LG GSA-4167B Problems

I have 2 problems with my new 4167B writer. Firstly, I have tried to update the firmware to DL11 and DL12 (currently DL10). What ever I do it always fails. Error message code is just a bunch of 0’s) any help appreciated.

Secondly, I have tried to burn a DVD-Video disc (dvd-r) and it fails (error log below) with Nero 7

Any help welcomed

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder:             <HL-DT-ST DVDRAM GSA-4167B>Version: DL10 - HA 1 TA 1 - 7.0.1.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <DVD-16X  OEM316B         >Version: 1.00 - HA 1 TA 0 - 7.0.1.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST380021A               3.19    siside Port 0 ID 0  DMA: Off
CdRomPeripheral      : DVD-16X OEM316B         1.00    siside Port 0 ID 1  DMA: Off
CdRomPeripheral      : HL-DT-STDVDRAM GSA-4167BDL10    siside Port 1 ID 0  DMA: Off
CdRomPeripheral      : CyberDrvCW078D CD-R/RW  130E    siside Port 1 ID 1  DMA: Off
CdRomPeripheral      : AXV     CD/DVD-ROM      2.2a    axsaki Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
DVD-16X OEM316B            E:   CDRom0
HL-DT-ST DVDRAM GSA-4167B  F:   CDRom1
CyberDrv CW078D CD-R/RW    G:   CDRom2
AXV CD/DVD-ROM             H:   CDRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523760kB)
Free physical memory: 117MB (120244kB)
Memory in use       : 77 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

5.11.2005
UDF/ISO compilation
15:09:03	#1 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#2 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#3 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#4 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#5 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#6 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#7 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#8 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#9 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#10 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#11 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#12 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#13 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#14 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#15 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#16 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#17 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#18 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#19 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#20 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#21 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#22 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#23 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#24 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#25 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:03	#26 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:05	#27 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:07	#28 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:09	#29 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:11	#30 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:13	#31 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:15	#32 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:17	#33 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:19	#34 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:21	#35 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:23	#36 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:25	#37 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:27	#38 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:29	#39 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:31	#40 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:33	#41 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:35	#42 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:37	#43 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:39	#44 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:41	#45 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:43	#46 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e84e00: Len x804
	
15:09:45	#47 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e85000: Len x804
	
15:09:47	#48 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:49	#49 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:51	#50 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a000: Len x804
	
15:09:53	#51 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x03e8a400: Len x804
	
15:09:55	#52 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x048f4200: Len x804
	
15:09:57	#53 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x048f4200: Len x804
	
15:09:59	#54 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04903200: Len x804
	
15:10:00	#55 Phase 112 File dlgbrnst.cpp, Line 1725
	DVD-Video files reallocation started
	
15:10:00	#56 DVDREALLOC -22 File DVDVideoCompilation.cpp, Line 1211
	File 'VIDEO_TS.VOB' is not referenced and should not be present
	
15:10:00	#57 Phase 115 File dlgbrnst.cpp, Line 1725
	DVD-Video files reallocation failed
	
15:10:01	#58 Phase 132 File dlgbrnst.cpp, Line 1725
	DVD-Video files compliance ignored
	
15:10:02	#59 Text 0 File Isodoc.cpp, Line 6411
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : UDF/ISO bridge
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  :FALSE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
15:10:02	#60 Phase 111 File dlgbrnst.cpp, Line 1725
	DVD-Video files sorted
	
15:10:02	#61 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 72704KB of Memory
	
15:10:02	#62 Text 0 File Reader.cpp, Line 124
	Reader running
	
15:10:02	#63 Text 0 File Writer.cpp, Line 113
	Writer F: HL-DT-ST DVDRAM GSA-4167B running
	
15:10:02	#64 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x049a2800: Len x804
	
15:10:02	#65 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x049a2800: Len x804
	
15:10:02	#66 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x049a2800: Len x804
	
15:10:02	#67 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
15:10:03	#68 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
15:10:03	#69 Text 0 File Burncd.cpp, Line 3302
	Turn on Disc-At-Once, using DVD media
	
15:10:03	#70 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#71 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#72 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#73 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#74 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#75 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#76 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#77 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#78 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:03	#79 SPTI -1080 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A 
	Buffer x04a2f000: Len x804
	
15:10:42	#80 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2277679 (506:09.04, 4448MB)
	
15:10:42	#81 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
15:10:42	#82 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R
	 Disc Manufacturer: CMC MA - G. AE1
	 Disc Application Code: 64, Disc Physical Code: 193
	
15:10:42	#83 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)
	
15:10:42	#84 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2277680 (2277680) = #2277680/506:9.5
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2277680 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
	--------------------------------------------------------------
	
15:10:42	#85 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [F: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4664688640, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2277680 | lead-out |   1 |    0x41 | 0x00
	
15:10:42	#86 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
15:10:42	#87 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
15:10:42	#88 Text 0 File Burncd.cpp, Line 4132
	Cache writing successful.
	
15:10:42	#89 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
15:10:44	#90 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 4x (5,540 KB/s)
	
15:10:44	#91 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
15:10:44	#92 Text 0 File DVDR.cpp, Line 2580
	Recording mode: Sequential Recording Mode
	
15:10:44	#93 Text 0 File MMC.cpp, Line 21611
	Set BUFE: Buffer underrun protection -> ON 
	
15:10:44	#94 Text 0 File DVDR.cpp, Line 2735
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
15:10:44	#95 Text 0 File Cdrdrv.cpp, Line 8411
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 2FE10 h
	  Start sector number of the next Border-In:     2FFA0 h
	 Media Specific [16..63]:
	      00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00    .0..............
	      00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
15:10:48	#96 SPTI -31 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x00) WinError(87) NeroError(-31)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0abb0000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
15:10:48	#97 SPTI -31 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x00) WinError(87) NeroError(-31)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0b29ce00: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
15:10:48	#98 Text 0 File MMC.cpp, Line 19278
	Writer-Buffer for F: HL-DT-ST DVDRAM GSA-4167B reduced to 32768Bytes
	
15:10:56	#99 Text 0 File Cdrdrv.cpp, Line 1197
	15:10:56.281 - F: HL-DT-ST DVDRAM GSA-4167B : Queue again later
	
15:11:16	#100 SPTI -31 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x00) WinError(87) NeroError(-31)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 80 00 00 10 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x04a3f200: Len x8000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
15:11:16	#101 CDR -31 File Writer.cpp, Line 302
	Buffer too large
	F: HL-DT-ST DVDRAM GSA-4167B
	
15:11:16	#102 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
15:11:16	#103 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
15:11:17	#104 Text 0 File DVDR.cpp, Line 2978
	EndDAO: Last written address was 127
	
15:11:59	#105 Phase 38 File dlgbrnst.cpp, Line 1725
	Burn process failed at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/05/2004 14:23:12 
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/05/2004 14:23:12 
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 28/08/2004 07:56:49 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

Thanks

Welcome :slight_smile:
Check the DMA settings of your source and target drive.
In case you are using a NVidia IDE driver, remove it and use the stock Microsoft driver instead.

Thanks.

I updated my SIS IDE drivers but have yet to check an actual burn.

I also managed to get the firmware update done by starting in Safe Mode (after the above update).

I will try and burn a DVD-Video disc next and see what happens. I was also getting some Nero message about buffer being too large, what is all that about?

Check the result of the Nero CD-DVD Speed burst transfer test, you need a disk with some data in the drive to run the test. It should display at least 23 MB/sec.
Removing the SIS IDE drives might be a good idea if you still have problems.

Speed test results = 26MB/sec. I am still getting some strange results. I’ve installed Force 1.7 ASPI (not sure it has helped).

It seems I can burn a normal CDR (audio mode) and a DVD-R (data mode), but when I try a DVD-Video now I get this.

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder:             <HL-DT-ST DVDRAM GSA-4167B>Version: DL12 - HA 1 TA 1 - 7.0.1.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <DVD-16X  OEM316B         >Version: 1.00 - HA 1 TA 0 - 7.0.1.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST380021A                        atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : DVD-16X OEM316B                  atapi Port 0 ID 1  DMA: On 
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4167B        atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : CyberDrv CW078D CD-R/RW          atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : AXV     CD/DVD-ROM      2.2a    axsaki Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
DVD-16X OEM316B            E:   CDRom0
HL-DT-ST DVDRAM GSA-4167B  F:   CDRom1
CyberDrv CW078D CD-R/RW    G:   CDRom2
AXV CD/DVD-ROM             H:   CDRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523760kB)
Free physical memory: 107MB (109740kB)
Memory in use       : 79 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

5.11.2005
UDF/ISO compilation
23:20:40	#1 Phase 112 File dlgbrnst.cpp, Line 1725
	DVD-Video files reallocation started
	
23:20:40	#2 DVDREALLOC -22 File DVDVideoCompilation.cpp, Line 1211
	File 'VIDEO_TS.VOB' is not referenced and should not be present
	
23:20:40	#3 Phase 115 File dlgbrnst.cpp, Line 1725
	DVD-Video files reallocation failed
	
23:20:45	#4 Phase 132 File dlgbrnst.cpp, Line 1725
	DVD-Video files compliance ignored
	
23:20:45	#5 Text 0 File Isodoc.cpp, Line 6411
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : UDF/ISO bridge
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  :FALSE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
23:20:45	#6 Phase 111 File dlgbrnst.cpp, Line 1725
	DVD-Video files sorted
	
23:20:45	#7 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 72704KB of Memory
	
23:20:45	#8 Text 0 File Reader.cpp, Line 124
	Reader running
	
23:20:45	#9 Text 0 File Writer.cpp, Line 113
	Writer F: HL-DT-ST DVDRAM GSA-4167B running
	
23:20:45	#10 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
23:20:45	#11 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
23:20:45	#12 Text 0 File Burncd.cpp, Line 3302
	Turn on Disc-At-Once, using DVD media
	
23:20:45	#13 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2277679 (506:09.04, 4448MB)
	
23:20:45	#14 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
23:20:45	#15 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R
	 Disc Manufacturer: CMC MA - G. AE1
	 Disc Application Code: 64, Disc Physical Code: 193
	
23:20:45	#16 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
23:20:45	#17 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2277680 (2277680) = #2277680/506:9.5
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2277680 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
	--------------------------------------------------------------
	
23:20:45	#18 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [F: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4664688640, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2277680 | lead-out |   1 |    0x41 | 0x00
	
23:20:45	#19 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
23:20:45	#20 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
23:20:45	#21 Text 0 File Burncd.cpp, Line 4132
	Cache writing successful.
	
23:20:45	#22 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
23:20:46	#23 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 4x (5,540 KB/s)
	
23:20:46	#24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
23:20:46	#25 Text 0 File DVDR.cpp, Line 2580
	Recording mode: Sequential Recording Mode
	
23:20:46	#26 Text 0 File MMC.cpp, Line 21611
	Set BUFE: Buffer underrun protection -> ON 
	
23:20:46	#27 Text 0 File DVDR.cpp, Line 2735
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
23:20:46	#28 Text 0 File Cdrdrv.cpp, Line 8411
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 2FE10 h
	  Start sector number of the next Border-In:     2FFA0 h
	 Media Specific [16..63]:
	      00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00    .0..............
	      00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
23:21:44	#29 SPTI -1064 File SCSIPassThrough.cpp, Line 323
	F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x21
	Sense Qual: 0x02
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0C 21 02 
	Buffer x0ad40000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
23:21:44	#30 CDR -1064 File Writer.cpp, Line 302
	Invalid block address
	F: HL-DT-ST DVDRAM GSA-4167B
	
23:21:44	#31 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
23:21:44	#32 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
23:21:44	#33 Text 0 File DVDR.cpp, Line 2978
	EndDAO: Last written address was -1
	
23:21:46	#34 Phase 38 File dlgbrnst.cpp, Line 1725
	Burn process failed at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/05/2004 14:23:12 
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/05/2004 14:23:12 
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 28/08/2004 07:56:49 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any thoughts

Recorder: Version: DL12 - HA 1 TA 1
Bus Type : default (0) -> ATAPI, detected: ?

Physical memory : 511MB (523760kB)
Free physical memory: 107MB (109740kB)
Memory in use : 79 %

  • try to close down more programs prior to dvd work/burning to free up more memory

File ‘VIDEO_TS.VOB’ is not referenced and should not be present

DVD-Video files reallocation failed

DVD-Video files compliance ignored

  • you’ve done something wrong in the video preparation stage

Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2277679 (506:09.04, 4448MB)

  • 4448MB is a little too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink’s preferences thus avoiding outer edge and not sacrificing much space

Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

  • if none of the other suggestions work, try better media

Invalid block address

  • see previous comment

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=5.3.2.31, size=23420 bytes, created 12/05/2004 14:23:12

hi im requesting yr help ,i have a hl-dt-st dvdram gsa-4163b and for some reason im getting a recorder error half way through a write of a dvd its on all dvd files ive tried loads ,i have installed a few programs but dont think they would interfere with the drive , please help me if u can thank you for yr time ryan rdcaw1@hotmail.com

@turtle212, hi, if you use Nero i can help… …let’s have LAST section of your Nero log which lives in c:\program files\ahead
ero
erohistory.log but DO NOT post your serial number which usually begins with ‘1A21’ or similar. You can differentiate sections via this section divider “====== *** Nero-Burning Rom, History File *** ======”

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM 
Nero version: 6.3.1.26
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 297MB (304288kB)
Memory in use       : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

16.10.2005
===== Disc-Copy over image - 1st step : Copy to image  ...

12:28:06 AM	#1 Text 0 File Reader.cpp, Line 126
	Reader running
	
12:28:06 AM	#2 Text 0 File Writer.cpp, Line 124
	Writer  Image Recorder      running
	
12:28:06 AM	#3 Text 0 File DVDCopy.cpp, Line 271
	DVD Track-Information from source disc
	 S01 T01 Con 0x04 Start       0 Len 2295104 (gap       0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
	
12:28:06 AM	#4 Text 0 File DVDCopy.cpp, Line 374
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  2295104 =  2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
12:28:06 AM	#5 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
12:28:07 AM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
	Last address to be written:            2295103 (510:01.28, 4482MB)
	
12:28:07 AM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
12:28:07 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder:  Image Recorder;
	   CD type reading failed
	   ATIP Data: ?
	
12:28:07 AM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
12:28:07 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [ Image Recorder     ]
	--------------------------------------------------------------
	
12:28:07 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [ Image Recorder     ] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200    4700680192, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 2295104 | lead-out |   1 |   0x00 |  0x41
	
12:28:07 AM	#12 Phase 120 File dlgbrnst.cpp, Line 1855
	Creating the image for burning
	
12:28:07 AM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
12:39:54 AM	#14 Text 0 File WriterStatus.cpp, Line 115
	< Image Recorder     > start writing Lead-Out at LBA 2295104 (230540h), lenght 0 blocks
	
12:39:54 AM	#15 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
12:39:54 AM	#16 Phase 121 File dlgbrnst.cpp, Line 1855
	Creating Image completed successfully
	


===== Disc-Copy over image - 2nd step : Burn the image ...

12:40:12 AM	#1 Text 0 File Reader.cpp, Line 126
	Reader running
	
12:40:13 AM	#2 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
12:40:13 AM	#3 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x40
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 405712896
	CUES:
	   0: Ctrl=0x41 Trk=  0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 (     -150)
	   1: Ctrl=0x41 Trk=  1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 (     -150)
	   2: Ctrl=0x41 Trk=  1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 (        0)
	   3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=510:01.29 (  2295104)
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Documents and Settings\ryan\My Documents\TempImage.nrg>
	
12:40:14 AM	#4 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
12:41:14 AM	#5 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2295103 (510:01.28, 4482MB)
	
12:41:14 AM	#6 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
12:41:14 AM	#7 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
	 Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
	 Disc Application Code: 0, Extended Information Indicators: 1
	
12:41:14 AM	#8 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)
	This disc is not empty.
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)
	Accessing disc...
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)
	
12:41:14 AM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) provided
	    original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
12:41:14 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 2 to 2:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4700372992, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        2 |   0 |   0x00 |  0x41
	       0 |        2 |   1 |   0x00 |  0x41
	 2295104 | lead-out |   1 |   0x00 |  0x41
	
12:41:15 AM	#11 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 4x (5,540 KB/s)
	
12:41:15 AM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
12:41:15 AM	#13 Text 0 File Cdrdrv.cpp, Line 8228
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+RW  (9), Part Version: 2
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: re-writable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 1 h
	  Disc Manufacturer ID: INFODISC
	  Media type ID: A10
	  Product revision number: 1
	  Number of Physical format information bytes in use in ADIP up to byte 63: 57
	 Media Specific [16..63]:
	      00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39    ...INFODISCA10.9
	      23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B    #..|\.(..~p.(..{
	      68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00    h.(.............
	
12:41:15 AM	#14 Text 0 File DVDR.cpp, Line 4643
	Drive: HL-DT-ST DVDRAM GSA-4163B
	Book Type request: DVD-ROM
	Book Type setting not supported for the loaded disc type
	
12:41:15 AM	#15 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 14:20,913 (860913ms) -> OK
	
12:41:15 AM	#16 Text 0 File DVDPlusRW.cpp, Line 628
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
12:56:00 AM	#17 Text 0 File WriterStatus.cpp, Line 115
	<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2295104 (230540h), lenght 0 blocks
	
12:56:00 AM	#18 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
12:56:03 AM	#19 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
12:56:03 AM	#20 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
12:56:03 AM	#21 Phase 37 File dlgbrnst.cpp, Line 1855
	Burn process completed successfully at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 11:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM 
Nero version: 6.3.1.26 (Nero Express)
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 240MB (246468kB)
Memory in use       : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

25.10.2005
Super Video CD
4:09:23 PM	#1 Text 0 File VCDDoc.cpp, Line 1481
	VideoCD document burn settings
	------------------------------------------
	Compilation type           : SVCD
	Menu                       : Enable
	Picture in separate folder : TRUE
	Folder name                :PICTURES
	Use CD-I                   : TRUE
	CD-I configuration         : CONTROLS=ALL

 CURCOL=YELLOW

 PSDCURCOL=RED

 PSDCURSHAPE=ARROW

 CENTRTRACK=2

 AUTOPLAY=AUTO_ON

 DUALCHAN=DUAL_ON

 TIMECODE_X=64

 TIMECODE_Y=100

 LOTID_X=64

 LOTID_Y=64

 ALBUM=STANDARD
	Encoding bitrate mode      : User defined (kb/s)
	
4:09:23 PM	#2 Phase 82 File dlgbrnst.cpp, Line 1855
	Encoding video
	
4:09:23 PM	#3 Text 0 File VCDCompilationImpl.cpp, Line 490
	Using Nero Video Converter version 0.00
	
4:09:46 PM	#4 Text 0 File AVIVCDFileItem.cpp, Line 879
	Encoding C:\Documents and Settings\ryan\My Documents\New Folder\The Lord of the Rings -- The Return of the King (Extended Edition)\re2-extended-fico.avi to C:\DOCUME~1\ryan\LOCALS~1\Temp\NERF.tmp
	ScalingType: 1 Video: yes Audio: yes
	File size: 733644800 bytes
	Resolution: 608x256 25 Hz
	Frames: 140675
	
4:09:46 PM	#5 Text 0 File AVIVCDFileItem.cpp, Line 892
	Playing time: 5627.000000 s
	Requested rate: 150 KB/s
	iVideoRate=1250250
	iAudioRate=112
	Estimated size: 422025 blocks
	
4:10:49 PM	#6 Phase 40 File dlgbrnst.cpp, Line 1550
	Aborted by user
	
4:10:49 PM	#7 Text 0 File AVIVCDFileItem.cpp, Line 921
	Encoding done
	
4:10:49 PM	#8 Text 0 File AVIVCDFileItem.cpp, Line 985
	Temporary file C:\DOCUME~1\ryan\LOCALS~1\Temp\NERF.tmp deleted
	
4:10:49 PM	#9 Text 0 File VCDDoc.cpp, Line 2774
	SVCD options:
	-----------------------------------------------------
	Create standard compliant CD:    YES
	Encoding resolution:		     NTSC
	Encoding bitrate mode:           0
	Fit to size in min:              74
	Video directory:                 MPEG2
	ENTRIES.SVD file ID:             ENTRYVCD
	-----------------------------------------------------
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 11:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 48MB (49624kB)
Memory in use       : 90 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

1.11.2005
CueSheet
5:18:28 PM	#1 Phase 90 File dlgbrnst.cpp, Line 1855
	Buffer Underrun Protection activated
	
5:18:29 PM	#2 Text 0 File Reader.cpp, Line 126
	Reader running
	
5:18:29 PM	#3 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
5:18:29 PM	#4 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using CD-R/RW media
	
5:18:29 PM	#5 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:   359848 ( 79:59.73)
	Last address to be written:             203786 ( 45:19.11)
	
5:18:29 PM	#6 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
5:18:29 PM	#7 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B;
	   CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
5:18:29 PM	#8 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
5:18:29 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
	    2 indices, index0 (150) provided
	    original disc pos #0 + 450 (450) = #450/0:6.0
	    relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 450 blocks [HL-DT-ST DVDRAM GSA-4163B]
	 1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
	    2 indices, index0 (0) provided
	    original disc pos #0 + 203337 (203337) = #203337/45:11.12
	    relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 203337 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
5:18:29 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x20; Session Closed, disc fixated
	 Tracks 1 to 2:
	   1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos             0        352800       1411200, ISRC ""
	   2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos       1411200       1411200     479659824, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	     450 |        2 |   0 |   0x00 |  0x41
	     450 |        2 |   1 |   0x00 |  0x41
	  203787 | lead-out |   1 |   0x00 |  0x41
	
5:18:29 PM	#11 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
5:18:29 PM	#12 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
5:18:29 PM	#13 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
5:18:29 PM	#14 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 40x (6,000 KB/s)
	
5:18:29 PM	#15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
5:18:29 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450
	
5:18:29 PM	#17 Text 0 File Mmc.cpp, Line 16078
	StartDAO : CD-Text - Off
	
5:18:29 PM	#18 Text 0 File Mmc.cpp, Line 20698
	Set BUFE: supported -> ON 
	
5:18:29 PM	#19 Text 0 File Mmc.cpp, Line 16365
	CueData, Len=40
	41 00 00 34 00 00 00 00 
	41 01 00 21 00 00 00 00 
	41 01 01 21 00 00 02 00 
	41 02 01 21 00 00 08 00 
	41 aa 01 34 00 2d 13 0c 
	
5:18:39 PM	#20 Text 0 File Cdrdrv.cpp, Line 1297
	17:18:39.875 - HL-DT-ST DVDRAM GSA-4163B\H1 T1 : Queue again later
	
5:20:46 PM	#21 Text 0 File WriterStatus.cpp, Line 115
	<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 203787 (31C0Bh), lenght 0 blocks
	
5:20:50 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
5:20:50 PM	#23 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
5:20:50 PM	#24 Phase 37 File dlgbrnst.cpp, Line 1855
	Burn process completed successfully at 40x (6,000 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 93MB (96020kB)
Memory in use       : 81 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

1.11.2005
CueSheet
5:25:02 PM	#1 Phase 90 File dlgbrnst.cpp, Line 1855
	Buffer Underrun Protection activated
	
5:25:02 PM	#2 Text 0 File Reader.cpp, Line 126
	Reader running
	
5:25:02 PM	#3 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
5:25:02 PM	#4 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using CD-R/RW media
	
5:25:02 PM	#5 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:   359848 ( 79:59.73)
	Last address to be written:             267576 ( 59:29.51)
	
5:25:02 PM	#6 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
5:25:02 PM	#7 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B;
	   CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
5:25:02 PM	#8 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
5:25:02 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
	    2 indices, index0 (150) provided
	    original disc pos #0 + 450 (450) = #450/0:6.0
	    relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 450 blocks [HL-DT-ST DVDRAM GSA-4163B]
	 1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
	    2 indices, index0 (0) provided
	    original disc pos #0 + 267127 (267127) = #267127/59:21.52
	    relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 267127 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
5:25:02 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x20; Session Closed, disc fixated
	 Tracks 1 to 2:
	   1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos             0        352800       1411200, ISRC ""
	   2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos       1411200       1411200     629693904, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	     450 |        2 |   0 |   0x00 |  0x41
	     450 |        2 |   1 |   0x00 |  0x41
	  267577 | lead-out |   1 |   0x00 |  0x41
	
5:25:02 PM	#11 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
5:25:02 PM	#12 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
5:25:02 PM	#13 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
5:25:02 PM	#14 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 40x (6,000 KB/s)
	
5:25:02 PM	#15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
5:25:02 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450
	
5:25:02 PM	#17 Text 0 File Mmc.cpp, Line 16078
	StartDAO : CD-Text - Off
	
5:25:02 PM	#18 Text 0 File Mmc.cpp, Line 20698
	Set BUFE: supported -> ON 
	
5:25:02 PM	#19 Text 0 File Mmc.cpp, Line 16365
	CueData, Len=40
	41 00 00 34 00 00 00 00 
	41 01 00 21 00 00 00 00 
	41 01 01 21 00 00 02 00 
	41 02 01 21 00 00 08 00 
	41 aa 01 34 00 3b 1d 34 
	
5:25:13 PM	#20 Text 0 File Cdrdrv.cpp, Line 1297
	17:25:13.562 - HL-DT-ST DVDRAM GSA-4163B\H1 T1 : Queue again later
	
5:27:46 PM	#21 Text 0 File WriterStatus.cpp, Line 115
	<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 267577 (41539h), lenght 0 blocks
	
5:27:50 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
5:27:50 PM	#23 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
5:27:50 PM	#24 Phase 37 File dlgbrnst.cpp, Line 1855
	Burn process completed successfully at 40x (6,000 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26 (Nero Express)
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <Generic  DVD-ROM         >Version: 1.0  - HA 2 TA 0 - 6.3.1.26
 Adapter driver:      <d347prt>                 HA 2

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
Generic DVD-ROM            F:   CDRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 181MB (186016kB)
Memory in use       : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

3.11.2005
DVD-Copy on the fly
6:55:38 PM	#1 Text 0 File Reader.cpp, Line 126
	Reader running
	
6:55:38 PM	#2 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
6:55:38 PM	#3 Text 0 File DVDCopy.cpp, Line 271
	DVD Track-Information from source disc
	 S01 T01 Con 0x14 Start       0 Len 2239453 (gap       0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
	
6:55:38 PM	#4 Text 0 File DVDCopy.cpp, Line 374
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  2239453 =  2239453, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
6:55:38 PM	#5 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
6:55:38 PM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2239452 (497:39.27, 4373MB)
	
6:55:38 PM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
6:55:38 PM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
	 Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
	 Disc Application Code: 0, Extended Information Indicators: 1
	
6:55:38 PM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
6:55:39 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2239453 (2239453) = #2239453/497:39.28
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239453 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
6:55:39 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4586399744, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 2239453 | lead-out |   1 |   0x00 |  0x41
	
6:55:39 PM	#12 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 4x (5,540 KB/s)
	
6:55:39 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
6:55:39 PM	#14 Text 0 File Cdrdrv.cpp, Line 8228
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+RW  (9), Part Version: 2
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: re-writable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 1 h
	  Disc Manufacturer ID: INFODISC
	  Media type ID: A10
	  Product revision number: 1
	  Number of Physical format information bytes in use in ADIP up to byte 63: 57
	 Media Specific [16..63]:
	      00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39    ...INFODISCA10.9
	      23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B    #..|\.(..~p.(..{
	      68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00    h.(.............
	
6:55:39 PM	#15 Text 0 File DVDR.cpp, Line 4643
	Drive: HL-DT-ST DVDRAM GSA-4163B
	Book Type request: DVD-ROM
	Book Type setting not supported for the loaded disc type
	
6:55:39 PM	#16 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 14:03,322 (843322ms) -> OK
	
6:55:39 PM	#17 Text 0 File DVDPlusRW.cpp, Line 628
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
7:04:35 PM	#18 SCSI -400 File Cdrdrv.cpp, Line 1445
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07070000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0xA0
	Sense Qual: 0x80
	CDB Data:   0x2A 0x00 0x00 0x15 0x32 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x04 0x00 0x15 0x31 0x30 0x10 
	            0x09 0x01 0xBB 0x0F 0xA0 0x80 
	
7:04:35 PM	#19 CDR -400 File Writer.cpp, Line 304
	Unspecified target error
	
7:04:35 PM	#20 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
7:04:35 PM	#21 Text 0 File ThreadedTransfer.cpp, Line 223
	conversion idle, stopping reader
	
7:04:36 PM	#22 SCSI -1039 File Cdrdrv.cpp, Line 1191
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0xF1 0x00 0x04 0x00 0x15 0x31 0x30 0x10 
	            0x35 0x01 0x00 0x0F 0x09 0x01 
	
7:05:05 PM	#23 SCSI -1039 File Cdrdrv.cpp, Line 1191
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03623D4C
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 
	Sense Data: 0xF1 0x00 0x04 0x00 0x15 0x31 0x40 0x10 
	            0x35 0x01 0x00 0x0F 0x09 0x01 
	 ModeSel:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	            0x05 0x32 0x21 0xC4 0x08 0x00 0x00 0x00 
	            0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 
	            0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	            0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	            0x00 0x00 0x
	
7:05:05 PM	#24 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
7:05:05 PM	#25 SCSI -1039 File Cdrdrv.cpp, Line 1191
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03626000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00 
	Sense Data: 0xF1 0x00 0x04 0x00 0x15 0x31 0x70 0x10 
	            0x35 0x01 0x00 0x0F 0x09 0x01 
	
7:05:05 PM	#26 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
7:05:05 PM	#27 Phase 38 File dlgbrnst.cpp, Line 1855
	Burn process failed at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
Generic DVD-ROM            F:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 80MB (82116kB)
Memory in use       : 84 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

3.11.2005
ISO compilation
11:17:32 PM	#1 Text 0 File Isodoc.cpp, Line 6083
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
11:17:33 PM	#2 Text 0 File Reader.cpp, Line 126
	Reader running
	
11:17:33 PM	#3 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
11:17:33 PM	#4 ISO9660GEN -11 File geniso.cpp, Line 3899
	First writeable address = 0 (0x00000000)
	
11:17:33 PM	#5 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
11:18:04 PM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2285759 (507:56.59, 4464MB)
	
11:18:04 PM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
11:18:04 PM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
	 Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
	 Disc Application Code: 0, Extended Information Indicators: 1
	
11:18:04 PM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert the disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)
	This disc is not empty.
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)
	Accessing disc...
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)
	
11:18:04 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
11:18:04 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 2 to 2:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4681236480, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        2 |   0 |   0x00 |  0x41
	       0 |        2 |   1 |   0x00 |  0x41
	 2285760 | lead-out |   1 |   0x00 |  0x41
	
11:18:05 PM	#12 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
11:18:05 PM	#13 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
11:18:05 PM	#14 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
11:18:05 PM	#15 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 4x (5,540 KB/s)
	
11:18:05 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
11:18:05 PM	#17 Text 0 File Cdrdrv.cpp, Line 8228
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+RW  (9), Part Version: 2
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: re-writable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 1 h
	  Disc Manufacturer ID: INFODISC
	  Media type ID: A10
	  Product revision number: 1
	  Number of Physical format information bytes in use in ADIP up to byte 63: 57
	 Media Specific [16..63]:
	      00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39    ...INFODISCA10.9
	      23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B    #..|\.(..~p.(..{
	      68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00    h.(.............
	
11:18:05 PM	#18 Text 0 File DVDR.cpp, Line 4643
	Drive: HL-DT-ST DVDRAM GSA-4163B
	Book Type request: DVD-ROM
	Book Type setting not supported for the loaded disc type
	
11:18:05 PM	#19 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 14:20,040 (860040ms) -> OK
	
11:18:05 PM	#20 Text 0 File DVDPlusRW.cpp, Line 628
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
11:27:00 PM	#21 SCSI -400 File Cdrdrv.cpp, Line 1445
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03160000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0xA0
	Sense Qual: 0x80
	CDB Data:   0x2A 0x00 0x00 0x15 0x31 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x04 0x00 0x15 0x30 0x50 0x10 
	            0x09 0x01 0xBB 0x0F 0xA0 0x80 
	
11:27:00 PM	#22 CDR -400 File Writer.cpp, Line 304
	Unspecified target error
	
11:27:00 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
11:27:01 PM	#24 Text 0 File ThreadedTransfer.cpp, Line 223
	conversion idle, stopping reader
	
11:27:01 PM	#25 SCSI -1039 File Cdrdrv.cpp, Line 1191
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0xF1 0x00 0x04 0x00 0x15 0x30 0x50 0x10 
	            0x35 0x01 0x00 0x0F 0x09 0x01 
	
11:27:23 PM	#26 SCSI -1039 File Cdrdrv.cpp, Line 1191
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03623D4C
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 
	Sense Data: 0xF1 0x00 0x04 0x00 0x15 0x30 0x80 0x10 
	            0x35 0x01 0x00 0x0F 0x09 0x01 
	 ModeSel:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	            0x05 0x32 0x62 0x04 0x08 0x10 0x00 0x00 
	            0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x96 
	            0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	            0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	            0x00 0x00 0x
	
11:27:23 PM	#27 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
11:27:23 PM	#28 SCSI -1039 File Cdrdrv.cpp, Line 1191
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03627000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00 
	Sense Data: 0xF1 0x00 0x04 0x00 0x15 0x30 0xC0 0x10 
	            0x35 0x01 0x00 0x0F 0x09 0x01 
	
11:27:23 PM	#29 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
11:27:23 PM	#30 Phase 38 File dlgbrnst.cpp, Line 1855
	Burn process failed at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26 (Nero Express)
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
Generic DVD-ROM            F:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 172MB (176648kB)
Memory in use       : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

4.11.2005
CD-ROM (MP3)
4:28:44 PM	#1 Text 0 File Isodoc.cpp, Line 6083
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
4:28:44 PM	#2 Phase 90 File dlgbrnst.cpp, Line 1855
	Buffer Underrun Protection activated
	
4:28:45 PM	#3 Text 0 File Reader.cpp, Line 126
	Reader running
	
4:28:45 PM	#4 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
4:28:45 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3899
	First writeable address = 0 (0x00000000)
	
4:28:45 PM	#6 Text 0 File Burncd.cpp, Line 3152
	Turn on Track-at-once, using CD-R/RW media
	
4:28:45 PM	#7 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:   359848 ( 79:59.73)
	Last address to be written:              35566 (  7:56.16)
	
4:28:45 PM	#8 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
4:28:45 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B;
	   CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
4:28:45 PM	#10 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
4:28:45 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 35567 (35567) = #35567/7:54.17
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 35565 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
4:28:45 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200      73148416, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	   35567 | lead-out |   1 |   0x00 |  0x41
	
4:28:45 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
	Removed 2 run-out blocks from end of track 1. Length: 35567 -> 35565.
	
4:28:45 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
4:28:45 PM	#15 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
4:28:45 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
4:28:45 PM	#17 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 40x (6,000 KB/s)
	
4:28:45 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
4:28:45 PM	#19 Text 0 File Mmc.cpp, Line 20698
	Set BUFE: supported -> ON 
	
4:29:25 PM	#20 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
4:29:28 PM	#21 Text 0 File Mmc.cpp, Line 15518
	<HL-DT-STDVDRAM GSA-4163B> start Close Session
	
4:29:46 PM	#22 Phase 37 File dlgbrnst.cpp, Line 1855
	Burn process completed successfully at 40x (6,000 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
Generic DVD-ROM            F:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 188MB (192652kB)
Memory in use       : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

4.11.2005
CD-ROM (ISO)
4:35:35 PM	#1 Text 0 File Isodoc.cpp, Line 6083
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
4:35:35 PM	#2 Phase 90 File dlgbrnst.cpp, Line 1855
	Buffer Underrun Protection activated
	
4:35:35 PM	#3 Text 0 File Reader.cpp, Line 126
	Reader running
	
4:35:35 PM	#4 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
4:35:35 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3899
	First writeable address = 0 (0x00000000)
	
4:35:35 PM	#6 Text 0 File Burncd.cpp, Line 3152
	Turn on Track-at-once, using CD-R/RW media
	
4:35:36 PM	#7 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:   359848 ( 79:59.73)
	Last address to be written:              35566 (  7:56.16)
	
4:35:36 PM	#8 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
4:35:36 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B;
	   CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
4:35:36 PM	#10 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
4:35:36 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 35567 (35567) = #35567/7:54.17
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 35565 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
4:35:36 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200      73148416, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	   35567 | lead-out |   1 |   0x00 |  0x41
	
4:35:36 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
	Removed 2 run-out blocks from end of track 1. Length: 35567 -> 35565.
	
4:35:36 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
4:35:36 PM	#15 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
4:35:36 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
4:35:36 PM	#17 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 40x (6,000 KB/s)
	
4:35:36 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
4:35:36 PM	#19 Text 0 File Mmc.cpp, Line 20698
	Set BUFE: supported -> ON 
	
4:36:22 PM	#20 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
4:36:24 PM	#21 Text 0 File Mmc.cpp, Line 15518
	<HL-DT-STDVDRAM GSA-4163B> start Close Session
	
4:36:42 PM	#22 Phase 37 File dlgbrnst.cpp, Line 1855
	Burn process completed successfully at 40x (6,000 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
Generic DVD-ROM            F:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 201MB (206152kB)
Memory in use       : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

4.11.2005
CD-ROM (ISO)
4:48:08 PM	#1 Text 0 File Isodoc.cpp, Line 6083
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : FALSE
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
4:48:08 PM	#2 Phase 90 File dlgbrnst.cpp, Line 1855
	Buffer Underrun Protection activated
	
4:48:08 PM	#3 Text 0 File Reader.cpp, Line 126
	Reader running
	
4:48:08 PM	#4 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
4:48:08 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3899
	First writeable address = 0 (0x00000000)
	
4:48:08 PM	#6 Text 0 File Burncd.cpp, Line 3152
	Turn on Track-at-once, using CD-R/RW media
	
4:48:09 PM	#7 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:   359848 ( 79:59.73)
	Last address to be written:              54427 ( 12:07.52)
	
4:48:09 PM	#8 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
4:48:09 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B;
	   CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
4:48:09 PM	#10 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
4:48:09 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 54428 (54428) = #54428/12:5.53
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 54426 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
4:48:09 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     111775744, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	   54428 | lead-out |   1 |   0x00 |  0x41
	
4:48:09 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
	Removed 2 run-out blocks from end of track 1. Length: 54428 -> 54426.
	
4:48:09 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
4:48:09 PM	#15 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
4:48:09 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
4:48:09 PM	#17 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 40x (6,000 KB/s)
	
4:48:09 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
4:48:09 PM	#19 Text 0 File Mmc.cpp, Line 20698
	Set BUFE: supported -> ON 
	
4:49:01 PM	#20 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
4:49:03 PM	#21 Text 0 File Mmc.cpp, Line 15518
	<HL-DT-STDVDRAM GSA-4163B> start Close Session
	
4:49:40 PM	#22 Phase 37 File dlgbrnst.cpp, Line 1855
	Burn process completed successfully at 40x (6,000 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM 
Nero version: 6.3.1.26
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 1 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 6.3.1.26
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163   E:   CDRom1
Generic DVD-ROM            F:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 200MB (205312kB)
Memory in use       : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

6.11.2005
ISO compilation
1:38:14 PM	#1 Text 0 File Isodoc.cpp, Line 6083
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
1:38:14 PM	#2 Text 0 File Reader.cpp, Line 126
	Reader running
	
1:38:14 PM	#3 Text 0 File Writer.cpp, Line 124
	Writer HL-DT-ST DVDRAM GSA-4163B running
	
1:38:14 PM	#4 ISO9660GEN -11 File geniso.cpp, Line 3899
	First writeable address = 0 (0x00000000)
	
1:38:14 PM	#5 Text 0 File Burncd.cpp, Line 3152
	Turn on Disc-at-once, using DVD media
	
1:38:15 PM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:                607 (  0:08.07,    1MB)
	
1:38:15 PM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
1:38:15 PM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
	 Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
	 Disc Application Code: 0, Extended Information Indicators: 1
	
1:38:15 PM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
1:38:16 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 608 (608) = #608/0:8.8
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
1:38:16 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0       1245184, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	     608 | lead-out |   1 |   0x00 |  0x41
	
1:38:16 PM	#12 Phase 24 File dlgbrnst.cpp, Line 1855
	Caching of files started
	
1:38:16 PM	#13 Text 0 File Burncd.cpp, Line 4163
	Cache writing successful.
	
1:38:16 PM	#14 Phase 25 File dlgbrnst.cpp, Line 1855
	Caching of files completed
	
1:38:16 PM	#15 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 4x (5,540 KB/s)
	
1:38:16 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
1:38:16 PM	#17 Text 0 File Cdrdrv.cpp, Line 8228
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+RW  (9), Part Version: 2
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: re-writable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 1 h
	  Disc Manufacturer ID: INFODISC
	  Media type ID: A10
	  Product revision number: 1
	  Number of Physical format information bytes in use in ADIP up to byte 63: 57
	 Media Specific [16..63]:
	      00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39    ...INFODISCA10.9
	      23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B    #..|\.(..~p.(..{
	      68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00    h.(.............
	
1:38:16 PM	#18 Text 0 File DVDR.cpp, Line 4643
	Drive: HL-DT-ST DVDRAM GSA-4163B
	Book Type request: DVD-ROM
	Book Type setting not supported for the loaded disc type
	
1:38:16 PM	#19 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 3:27,228 (207228ms) -> OK
	
1:38:16 PM	#20 Text 0 File DVDPlusRW.cpp, Line 628
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
1:38:24 PM	#21 Text 0 File WriterStatus.cpp, Line 115
	<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 608 (260h), lenght 0 blocks
	
1:38:24 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
1:38:26 PM	#23 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
1:38:26 PM	#24 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
1:38:26 PM	#25 Phase 37 File dlgbrnst.cpp, Line 1855
	Burn process completed successfully at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

i think thtas all of it thankyou , i use 2 versions of nero because express doesnt work on 1 of them , its just a version i got off torrents .ryan

Here is an atempt i just tried u can see the error here

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:             <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 4 - 7.0.0.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <COMPAQ   CD-ROM LTN486S  >Version: YQSJ - HA 1 TA 0 - 7.0.0.0
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD400EB-00CPF0               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : COMPAQ CD-ROM LTN486S            atapi Port 1 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4163B        atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
COMPAQ CD-ROM LTN486S      D:   CDRom0
HL-DT-ST DVDRAM GSA-4163B  E:   CDRom4
Generic DVD-ROM            F:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 503MB (515568kB)
Free physical memory: 144MB (147664kB)
Memory in use       : 71 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

6.11.2005
ISO compilation
6:15:21 PM	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
6:15:21 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 71680KB of Memory
	
6:15:21 PM	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
6:15:21 PM	#4 Text 0 File Writer.cpp, Line 113
	Writer E: HL-DT-ST DVDRAM GSA-4163B running
	
6:15:21 PM	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
6:15:21 PM	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
6:15:22 PM	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2285759 (507:56.59, 4464MB)
	
6:15:22 PM	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD)
	
6:15:22 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
	 Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
	 Disc Application Code: 0, Extended Information Indicators: 1
	
6:15:22 PM	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
6:15:22 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [E: HL-DT-ST DVDRAM GSA-4163B]
	--------------------------------------------------------------
	
6:15:22 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [E: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4681236480, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2285760 | lead-out |   1 |    0x41 | 0x00
	
6:15:22 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
6:15:22 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
6:15:23 PM	#15 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
6:15:23 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
6:15:23 PM	#17 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 4x (5,540 KB/s)
	
6:15:23 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
6:15:23 PM	#19 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+RW  (9), Part Version: 1.1x (2)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: re-writable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 1 h
	  Disc Manufacturer ID: INFODISC
	  Media type ID: A10
	  Product revision number: 1
	  Number of Physical format information bytes in use in ADIP up to byte 63: 57
	 Media Specific [16..63]:
	      00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39    ...INFODISCA10.9
	      23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B    #..|\.(..~p.(..{
	      68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00    h.(.............
	
6:15:23 PM	#20 Text 0 File DVDR.cpp, Line 5281
	Drive: HL-DT-ST DVDRAM GSA-4163B
	Book Type request [LG]: DVD-ROM
	Book Type setting not supported for the loaded disc type
	
6:15:23 PM	#21 Text 0 File DVDPlusRW.cpp, Line 666
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
6:24:12 PM	#22 SPTI -1 File SCSIPassThrough.cpp, Line 306
	CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0xA0
	Sense Qual: 0x80
	CDB Data:   0x2A 00 00 15 31 A0 00 00 20 00 00 00 
	Sense Area: 0xF0 00 04 00 15 30 10 10 09 01 BB 0F A0 80 
	Buffer x04a90000: Len x10000
	0x00 00 01 BA 44 D8 67 4E CC 55 01 89 C3 F8 00 00 
	0x01 E0 07 EC 81 00 00 03 24 1A 22 A6 1A 19 9D FF 
	0xE0 44 05 F7 F3 B8 0F E0 3C B2 7B 01 BF 24 06 44 
	
6:24:12 PM	#23 CDR -1 File Writer.cpp, Line 302
	Unspecified Recorder Error
	E: HL-DT-ST DVDRAM GSA-4163B
	
6:24:12 PM	#24 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
6:24:13 PM	#25 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
6:24:13 PM	#26 SPTI -1039 File SCSIPassThrough.cpp, Line 306
	CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1039)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0x35 02 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0xF1 00 04 00 15 30 10 10 35 01 00 0F 09 01 
	
6:24:26 PM	#27 SPTI -1039 File SCSIPassThrough.cpp, Line 306
	CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1039)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x01
	CDB Data:   0x55 10 00 00 00 00 00 00 3C 00 00 00 
	Sense Area: 0xF1 00 04 00 15 30 20 10 35 01 00 0F 09 01 
	Buffer x0382fe00: Len x3c
	0x00 00 00 00 00 00 00 00 05 32 20 27 08 00 00 00 
	0x20 00 00 00 00 20 00 96 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:24:26 PM	#28 Phase 38 File dlgbrnst.cpp, Line 1724
	Burn process failed at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 10:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

@turtle212 -

1A20-************************
1A23-************************

  • as you’ve pasted more than one section of logfile, your serial numbers have crept in, EDIT them ALL out…

Nero Version: 7.0.0.0

  • i think there’s an update to 7.0.12, but i still don’t trust Nero 7.x, seeing far too many problems with it yet…

Recorder: Version: A104 - HA 1 TA 4

  • Have you got two LG burners ?, i can see one below, set as Secondary Slave. Is this one USB-attached ?. Also, the firmware is one version behind, A105 is on one of the LG sites

Bus Type : default (0) -> ATAPI, detected: ?

  • that question mark is saying your ATAPI drivers aren’t loaded correctly, or you have a USB burner. Being as your DMA settings aren’t all ON in the next paragraph, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm

DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : COMPAQ CD-ROM LTN486S atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

  • DMA needs to be ON, see previous comment. Have you got two LG burners by the way ?

Physical memory : 503MB (515568kB)
Free physical memory: 144MB (147664kB)
Memory in use : 71 %

  • free memory isn’t too bad, but try to close down more programs prior to dvd work/burning to free up more memory

Multisession : TRUE
Multisession type: : Start multisession

  • just checking you meant to do multisession ?

Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285759 (507:56.59, 4464MB)

  • 4464MB is a little too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink’s preferences thus avoiding outer edge and not sacrificing much space

Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

  • can’t remember if the 4163B is able to booktype +RW discs or not without checking. In Nero, go to ‘recorders/choose recorder/options’ and change booktype setting to ‘auto’. as i say, can’t remember if this drive booktypes +RW media but i’ll check. At least if this is set to auto it will auto-booktype normal +R discs fine…

Unspecified Recorder Error

  • splat!

Existing drivers:
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)

  • InCD is Nero’s horrid ‘packet writing software’, uninstall Nedro then uninstall completely via Nero’s Clean Tools, then reinstall Nero WITHOUT installing InCD

Also, the ATAPI drivers are supposed to be listed in this section, this will be sorted by fixing DMA further up my reply

creaky ive got nero 7 and evthing works fine ,it just gives the error and doesnt burn it just hapened when i installed a few things i think , it does exactly the same in dvddecriptor and santa and express ?

if you’re happy with 7.0 stick with it, but update it and follow my other suggestions and let me know how you get on…

This may be the source of your problems :

INFODISCA10 is just about the worst 4x DVD+RW media in existence. To begin with Infodisc is infamous for making all kinds of fake media. It is usually either Infodisc or Princo people use when they need something to describe the worst media in existence.

I have a few pieces of this stuff and I only use it for recording on my DVD recorder (set top box). I figured it burns at only 1x so it should work even if it is Infodisc. Big mistake. Last week I found that I had trouble reading one of these INFODISCA10 discs which had some TV programs recorded on it. I attempted to do a full erase on it with my 4163B writer to see if that would revive it. After that I tried writing a nearly full disc of data on it and told Nero to verify the write. Nero could not read the disc back at all. I did a quality scan on my BenQ DW 1640 and you should have seen the number of PO failures. Unfortunately, I didn’t save the scan. I just tried to do a scan again a few minutes ago so I could post that. It’s gotten even worse. I now get a “no disc inserted error”.

This disc was only written to and erase 4 times since I bought it. It’s now going in the trash.

Try your burn tests again with some other DVD+RW other than INFODISCA10, please. That disc could be the cause of all your misery!

Oh yes, and the LG GSA 4163B cannot book type DVD+RW media. It only book types DVD+R and DVD+DL.

Am a newbie and i did’t know how to start a new thread and since i am a little worried am posting mu Q here:

  1. I bought LG4167B, 2 days before and i have already burnt 1 dvd - r media.I got to know that DL12 f/w has been released and i wnted to flsah mine DL10 with this one.Will my warranty of 1 year be void if i do this?

2)can i upgrade from DL10 to DL12 directly or i need to flash even DL11 to get all upgraded features?

3)what r the chances of my drive getting spoilt doing this?

4)Finally, i am not able to d/l DL12 from lgservices, when i click the link i get the message " Not Authorised "?i have already registered with them. Can anyone please let me know any oter site where its been uploaded?

Please anyone help me out…
Thanks a lot…

@cooltunt - i haven’t got links to hand but DL12 and other firmware is indeed freely available for you and anyone else out there. there’s nothing wrong with using official firmware updates, you need to use these to allow you to use newer media/burn speeds etc cus that’s some of the things firmware do for your drive.

i’m sure i read stuff about ppl not being able to go from DL10 to DL12. just try it and report back if it don’t work, i’m sure we can find the link i’m thinking about.

just make sure you’re aware of the precautions when updating firmware, ie no resetting pc during the update, pray for no power cut, apparently you should never have a disc in the burner when you update the firmware too…

thanks a lot creaky, will search for the DL12 and the n flash as soon as possible and then will let know if any prblems occured…

hey guys thanks for yr help ,guess wot it was just the disc lol i feel stupid but its all good now tc ryan

I’m still having some problems with my 4167B DL11.

I removed my Force 1.7 ASPI drivers so as to just use the Nero ones and tried buring a DVD-Video image tonight. What do you, it worked 1st time. Tried buring a second DVD-Video disc and it failed.

Decided to check what media it was as I’m starting to think it could be the media, but both disc same the same (see below)


Unique Disc Identifier : [DVD-R:CMC MAG. AE1]

Disc & Book Type : [DVD-R] - [DVD-R]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG. AE1]
Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]

[ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ]

I’m starting to lose patience with this drive. Any clues.

BTW. It is possible to go from DL10 to DL12. I also chose to go back to DL11 just in case.

Thanks

i’d say try some better media…