Issue with LG GSA-H10N "Internal target failure"

Bear with me seeing I’m a noobie…

I have LG GSA H10N that I have flashed with the latest frimware.
When using Nero Vision (latest version) to convert avi to DVD I am getting the following error:

“Burn Failed please view log for further information.”

Log is as follows (cut’n paste from log where error appears - full log attached):


07:19:41] NeroVision 7:11:31 AM #22 Text 0 File Cdrdrv.cpp, Line 9096
[07:19:41] NeroVision ---- DVD Structure: Physical Format Information (00h) ----
[07:19:41] NeroVision Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
[07:19:41] NeroVision Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
[07:19:41] NeroVision Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
[07:19:41] NeroVision Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
[07:19:41] NeroVision Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
[07:19:41] NeroVision Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
[07:19:41] NeroVision End Physical Sector Number of Data Area: 26127F h
[07:19:41] NeroVision End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
[07:19:41] NeroVision Data in Burst Cutting Area (BCA) does not exist
[07:19:41] NeroVision Start sector number of the current Border-Out: 2FE10 h
[07:19:41] NeroVision Start sector number of the next Border-In: 2FFA0 h
[07:19:41] NeroVision Media Specific [16…63]:
[07:19:41] NeroVision 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0…
[07:19:41] NeroVision 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …þ…ÿ…
[07:19:41] NeroVision 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
[07:19:41] NeroVision
[07:19:41] NeroVision 7:13:33 AM #23 Text 0 File Cdrdrv.cpp, Line 1230
[07:19:41] NeroVision 07:13:33.484 - D: HL-DT-ST DVDRAM GSA-H10N : Queue again later
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #24 SPTI -1061 File SCSIPassThrough.cpp, Line 291
[07:19:41] NeroVision D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
[07:19:41] NeroVision Sense Key: 0x04 (KEY_HARDWARE_ERROR)
[07:19:41] NeroVision Sense Code: 0x44
[07:19:41] NeroVision Sense Qual: 0x86
[07:19:41] NeroVision CDB Data: 0x2A 00 00 15 BC 20 00 00 20 00 00 00
[07:19:41] NeroVision Sense Area: 0x70 00 04 00 00 00 00 10 32 24 04 0C 44 86
[07:19:41] NeroVision Buffer x02030000: Len x10000
[07:19:41] NeroVision 0x00 00 01 BA 45 01 A5 D4 B4 15 01 89 C3 F8 00 00
[07:19:41] NeroVision 0x01 E0 07 EC 80 00 00 06 40 B0 F3 4D 12 4E A4 A7
[07:19:41] NeroVision 0xA3 7E 03 58 7D 3C C8 0C 00 D8 34 AC 70 60 6E F8
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #25 CDR -1061 File Writer.cpp, Line 302
[07:19:41] NeroVision Internal target failure
[07:19:41] NeroVision D: HL-DT-ST DVDRAM GSA-H10N
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #26 Text 0 File ThreadedTransfer.cpp, Line 229
[07:19:41] NeroVision all writers idle, stopping conversion
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #27 Text 0 File ThreadedTransfer.cpp, Line 223
[07:19:41] NeroVision conversion idle, stopping reader
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #28 Text 0 File DVDR.cpp, Line 3337
[07:19:41] NeroVision EndDAO: Last written address was 1424415
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #29 CDR -1061 File WriterStatus.cpp, Line 167
[07:19:41] NeroVision Internal target failure
[07:19:41] NeroVision D: HL-DT-ST DVDRAM GSA-H10N
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
[07:19:41] NeroVision Could not perform end of Disc-at-once
[07:19:41] NeroVision
[07:19:41] NeroVision 7:19:40 AM #31 Phase 38 File APIProgress.cpp, Line 278
[07:19:41] NeroVision Burn process failed at 8x (11,080 KB/s)
[07:19:41] NeroVision
[07:19:41] NeroVision Existing drivers:
[07:19:41] NeroVision Registry Keys:
[07:19:41] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Please help… I have tried the burner in two machines with the same result.
By the way the burner is new and using Shintaro -R Media.

  1. ‘Shintaro -R Media’ never heard of it, try using good media like Verbatim.
  2. sound to me like a hardware problem. it would be very helpful it you could post a Nero log (not NeroVision). maybe use NeroVision to burn to an ISO file and try burning that with Nero and if you get the same problems post the Nero log.

Shintaro=crappy media typically sold in Australia. Please, try using better quality stuff like Verbatim of TY discs.

thanks guys …will use some due diligence in purchasing media next time.
Currently using 4x speed when burning and appears to be OK at this stage :slight_smile:

Swap the ide cable with a new one.