Jpg Back-up burn fails on multiple drives! Both CD and DVD!

vbimport

#1

I have a Lite-On 1633S DVD burner and a Micro Advantage 52x cd burner. I’m trying to back up photos that I’ve taken with my digital camera. The files I’m burning are almost entirely jpgs, with a couple of very small avi files and gifs thrown in as well.

When I try to burn the files to DVD nero says:

caching started
caching completed
burn started 4x
error reading data
generating DVD high compatibility borders
DVD high compatibility borders completed successfully
burn process failed at 4x (5540 KB/s)

When I try to burn a CD in the Micro Advantage drive I get almost the same output only without the lines about DVD high compatibility borders.

In both cases it doesn’t really seem to actually start burning before the burn fails; it happens almost immediately after the caching is completed; and the CD or DVD media I try to burn with is still recognized by the computer as blank media.

As you can tell, obviously, I don’t think my problem is due to bad media or bad burners (although I suppose I could be wrong, somehow)

Here is the log for the DVD burning:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 1:06:00 PM
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c

Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS41 - HA 3 TA 1 - 6.6.0.12
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.12
Adapter driver: <d347prt> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : WDC WD1600JB-00FUA0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : CDWRITER IDE5232 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM G: CDRom2
CDWRITER IDE5232 E: CDRom1
LITE-ON DVDRW SOHW-1633S D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 819MB (838656kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.4.2005
ISO compilation
8:58:31 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:58:32 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

8:58:32 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

8:58:32 PM #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

8:58:32 PM #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1007935 (223:59.10, 1968MB)

8:58:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

8:58:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 1

8:58:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:58:32 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1007936 (1007936) = #1007936/223:59.11
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1007936 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

8:58:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2064252928, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1007936 | lead-out | 1 | 0x41 | 0x00

8:58:32 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:58:33 PM #12 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

8:58:33 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:58:33 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

8:58:33 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:58:33 PM #16 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 …RICOHJPNR01.8
23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7…<g…b…
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 …

8:58:33 PM #17 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes

8:58:40 PM #18 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

8:58:40 PM #19 Text 0 File Reader.cpp, Line 385
Exception value: -1

8:58:40 PM #20 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers

8:58:40 PM #21 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

8:58:40 PM #22 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

8:58:40 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 1:06:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\d347prt.sys’: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 5:31:48 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Here is the log for the CD burning with the Micro Avantage CD burner:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 1:06:00 PM
ahead WinASPI: File ‘C:\PROGRA~1\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c

Recorder: <CDWRITER IDE5232> Version: 000J - HA 3 TA 0 - 6.6.0.12
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.12
Adapter driver: <d347prt> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : WDC WD1600JB-00FUA0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : CDWRITER IDE5232 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM G: CDRom2
CDWRITER IDE5232 E: CDRom1
LITE-ON DVDRW SOHW-1633S D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 798MB (817984kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.4.2005
CD-ROM (ISO)
8:55:28 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:55:28 PM #2 Text 0 File Burncd.cpp, Line 2868
CDWRITER IDE5232
Super Link activated

8:55:28 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

8:55:28 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

8:55:28 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

8:55:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 345315 ( 76:46.15)

8:55:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

8:55:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: CDWRITER IDE5232;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

8:55:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

8:55:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 345316 (345316) = #345316/76:44.16
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 345316 blocks [CDWRITER IDE5232]
--------------------------------------------------------------

8:55:41 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [CDWRITER IDE5232] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 707514368, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
345316 | lead-out | 1 | 0x41 | 0x00

8:55:41 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:55:41 PM #13 WINPFILE 2 File winpfile.cpp, Line 274
The system cannot find the file specified.

C:\Documents and Settings\Owner\My Documents\My Pictures\11-04-04\jpeggeri.dat

8:55:41 PM #14 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

8:55:41 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:55:43 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 52x (7,800 KB/s)

8:55:43 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:55:43 PM #18 Text 0 File Mmc.cpp, Line 16578
StartDAO : CD-Text - Off

8:55:43 PM #19 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Super Link -> ON

8:55:43 PM #20 Text 0 File Mmc.cpp, Line 16865
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4c 2e 10

8:55:47 PM #21 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

8:55:47 PM #22 Text 0 File Reader.cpp, Line 385
Exception value: -1

8:55:47 PM #23 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers

8:55:47 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 52x (7,800 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 1:06:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\d347prt.sys’: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 5:31:48 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any help would be much appreciated!


#2

sorry I couldn’t figure out how to put the logs as scrollable in-line attachments as I’ve seen some people do.


#3

Enable DMA/UDMA on all drives…


#4

why use Nero Vision to burn some JPEG’s? simply use Nero express and create a Data DVD or CD.


#5

Thanks RS2 for pointing me in the right direction. I ended up uninstalling my nvidia ide drivers and using the old microsoft ones, and the burn succeeded.
The only thing that concerns me now is having drivers from 2001. I can’t figure out how to get updates of the generic windows ide drivers. Are there even any?


#6

no real need to update the Windows IDE drivers at the moment.

to answer your question about scrolling in-line attachments…enter the log in between (code)(/code) (replace parentheses with proper brackets) tags like this

scroll me baby

#7

When I was trying to figure out some dma problems I went onto several forums looking for info on nvidia chip sets. many people said that the nvidia ide drivers can cause problems, to use generic windows drivers. One of my computers are running generic windows drivers from 2001 also and I havent had any problems. I have tried updating the drivers and windows xp comes up that thier are no newer drivers avalable so I think that is the newest.