Leesfout met nero6

vbimport

#1

cd writer memup ide 1008 geeft telkens fouten met het schrijven van dvdvideo kan snelheid 4x en 2x niet halen ,ik gebruik dvd-r
1-4x speed van princo heb al met ander schijfjes geprobeerd
steeds hetzelfde probleem , ik kan blijkbaar niet schrijven op 1x speed met nero6 hij gaat maar tot 2xspeed of weet iemand waar ik dat kan veranderen in nero ,
ik heb hier het logboek van mijn foutmelding misschien kunnen jullie daar iets uit maken

dank u voor jullie hulp

PAPA

1A22-020K-0530-1349-1219-9976*

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 28/04/2004 16:35:54
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
Nero-versie: 6.0.0.16
Recorder: <MEMUP IDE1008> Versie: 0052 - HA 1 TA 0 - 6.0.0.16
Adapter-stuurprogramma:<atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <IDE DVD-ROM 16X >Versie: 1.3! - HA 0 TA 1 - 6.0.0.16
Adapter-stuurprogramma:<atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 0 ID 1 DMA: On
CdRomPeripheral : MEMUP IDE1008 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
IDE DVD-ROM 16X F: CDRom0
MEMUP IDE1008 G: CDRom1

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 95MB (97592kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.4.2004
UDF/ISO-compilatie
14:46:23 #1 Phase 112 File dlgbrnst.cpp, Line 1843
Opnieuw toewijzen DVD-Videobestanden gestart

14:46:23 #2 Phase 114 File dlgbrnst.cpp, Line 1843
Opnieuw toewijzen DVD-Videobestanden voltooid (geen bestand gewijzigd)

14:46:23 #3 Text 0 File Isodoc.cpp, Line 5907
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:46:23 #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Videobestanden gesorteerd

14:46:23 #5 Text 0 File Reader.cpp, Line 118
Reader running

14:46:23 #6 Text 0 File Writer.cpp, Line 127
Writer MEMUP IDE1008 running

14:46:23 #7 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

14:46:23 #8 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

14:46:24 #9 Text 0 File Burncd.cpp, Line 3169
Turn on Disc-at-once, using DVD media

14:46:27 #10 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2147055 (477:07.30)

14:46:27 #11 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

14:46:27 #12 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: MEMUP IDE1008, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

14:46:27 #13 Text 0 File DlgWaitCD.cpp, Line 393
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:46:27 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2147056 (2147056) = #2147056/477:7.31
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2147056 blocks [MEMUP IDE1008 ]
--------------------------------------------------------------

14:46:28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [MEMUP IDE1008 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4397477888, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2147056 | lead-out | 1 | 0x00 | 0x41

14:46:28 #16 Phase 24 File dlgbrnst.cpp, Line 1843
Begin met cache-opslag van bestanden

14:46:28 #17 Phase 25 File dlgbrnst.cpp, Line 1843
Cache-opslag van bestanden voltooid

14:46:28 #18 Phase 28 File dlgbrnst.cpp, Line 1843
Begin snelheidsmeting

14:46:29 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:04:01 #20 Text 0 File WriterStatus.cpp, Line 113
<MEMUP IDE1008 > start writing Lead-Out at LBA 2147056 (20C2F0h), lenght 0 blocks

15:04:01 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:04:01 #22 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:04:01 #23 Phase 29 File dlgbrnst.cpp, Line 1793
Snelheidsmeting voltooid: 2,9x (4.002 kB/sec)

15:04:01 #24 Text 0 File Burncd.cpp, Line 4132
Kan alleen schrijven met 2x in plaats van 4x,

omdat de snelheid van de brondata te laag is

15:04:01 #25 Phase 36 File dlgbrnst.cpp, Line 1843
Begin brandproces met 2x (2.760 kB/sec)

15:04:01 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:04:01 #27 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 26:35,145 (1595145ms) -> OK

15:04:01 #28 Text 0 File DVDR.cpp, Line 1479
Recording mode: Sequential Recording Mode

15:04:01 #29 Text 0 File Mmc.cpp, Line 19140
Set BUFE: Super Link -> ON

15:04:01 #30 Text 0 File DVDR.cpp, Line 1594
Start write address at LBA 0
DVD high compatibility mode: Yes

15:04:01 #31 Text 0 File Cdrdrv.cpp, Line 7909
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

15:04:12 #32 Text 0 File Writer.cpp, Line 318
15:04:12.390 - MEMUP IDE1008 : Queue again later (Intervall : 11msec)

15:12:12 #33 SCSI -1135 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x034B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

15:12:12 #34 CDR -1135 File Writer.cpp, Line 335
Schrijffout

15:12:12 #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:12:12 #36 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:12:12 #37 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:12:12 #38 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:12:12 #39 Phase 38 File dlgbrnst.cpp, Line 1843
Brandproces mislukt met 2x (2.760 kB/sec)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 10:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

:confused: :confused:


#2

Hoi Hastalavista en welkom op het forum.

14:46:27 #12 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: MEMUP IDE1008, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

Ew … princo’s… Niet het beste merk ter wereld.

15:04:01 #24 Text 0 File Burncd.cpp, Line 4132
Kan alleen schrijven met 2x in plaats van 4x,

omdat de snelheid van de brondata te laag is

Dat ook weer verklaard. Misschien je IDE devices niet op DMA staan ?

15:12:12 #34 CDR -1135 File Writer.cpp, Line 335
Schrijffout

Hier gaat het al fout

15:12:12 #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:12:12 #36 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:12:12 #37 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:12:12 #38 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:12:12 #39 Phase 38 File dlgbrnst.cpp, Line 1843
Brandproces mislukt met 2x (2.760 kB/sec)

Lijkt erop dat de media gewoon rot is. Probeer eens wat anders dan Princo’s.