Ldw-411s and nero wont work

vbimport

#1

Hello I am having problems with my liteon ldw-411s drive burning my dvd-r ritek G04s. I have tryed both firmware version FS0F and FS0H plus i replaced my round ide cable with a new 80 pin ribbon cable. My system is :
ECS KS75A rev 1
amd xp 2100+
256MB DDR RAM
runing windows xp pro
nero version 6.3.0.0
powerdvd xp
pinnacle sudio 8.3

Everytime I try to burn a disk I get a session fixation error after the burn gets to 100% in nero. I have no clue what a session fixation error even is :confused:

here is a log of the burn.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 2:03:36 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 2:49:52 PM
Nero version: 6.3.0.0 (Nero Express)
Recorder: <LITE-ON DVDRW LDW-411S> Version: FS0H - HA 1 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW LDW-411S >Version: FS0H - HA 1 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 5T030H3 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 5T030H3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-411S F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 52MB (54008kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.2.2004
UDF/ISO compilation
4:14:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

4:14:40 PM #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

4:14:40 PM #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings


Determine maximum speed : FALSE
Simulate                : FALSE
Write                   : TRUE
Finalize CD             : TRUE
Multisession            : FALSE
Burning mode            : DAO
Mode                    : 1
ISO Level               : 1 (Max. of 11 = 8 + 3 char)
Character set           : ISO 9660
Joliet                  : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path  : FALSE
Write ISO9660 ;1 file extensions        : TRUE

4:14:40 PM #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

4:14:40 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

4:14:40 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-411S running

4:14:40 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

4:14:40 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

4:14:40 PM #9 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using DVD media

4:14:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2199823 (488:50.73)

4:14:41 PM #11 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

4:14:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

4:14:41 PM #13 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:14:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2199824 (2199824) = #2199824/488:50.74
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199824 blocks [LITE-ON DVDRW LDW-411S ]


4:14:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON DVDRW LDW-411S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4505239552, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2199824 | lead-out | 1 | 0x00 | 0x41

4:14:41 PM #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

4:14:41 PM #17 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

4:14:41 PM #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

4:14:41 PM #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

4:14:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:14:41 PM #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 13:39,122 (819122ms) -> OK

4:14:41 PM #22 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode

4:14:41 PM #23 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON , SMART-BURN : ON

4:14:41 PM #24 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

4:14:41 PM #25 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:14:49 PM #26 Text 0 File Cdrdrv.cpp, Line 1276
16:14:49.528 - LITE-ON DVDRW LDW-411S\H1 T0 : Queue again later

4:28:48 PM #27 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-411S > start writing Lead-Out at LBA 2199824 (219110h), lenght 0 blocks

4:28:48 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:28:48 PM #29 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 2199823

4:29:16 PM #30 SCSI -1176 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

4:29:16 PM #31 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

4:29:16 PM #32 CDR -1176 File ThreadedTransferInterface.cpp, Line 1659
Session fixation error

4:29:16 PM #33 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1659
Could not perform end of Disc-at-once

4:29:16 PM #34 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was -1

4:29:16 PM #35 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

4:29:16 PM #36 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

4:29:16 PM #37 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 2:03:36 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 12:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any Help would be apriated. Oh before i got this new 25 pack or Ritek DVD-Rs i have been using TDK wich are rebranded Ritek and I have had some success geting 3 out of 5 disks to burn successfull. The two worked and then the third one worked when i unchecked finalize disk.


#2

I had similar issues with Nero. It worked with some media, and did not with others.

I started using Gear DVD Standard Edition to burn my DVD Video’s and DVD ISO/UDF Data disks. Works like a charm. Have yet to burn a single coaster with this program. The same media fails in Nero. BTW I’m using firmware FS0H on a Liteon LDW-411S.

You might try using Gear with the latest Gear drivers.

xytise


#3

Thanks for the reply I managed to fix it. I searched for the same error i got on google and found this http://www.coujo.de/ib/index.php?showtopic=1334

that regfix utill that nero offers managed to find stuff in the registry that was botched and fixed it. After i did that i was able to succesfully burn dvds with it.

That Gear Dvd looks like a good program. I am going to look into geting it for myself thanks :slight_smile: