LG H42N Crossflashed to H44N

vbimport

#1

I 19:36:08 ImgBurn Version 2.3.0.0 started!
I 19:36:08 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 19:36:08 Total Physical Memory: 2,096,364 KB - Available: 1,506,680 KB
W 19:36:08 AnyDVD can interfere with ImgBurn’s ability to verify accurately, please ensure it’s disabled!
I 19:36:08 Initialising SPTI…
I 19:36:08 Searching for SCSI / ATAPI devices…
I 19:36:09 Found 4 DVD±RWs and 2 DVD±RW/RAMs!
I 19:37:01 Operation Started!
I 19:37:01 Source File: D:\THE_DEPARTED.ISO
I 19:37:01 Source File Sectors: 2,285,850 (MODE1/2048)
I 19:37:01 Source File Size: 4,681,420,800 bytes
I 19:37:01 Source File Volume Identifier: THE_DEPARTED
I 19:37:01 Source File Implementation Identifier: DVD Shrink
I 19:37:01 Source File File System(s): ISO9660, UDF (1.02)
I 19:37:01 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-H44N RB01 (F:) (ATA)
I 19:37:01 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 8x, 12x, 16x, 18x)
I 19:37:01 Destination Media Sectors: 2,295,104
I 19:37:01 Write Mode: DVD
I 19:37:01 Write Type: DAO
I 19:37:01 Write Speed: MAX
I 19:37:01 Link Size: Auto
I 19:37:01 Test Mode: No
I 19:37:01 BURN-Proof: Enabled
I 19:37:01 Filling Buffer… (40 MB)
I 19:37:02 Writing LeadIn…
I 19:37:28 Writing Image… (LBA: 0 - 2285849)
I 19:41:50 Synchronising Cache…
I 19:41:51 Closing Track…
I 19:41:53 Finalising Disc…
I 19:42:10 Image MD5: c581b2bea8053e05dee1e19a2b4b1bf1
I 19:42:16 Operation Successfully Completed! - Duration: 00:05:08
I 19:42:16 Average Write Rate: 17,449 KB/s (12.6x) - Maximum Write Rate: 25,432 KB/s (18.4x)


#2

Very nice Alan! :clap: I did the same thing too. :bigsmile:


#3

Its burns about the same as the H42N , I can’t really see much of a difference.:wink:


#4

Alan you might want to post the flash process.


#5

Alan does this fix CD burning problems?


#6

The 44 seems a little obscure, at least in my language. What does it offer that the 42 does not?


#7

Like i asked hopefully it will fix the CD burning problem.


#8

It’s the same process as the one you did for crossflashing your H42N to the Buffalo DVSM-XH1218 drive (RJ11). This time use RB01 instead.
I also noticed there were two drives to choose (H42N and H42L) from the drop down crossflash box of MCSE. Of course, I selected the H42N since my drive was the H42N. After a reboot, the drive was recognized as the H44N by Windows.


#9

Hey hey now the flash back to H42N is fixed in MCSE