 3 times but all 3 of them have the same problem so if anyone can help i’ll appriciate it sorry if this is not the place to ask this kinda question.
athlon xp 1700+
giga 7vaxp
512 mb ddr
geforce 6200
i tried burning with imageburn but no success i tried burning cds actually it was ok and successful tried maxell dvd-r lg dvd-r verbatim dvd-r no success
and also when i abort burning proccess burner starts to burn and then aborts burning so result media will be corrupted i already asked this question in h55 section and no answer was provided doea anyone know anything about it please tell if you know something that may help i will appreciate it.

DARYOUSH FATEH
FATEH COMPANY
1K22-0867-0795-66M4-5827-1019-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4

Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.05 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <SCSI DVD-ROM >Version: 1.0 - HA 1 TA 1 - 8.1.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 2 ID 0 DMA: On
CdRomPeripheral : OS2273Z VEF724L 2.0B ajkbhxr1 Port 4 ID 0 DMA: Off
CdRomPeripheral : OS2273Z VEF724L 2.0B ajkbhxr1 Port 4 ID 1 DMA: Off
CdRomPeripheral : VQ3545C TUK904F 1.0 a7d6ys28 Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N E: CdRom0
SCSI DVD-ROM F: CdRom1
SCSI DVD-ROM O: CdRom2
OS2273Z VEF724L H: CdRom3
OS2273Z VEF724L N: CdRom4
VQ3545C TUK904F I: CdRom5

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 223MB (229044kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.4.2008
UDF compilation
11:11:07 Ø¨.Ø¸ #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:11:07 Ø¨.Ø¸ #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

11:11:08 Ø¨.Ø¸ #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

11:11:08 Ø¨.Ø¸ #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator ‘CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to ‘physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

11:11:08 Ø¨.Ø¸ #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator ‘CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to ‘physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

11:11:54 Ø¨.Ø¸ #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator ‘CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to ‘physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

11:11:56 Ø¨.Ø¸ #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2269503 (504:20.03, 4432MB)

11:11:56 Ø¨.Ø¸ #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

11:11:56 Ø¨.Ø¸ #9 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

11:11:56 Ø¨.Ø¸ #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)
Data to be written: 4,432 MB (4,647,944,192 bytes)
Space available on the disc: 70 MB (73,433,088 bytes)

11:11:56 Ø¨.Ø¸ #11 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2269504 (2269504) = #2269504/504:20.4
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2269504 blocks [E: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------

11:12:09 Ø¨.Ø¸ #12 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [E: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4647944192, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2269504 | 0 | 0x00
2269504 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:12:09 Ø¨.Ø¸ #13 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:12:09 Ø¨.Ø¸ #14 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

11:12:09 Ø¨.Ø¸ #15 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

11:12:09 Ø¨.Ø¸ #16 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

11:12:09 Ø¨.Ø¸ #17 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

11:12:09 Ø¨.Ø¸ #18 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5,540 KB/s)

11:12:09 Ø¨.Ø¸ #19 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:12:09 Ø¨.Ø¸ #20 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode for Multisession

11:12:09 Ø¨.Ø¸ #21 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: Yes

11:12:09 Ø¨.Ø¸ #22 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x00000000: Len x648

11:12:09 Ø¨.Ø¸ #23 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 ....0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R......... 03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20... 05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x.. 07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................ 09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x.......... 0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2. 0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/).. 0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............ 11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/).. 13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............ 15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$). 17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 ../…
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 …WFB’$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

11:12:09 Ø¨.Ø¸ #24 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 74390400

11:15:42 Ø¨.Ø¸ #25 Phase 40 File dlgbrnst.cpp, Line 1437
Aborted by user

11:15:58 Ø¨.Ø¸ #26 Phase 133 File dlgbrnst.cpp, Line 1764
Writing short lead-out

11:30:40 Ø¨.Ø¸ #27 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was 223 (DFh)Close track 1, ret: 0
Close Session/Border, function 2, track: 3, finalize disc: NO, ret: 0

11:30:40 Ø¨.Ø¸ #28 Phase 39 File dlgbrnst.cpp, Line 1764
Burn process aborted

11:30:40 Ø¨.Ø¸ #29 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:30:47 Ø¨.Ø¸ #30 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

11:30:47 Ø¨.Ø¸ #31 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

chef · 2008-04-28 13:16:27 UTC

disable:

Multisession type: : Start multisession
Burning mode : DAO

and use better media.

daryoush · 2008-04-28 20:18:00 UTC

excuse me what should i disable you mean try to burn without multisession? please enlighten me.

chef · 2008-04-29 01:33:06 UTC

Yes, try that.

daryoush · 2008-04-29 20:14:31 UTC

Tried that but it didn’t work i am so frustrated and do’t know exactly what to do please if anybody knows something please share.

DLW · 2008-04-30 04:17:35 UTC

Unfortunately I’m not familiar with this particular problem, so I would approach it logically and by the process of elimination. You’ve already eliminated the drive as a problem with 3 drive swaps all doing the same thing.

So … something is wrong with the computer configuration. My H55L really only likes UDMA 4 to operate at its best speeds. Its alone on the secondary IDE Master.

You turn off DMA and you get the standard snail write speed. You turn it on and it hangs the Write process. Logically that indicates there is something wrong with addressing that Port in DMA.

CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: [B]Off[/B]
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 1 DMA: [B]Off[/B]
DiskPeripheral : Maxtor 6Y080L0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 2 ID 0 DMA: On
CdRomPeripheral : OS2273Z VEF724L 2.0B ajkbhxr1 Port 4 ID 0 DMA: [B]Off[/B]
CdRomPeripheral : OS2273Z VEF724L 2.0B ajkbhxr1 Port 4 ID 1 DMA: [B]Off[/B]
CdRomPeripheral : VQ3545C TUK904F 1.0 a7d6ys28 Port 5 ID 0 DMA: [B]Off[/B]

You have a lot of ports and devices with DMA off here. Its not impossible for a PC to get confused with certain types of chipsets and configurations, they are far from fool proof.

In the interest of the process of elimination, I would unplug all devices except the Hard drive on one port DMA on, and the H55N on another port DMA on, one on ID 0 and the H55 on ID 1 so that the computer can only see two devices both in DMA. Then try writing a Blank DVD.

How did you get this :??

Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)
Data to be written: 4,432 MB (4,647,944,192 bytes)
Space available on the disc: 70 MB (73,433,088 bytes)

Are you trying to Multi-session a -R. You can’t do that; only +R/RW or DVD-RAM. I don’t like the look of this either:

11:12:09 Ø¨.Ø¸ #22 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

I don’t know the details about this Sense Key so its just an observation.

daryoush · 2008-04-30 07:59:37 UTC

hi thanks for repling
the devices you metioned were actually virtual devices i uninstalled them then tried to burn a dvd-r with image burn no success below is the log:

I 19:10:49 ImgBurn Version 2.4.1.0 started!
I 19:10:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 19:10:49 Total Physical Memory: 523,760 KB - Available: 222,952 KB
I 19:10:49 Initialising SPTI…
I 19:10:49 Searching for SCSI / ATAPI devices…
I 19:10:49 Found 1 DVDÂ±RW/RAM!
I 19:12:29 Operation Started!
I 19:12:29 Building Image Tree…
I 19:12:29 Checking Directory Depth…
I 19:12:29 Calculating Totals…
I 19:12:29 Preparing Image…
I 19:12:29 Checking Path Length…
I 19:12:29 Contents: 5 Files, 0 Folders
I 19:12:29 Size: 4,173,558,522 bytes
I 19:12:29 Sectors: 2,037,873
I 19:12:29 Image Size: 4,174,118,912 bytes
I 19:12:29 Image Sectors: 2,038,144
I 19:12:29 Operation Successfully Completed! - Duration: 00:00:00
I 19:13:05 Operation Started!
I 19:13:05 Building Image Tree…
I 19:13:06 Checking Directory Depth…
I 19:13:06 Calculating Totals…
I 19:13:06 Preparing Image…
I 19:13:06 Checking Path Length…
I 19:13:06 Contents: 5 Files, 0 Folders
I 19:13:06 Size: 4,173,558,522 bytes
I 19:13:06 Sectors: 2,037,873
I 19:13:06 Image Size: 4,174,118,912 bytes
I 19:13:06 Image Sectors: 2,038,144
I 19:13:07 Operation Successfully Completed! - Duration: 00:00:02
I 19:13:07 Operation Started!
I 19:13:07 Source File: -==//[BUILD IMAGE]/==-
I 19:13:07 Source File Sectors: 2,038,144 (MODE1/2048)
I 19:13:07 Source File Size: 4,174,118,912 bytes
I 19:13:07 Source File Volume Identifier: UNDEFINED
I 19:13:07 Source File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER!
I 19:13:07 Source File Implementation Identifier: ImgBurn
I 19:13:07 Source File File System(s): ISO9660; UDF (1.02)
I 19:13:07 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.05 (E:) (ATA)
I 19:13:07 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x; 8x; 12x; 16x; 18x; 20x)
I 19:13:07 Destination Media Sectors: 2,297,888
I 19:13:07 Write Mode: DVD
I 19:13:07 Write Type: DAO
I 19:13:07 Write Speed: 8x
I 19:13:07 Link Size: Auto
I 19:13:07 Test Mode: No
I 19:13:07 OPC: No
I 19:13:07 BURN-Proof: Enabled
I 19:13:08 Filling Buffer… (20 MB)
I 19:13:09 Writing LeadIn…
I 19:17:41 Abort Request Acknowledged
I 19:18:04 Synchronising Cache…
W 19:21:58 User opted to skip the ‘Close Track/Session/Disc’ functions.
E 19:21:58 Failed to Write Image!
E 19:21:58 Operation Failed! - Duration: 00:08:50
I 19:21:58 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

i had to abort cause nothing was happening any idea?

daryoush · 2008-04-30 08:14:37 UTC

hi again did the same with nero no success below is the log file

DARYOUSH FATEH
FATEH COMPANY
1K22-0867-0795-66M4-5827-1019-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4

Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.05 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.05 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N E: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 76MB (78492kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.4.2008
UDF/ISO compilation
07:34:07 Ø¨.Ø¸ #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

07:34:08 Ø¨.Ø¸ #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

07:34:08 Ø¨.Ø¸ #3 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)

07:34:08 Ø¨.Ø¸ #4 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)

07:34:08 Ø¨.Ø¸ #5 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

07:34:08 Ø¨.Ø¸ #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to 'physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

07:34:09 Ø¨.Ø¸ #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2144383 (476:31.58, 4188MB)

07:34:09 Ø¨.Ø¸ #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

07:34:09 Ø¨.Ø¸ #9 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

07:34:09 Ø¨.Ø¸ #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

07:34:09 Ø¨.Ø¸ #11 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2144384 (2144384) = #2144384/476:31.59
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2144384 blocks [E: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------

07:34:09 Ø¨.Ø¸ #12 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [E: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4391698432, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2144384 | 0 | 0x00
2144384 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

07:34:09 Ø¨.Ø¸ #13 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

07:34:09 Ø¨.Ø¸ #14 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

07:34:09 Ø¨.Ø¸ #15 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

07:34:09 Ø¨.Ø¸ #16 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

07:34:09 Ø¨.Ø¸ #17 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

07:34:09 Ø¨.Ø¸ #18 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 8x (11,080 KB/s)

07:34:09 Ø¨.Ø¸ #19 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

07:34:09 Ø¨.Ø¸ #20 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode

07:34:09 Ø¨.Ø¸ #21 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: Yes

07:34:09 Ø¨.Ø¸ #22 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x00000000: Len x648

07:34:09 Ø¨.Ø¸ #23 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 ....0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R......... 03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20... 05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x.. 07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................ 09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x.......... 0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2. 0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/).. 0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............ 11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/).. 13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............ 15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$). 17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 ../…
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 …WFB’$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

07:34:09 Ø¨.Ø¸ #24 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 74390400

07:38:28 Ø¨.Ø¸ #25 Phase 40 File dlgbrnst.cpp, Line 1437
Aborted by user

07:41:51 Ø¨.Ø¸ #26 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was 255 (FFh)

07:41:52 Ø¨.Ø¸ #27 Phase 39 File dlgbrnst.cpp, Line 1764
Burn process aborted

07:41:52 Ø¨.Ø¸ #28 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

07:41:59 Ø¨.Ø¸ #29 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

07:41:59 Ø¨.Ø¸ #30 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

DLW · 2008-04-30 10:50:42 UTC

Yes, it still can’t access that port in DMA. This is extremely important!

You still have both drives on [U]ID 0 .[/U] In several occasions I’ve seen that they must be on different ID channels. Put the Master Hard drive on ID 0, put the H55 on Master ID 1. And it never hurts to make sure you are using 80 cable flat connector cables.

Another thing I don’t like is :

MCN: ""
TOCType: 0x00; Session Closed, disc fixated

Are you using a blank disc?

Try using [B][U]simulate mode[/U][/B] with the Nero CD-Speed test tool and a blank disk. This way it won’t blow the disk but should give you an indication of the burn process and how it will work. You’ll use the ceate data disk function.

How long did you wait before you aborted ?? Was anything showing on the H55 drive light ??

I 19:17:41 Abort Request Acknowledged
I 19:18:04 Synchronising Cache…
W 19:21:58 User opted to skip the ‘Close Track/Session/Disc’ functions.
E 19:21:58 Failed to Write Image!
E 19:21:58 Operation Failed! - Duration: 00:08:50
I 19:21:58 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

To find the solution to a problem like this can be very tricky because it requires shifting things around and experimenting. No optical Drive is a universal success when installed.

dontasciime · 2008-04-30 11:18:48 UTC

Uninstall the IDE controller (storage controller) from device manager under IDE/ATAPI and have windows pick it up again straight after or on a reboot.

First though check you bios and make sure UDMA is set to AUTO for PRIMARY and SECONDARY and any other places it shows up

daryoush · 2008-04-30 11:50:49 UTC

@DLW my mainboard has two IDE chips 4 connectors 1 chip is ATA 100 and the other one is a PROMISE chip for raid and etc when i put h55n on the promise chip nero gives an error and exits before even starting up so i can’t put them on different chips and my h55n led flashes when in lead in procces about 30 seconds then led turns off and nothing happens my dvd-r is verbatim and yes they are empty and my h55n is connected to a 80 pin cable and i aborted the burning procces after 4 minutes when nothing happened.

DLW · 2008-04-30 12:21:02 UTC

OK on the LED, that is a stall or failure of some kind. I’ve had it do something like that when trying to read a DVD-Video (but thats another story) . I’ve never used Athlon boards so I’m not too familiar with their IDE interfaces. You have two (Nice for Raid), I have only one with two channels on this Intel chipset. If you have an AtA100 IDE chip you should have two channels on it. Usually Identified as IDE-0 and IDE-1 (Primary and Secondary). This is where your H55 must be, not on the other chip. In most configs the Hard-drive is on IDE-0 Master, thinking in terms of Intel boards. Optical drives are then put on IDE-1 Master.

Do you have two channels on the ATA100 chip ?? (assuming 1 & 2 of four total)

Now this is disregarding the Raid Promise chip.

AS dontasciime mentioned, does your Bios give options for UDMA on some or all of your IDE channels ??

daryoush · 2008-04-30 12:33:53 UTC

@DLW yes my mobo has two channels on ata 100 chip and my HDD is on the IDE0 and h55n is on the IDE1 and my BIOS has only 1 setting for IDE channels whis has 3 options no.1 ata 33(40pin cable) no.2 ata66,100,133 (80 pin cable) no.3 auto

DLW · 2008-04-30 13:05:04 UTC

And the cable is what ? 40 or 80. And the Bios setting is what? Set it for the [U]actual cable size[/U]. (You can count the wires to be sure)

40 won’t get you there; not all the way.

After that is set, follow what dontasciime said above; Uninstall the IDE controller (storage controller) from device manager under IDE/ATAPI and have windows pick it up again straight after or on a [U]reboot[/U]. It will automatically reload and configure the Controller Via PnP protocols.

daryoush · 2008-04-30 20:28:55 UTC

@DLW hi sorry for delay it was 1 am and i had to go to sleep.
my cable is 80 pin i tried option no.2 and no.3 they didn’t work and i uninstalled ide controllers but still no success by the way i noticed something during boot proccess before winxp boots where it lists devices it says “secondary master pio mode 4” but in winxp device manager secondary master is “multiword dma 2” my h55n is on secondary master is it ok or not?

chef · 2008-05-01 01:46:08 UTC

[QUOTE=daryoush;2048449]@DLW hi sorry for delay it was 1 am and i had to go to sleep.
[B]my cable is 80 pin[/B] i tried option no.2 and no.3 they didn’t work and i uninstalled ide controllers but still no success by the way i noticed something during boot proccess before winxp boots where it lists devices it says “secondary master pio mode 4” but in winxp device manager secondary master is “multiword dma 2” my h55n is on secondary master is it ok or not?[/QUOTE]

Sorry, only 80 wire is possible. Is it 80 wire?

daryoush · 2008-05-01 03:26:34 UTC

@chef yes it is 80 wire

DLW · 2008-05-01 12:49:40 UTC

If you have 80 wire flat cable on both IDE Channels (Sometimes there will be 80 wires on the Primary and 40 wires on the Secondary) If your sure its the secondary wire cable your looking at, and it is 80 flat and your set on the end as Master, then that would be the correct configuration.

My Bios boot configuration screen also shows the PIO modes for all drives and to the right it also shows the UDMA mode for all drives. So it reports PIO-4 for all Drives and UDMA-5 for the two Hard drives and UDMA-4 for the H55L on the Secondary channel. With my Mobo which uses 845PE Intel Chipset, its operating with the Intel App Accelerator, and that application installed in Windows, runs during the low level boot process. Otherwise Windows will set and control the DMA mode which is not the case on my computer. So it would seem Windows set your DMA-2 on the OS boot which seems normal to me.

So at this point I’m perplexed as to why you can’t write in DMA mode on the Secondary Master. Does anything Read and Write in DMA on the Secondary Master !? OK so its starting to make me wonder if there is a compatability problem with the H55 Panasonic chipset and firmware and the DMA in your chipset. 3 Drives all doing the same thing !!

Do you have any other Brand DVD writer you can test in place of the H55 ??
If not, plug the Hard drive in the secondary master and see if it will boot and run normal speed. Leave the H55 unplugged.

I assume you have the Hard drive on the primary master and the H55 on the secondary master and when you try to burn in DMA, it just hangs the write; am I correct ?? And I assume the Device Manager shows DMA-2 for both; correct ??
Are you using the Nero CDSpeed create data in simulate mode; or does this corrupt a new blank disk every time you try it. Do you have any +R/RW disks and/or DVD-RAM disks ??

One other thing. Can you disable the Raid Promise chip in Bios or Device manager ?? This way running only the ATA100 IDE.

daryoush · 2008-05-01 13:08:49 UTC

@DLW today i brought a nec dvd writer 3520(i am not sure about the model number) from my office and took my h55n to my office i mean i swapped them nec drive from office worked although slow on my home pc and h55n worked on my office pc then i came home i formatted my hard drive and reinstalled winxp and disabled the raid(promise chip) but my h55n didn’t work tonight i am going to do what you said (chinging hdd to ide1 and h55n to ide0 )to see what happens and i will report it tommorow i am not using nero to simulate the burn procces this are real burns with blank dvd-rs and about my device manager it shows “multiword dma mode 2” is it equal to DMA2 or not?and durnig boot procces it shows pio4 and finally i have a dvdrw and i am going to test it tomorrowand report back to you and about 80 wire i think the cables are 80 wire cause i have an old 40wire cable and these cables that i am using now have more wires so i assume they are 80 wire correct?and by the way thank for your replies.

DLW · 2008-05-01 17:07:39 UTC

DMA is all multiword now, they don’t use single word anymore. DMA1 is about 13.3 MBs and DMA2 is 16.7 MBs. But this is still a far cry from UDMA. The H55 is an Ultra ATA drive and will run nicely at UDMA 4 which is 66.7 MBs. [B]Some Ultra ATA Drives, both Hard and Optical don’t like older boards and some chipsets and will automatically gear down to PIO-4 or lock up or send error messages.[/B] If you have any UDMA settings in Bios make sure they’re turned on. Sometimes a Bios upgrade needs to done to enable or make the board compatible with UDMA Drives. I don’t know anything about your Mobo but you should be using UDMA with the H55. If you have a “Bus Mastering” switch in Bios setup check its status and turn it on; If its on then try turning it off. Check your Mobo manual and find out if it will run in UDMA; it would specify something like “2/4 channel Ultra ATA/100 Bus Master IDE controller” . The boot bios config screen should show the UDMA mode for all drives if its capable of running UDMA. You would need to have a Controller capable of UDMA on the Mobo, if not, you’d have to use IDE/ATA interface card. UDMA has to be set in either the Bios or the OS. You should be able to confirm that UDMA is on for any channel. Unless your running an older board we should be talking UDMA not DMA 1 or 2.

What I’m wondering is if the H55 doesn’t like the DMA2 on your chipset. DMA2 should give you reasonable performance over PIO which takes you 35 minutes to burn a disc but there could still be a problem even if DMA is available on the IDE channel. DMA2 has about the same Transfer rate PIO-4 but PIO causes a lot of CPU overhead which can slow things down a lot.

I think its a good idea to use RW discs. Just get a good quality one (fastest speed) for all this testing. If you get a DVD RW up to its max speed then its likely you solved the problem.

The 40 and 80 do look different. You get up close and you can get a rough count using a fingernail. The thing here is, again, UDMA will automatically drop to UDMA 2 if your on a 40 cable. Bios will do it. DMA 1 or 2 is not fast enough to require the extra ground lead between the 40 data wires. I’ve run the H55 on a 40 cable but I could not get better than UDMA 2.

LG H55N burning DVD problem

=== CDRom-Device-Map === HL-DT-ST DVD-RAM GSA-H55N E: CdRom0 SCSI DVD-ROM F: CdRom1 SCSI DVD-ROM O: CdRom2 OS2273Z VEF724L H: CdRom3 OS2273Z VEF724L N: CdRom4 VQ3545C TUK904F I: CdRom5

=== CDRom-Device-Map === HL-DT-ST DVD-RAM GSA-H55N E: CdRom0

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N E: CdRom0
SCSI DVD-ROM F: CdRom1
SCSI DVD-ROM O: CdRom2
OS2273Z VEF724L H: CdRom3
OS2273Z VEF724L N: CdRom4
VQ3545C TUK904F I: CdRom5

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N E: CdRom0