Lg GSA-H55N problem: cannot write cd

[qanda]This question is published in the hardware section for the LG GSA-H55N. Click here to view full specs.[/qanda]I tried different CD media, different computers and the result is the same. Nero stops at 6, 7, 9 … % and cannot write nothing. I tried Ashampoo, NTI CD; Power to go… with the same effect - no burn CD!
Also I updated to firmware 1.06
Cleaned the lens…
What else can I do… I am helpless!
Here is my last error log from Nero:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.06 - HA 1 TA 3 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <QRENIN 0LUZ89URS9 >Version: 1.03 - HA 1 TA 1 - 7.7.5.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3500320AS atapi Port 5 ID 0 DMA: On
CdRomPeripheral : QRENIN 0LUZ89URS9 1.03 ac1e8i5o Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N G: CDRom3
QRENIN 0LUZ89URS9 I: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 15 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.2.2009
CD-ROM (ISO)
12:22:52 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:22:52 #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:22:52 #3 Text 0 File Burncd.cpp, Line 3163
HL-DT-ST DVD-RAM GSA-H55N
Buffer underrun protection activated

12:22:52 #4 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

12:22:52 #5 Text 0 File Burncd.cpp, Line 3465
Turn on Track-At-Once, using CD-R/RW media

12:22:53 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 338699 ( 75:17.74)

12:22:53 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

12:22:53 #8 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: HL-DT-ST DVD-RAM GSA-H55N;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

12:22:53 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:22:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 338700 (338700) = #338700/75:16.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 338698 blocks [G: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------

12:22:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [G: HL-DT-ST DVD-RAM GSA-H55N] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 693964800, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 338700 | -150 | 0x00
0 | 1 | 1 | 0x41 | 338700 | 0 | 0x00
338700 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:22:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1097
Removed 2 run-out blocks from end of track 1. Length: 338700 -> 338698.

12:22:53 #13 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:22:53 #14 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

12:22:53 #15 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

12:22:53 #16 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

12:22:53 #17 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 16x (2Â 400 KB/s)

12:22:53 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:22:53 #19 Text 0 File MMC.cpp, Line 22250
Set BUFE: Buffer underrun protection -> ON

12:24:06 #20 SPTI -1119 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
Buffer x09bc0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:24:06 #21 CDR -1119 File Writer.cpp, Line 301
Track following error
G: HL-DT-ST DVD-RAM GSA-H55N

12:24:06 #22 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
G: HL-DT-ST DVD-RAM GSA-H55N

12:24:06 #23 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack

12:24:06 #24 Text 0 File MMC.cpp, Line 17028
<䱈䐭ⵔ呓䐀䑖刭䵁噄ⵄ䅒⁍升ⵁ㕈丵㄀〮6Ā> start Close Session

12:24:06 #25 SPTI -1026 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1026)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 2C 04

12:24:06 #26 CDR -1026 File WriterStatus.cpp, Line 245
Current program area empty
G: HL-DT-ST DVD-RAM GSA-H55N

12:24:06 #27 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

12:24:06 #28 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

12:24:07 #29 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 16x (2Â 400 KB/s)

12:24:07 #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:24:17 #31 SPTI -1 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0xB6
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 B6

12:24:18 #32 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

12:24:18 #33 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)