LG-4163B & C2 Errors

Are the C2 errors too high?

General Information
Drive: HL-DT-STDVDRAM GSA-4163B
Firmware: A102
Disc: Data CD
Selected speed: 40 X
C1 errors
Maximum: 0
Average: 0.00
Total: 0
C2 errors
Maximum: 24
Average: 2.42
Total: 6444
Jitter: n/a
Scanning statistics
Elapsed time: 2:00
Number of samples: 2665
Average scanning interval: 1.00 sec
Glitches removed: 0

Using 48X FujiFilm CD-Rs:
Disc Type CDR (A-)
Manufacturer Taiyo Yuden Company Limited
Material Cyanine
Media ID 97:24:01
Length 79:59:72
Capacity 702.80 MB
Free Size 702.80 MB
Free Blocks 359845
Total Tracks -1
Maximum Read Speed 40x
Maximum Write Speed 40x
Current Write Speed 40x CLV
Write Speed Performance Descriptor 1 40x CLV
Write Speed Performance Descriptor 2 32x CLV
Write Speed Performance Descriptor 3 24x CLV
Write Speed Performance Descriptor 4 16x CLV
Write Speed Performance Descriptor 5 8x CLV
Write Speed Performance Descriptor 6 4x CLV

Good discs do not show C2 errors at all.

So is there anything that I’ve been doing wrong or is it the drive?

Probably the discs are ok but the 4163 as a reader finds fale C2’s. Don’t you have another drive to test your CD-R’s?

I’ll dig up my Lite-On DVD reader and give it a try.

What I find more interesting is the fact that LG does not supported in CDSpeed’s disc quality test. That is what I have read here and that is what my drive shows on both DVDs and CDs. How did you get that?

Is checking c2 error with 4163B possible??

for CD yes…but only to version 3.61…above the disc quality test is not avaible…i dont know why…

all LG drivers support c2 errors return…

Just for CD with V3.61???

Thats not good

I test this option to version cddvdspeed v3.55 and earlier. Sorry v3.61 may not work i not tested this version.