LaserLock - How long does your burner take for a read?

vbimport

#1

LITEON LTD-24102B

    [li]FES=Hardware & none, IBSS=100[]Title: Desperados[]CloneCD v4 beta 30[]Brand/Model: UDMA33 Liteon 24102B FW: 5s07[]Rig: Master with UDMA33 Toshiba SD-M1402 slave on Leadtek WinFast ATA100 PCI card[]DMA enabled and running; ASPI 4.60[]System: PIII 933; DFI Intel 815EP; 512 MB PC133; ATA66+ 40 pin/80 conductor cables
[/li]> I 6:48:03 PM Duration of operation: 00:10:53

I 6:48:03 PM Average Speed: 1222 kBytes/s (6.95)
I 6:48:03 PM Reading finished!
http://www.cdfreaks.com/images/forum/fp/24102bll.log

CloneCD 3341

I 7:10:19 PM Scanning bad sectors...
W 7:10:29 PM Writing Dummy Sectors 7203 to 7282
I 7:15:23 PM Duration of operation: 00:08:14
I 7:15:23 PM Reading finished!
http://www.cdfreaks.com/images/forum/fp/desperadol.log I am not sure why v3 takes 20% less time...


#2

[ul][li]CloneCD v4 beta 30[]Title: Desperados[]Settings: FES=Hardware & None; IBSS=100[]Brand/Model: UDMA33 ASUS CRW-4012A FW: 1.0[]Rig: Master with UDMA33 Toshiba SD-M1402 slave on Leadtek WinFast ATA100 PCI card[]DMA enabled and running; ASPI 4.60[]System: PIII 933; DFI Intel 815EP; 512 MB PC133; ATA66+ 40 pin/80 conductor cables[/ul][/li]> I 2:33:53 PM Duration of operation: 00:03:06

I 2:33:53 PM Average Speed: 4495 kBytes/s (25.54)
I 2:33:53 PM Writing finished!
http://www.cdfreaks.com/images/forum/fp/4012all.log


#3

[ul][li]CloneCD v4 beta 30
[/li][li]Game: Desperados (original)
[/li][li]Brand/Model: UDMA33 MITSUMI CR-480ATE FW: 1.0C
[/li][li]DMA enabled and running; ASPI 4.60
[/li][li]System: ATHLON 700; 256 MB PC133; ATA66+ 40 pin/80 +ATA 33 40pin/40 conductor cables[/ul][/li]```
I 10:50:20 Duration of operation: 00:19:11
I 10:50:20 Average Speed: 693 kBytes/s (3.94)
I 10:50:20 Reading finished!

http://www.cdfreaks.com/images/forum/gf/MitsumiCR480ATE.log

#4

[ul][li]CloneCD v4 beta 30
[/li][li]Game: Desperados (original)
[/li][li]Brand/Model: UDMA33 TEAC CD-W540E FW: 1.0B
[/li][li]DMA enabled and running; ASPI 4.60
[/li][li]System: ATHLON 700; 256 MB PC133; ATA66+ 40 pin/80 +ATA 33 40pin/40 conductor cables[/ul][/li]```
I 11:31:41 Duration of operation: 00:32:10
I 11:31:41 Average Speed: 413 kBytes/s (2.35)
I 11:31:41 Reading finished!

http://www.cdfreaks.com/images/forum/gf/TEACCDW540E.log

Note that a back-up disc is read in under 9 minutes

#5

[ul][li]CloneCD v4 beta 30[]Title: Desperados[]Settings: FES=Hardware & None; IBSS=100[]Brand/Model: UDMA33 Acer CRW-1210A FW: G.KF[]Rig: Master with UDMA33 Liteon LTD-24102B slave on Leadtek WinFast ATA100 PCI card[]DMA enabled and running; ASPI 4.60[]System: PIII 933; DFI Intel 815EP; 512 MB PC133; ATA66+ 40 pin/80 conductor cables[/ul][/li]> I 6:47:31 PM Duration of operation: 00:26:28

I 6:47:31 PM Average Speed: 502 kBytes/s (2.86)
I 6:47:31 PM Reading finished!
http://www.cdfreaks.com/images/forum/fp/1210all.log


#6
  • [li]CloneCD v4 beta 30[]Title: Desperados[]Settings: FES=Software & 1; IBSS=100[]Brand/Model: UDMA33 TDK VeloCD X481240A FW: 1t00[]Rig: Master with UDMA33 Liteon LTD-24102B slave on Leadtek WinFast ATA100 PCI card[]DMA enabled and running; ASPI 4.60[]System: PIII 933; DFI Intel 815EP; 512 MB PC133; ATA66+ 40 pin/80 conductor cables[*]Regenerate data sectors was checked “on” - I will see if this can be done faster wihout it - TBA - [edit]Nope![/edit]

I 2:55:04 AM Average Speed: 37 kBytes/s (0.21)
I 2:55:04 AM Reading finished!
http://www.cdfreaks.com/images/forum/fp/x401248all.log


#7

[ul][li]CloneCD v4 beta 30[]Title: Desperados[]Settings: FES=Hardware & 0; IBSS=100[]Brand/Model: UDMA33 Toshiba SD-M1402 (DVD) FW: 1010[]Rig: Master with UDMA33 Liteon LTD-24102B slave on Leadtek WinFast ATA100 PCI card[]DMA enabled and running; ASPI 4.60[]System: PIII 933; DFI Intel 815EP; 512 MB PC133; ATA66+ 40 pin/80 conductor cables[*]Reamarks: Toshiba DVD-ROMs are recommended by elby for reading; so I 've included a Toshi read here among the writers[/ul][/li]> I 6:47:31 PM Duration of operation: 00:26:28

I 6:47:31 PM Average Speed: 502 kBytes/s (2.86)
I 6:47:31 PM Reading finished!
http://www.cdfreaks.com/images/forum/fp/sd-m1402ll.log


#8

[ul][li]CloneCD v4001[]Title: Desperados[]Settings: FES=Hardware & None; IBSS=100[]Brand/Model: UDMA33 LITEON LTR-32123S FW: XS0R[]Rig: Master with UDMA33 Toshiba SD-M1402 slave on ATA100 IDE 2[]DMA enabled and running; ASPI 4.60[]System: PIII 933; DFI Intel 815EP; 512 MB PC133; ATA66+ 40 pin/80 conductor cables[/ul][/li]> I 7:10:03 PM Duration of operation: 00:10:50

I 7:10:03 PM Average Speed: 1228 kBytes/s (6.98)
I 7:10:03 PM Reading finished!
http://www.cdfreaks.com/images/forum/fp/32123sll.log


#9
  • [li]CloneCD v4001
    [/li][li]Title: Desperados
    [/li][li]Settings: FES=Hardware & None; IBSS=100
    [/li][li]Brand/Model: LITEON LTR-40125S FW: ZS0D
    [/li][li]Rig: Master on ATA100 IDE 2
    [/li][li]DMA enabled and running; ASPI 4.70
    [/li][li]System: Athlon 1,46GHz; MSI K7T Turbo-R Limited edition
    [/li]KT133A; 512 MB PC133; ATA100 40 pin/80 conductor cables

I 12:16:51 Duration of operation: 00:12:51
I 12:16:51 Average Speed: 1035 kBytes/s (5.88)
I 12:16:51 Reading finished!


#10
  • [li]CloneCD v4001
    [/li][li]Title: Desperados
    [/li][li]Settings: FES=Hardware & None; IBSS=100
    [/li][li]Brand/Model: ASUS E616 DVD-ROM FW: 2.0
    [/li][li]Rig: Slave on ATA100 IDE 1 (ekstra controller card)
    [/li][li]DMA enabled and running; ASPI 4.70
    [/li][li]System: Athlon 1,46GHz; MSI K7T Turbo-R Limited edition
    [/li]KT133A; 512 MB PC133; ATA100 40 pin/80 conductor cables

I 12:25:59 Duration of operation: 00:06:46
I 12:25:59 Average Speed: 1966 kBytes/s (11.17)
I 12:25:59 Reading finished!


#11

[ul][li]CloneCD v4016[]Title: Desperados[]Settings: FES=Hardware & None; IBSS=100[]Brand/Model: UDMA33 ASUS CRW-4816A FW:1.0 []Rig: Slave with UDMA33 Liteon 40123 master on ATA100 IDE 2[]DMA enabled and running; ASPI 4.60[]System: PIII 933; MSI 6337 Pro-R 815EP; 512 MB PC133; ATA66+ 40 pin/80 conductor cables[/ul][/li]> I 9:06:19 PM Duration of operation: 00:03:13

I 9:06:19 PM Average Speed: 4136 kBytes/s (23.50)
I 9:06:19 PM Reading finished!


#12

Just wondering why u selected
Settings: FES=Software & 1 for the tdk velo and is that why it was so slow can it not do hardware fes


#13

Originally posted by UNCOGNITO
Just wondering why u selected
Settings: FES=Software & 1 for the tdk velo and is that why it was so slow can it not do hardware fes

Won’t work in Hardware. Most devices are slow in LaserLock anyway. Software is slower, but, hey, TDK don’t make 'em to defeat copy protection!