Ip4300 cd print function

Hello… I am trying to enable cd printing on the canon ip4300. I have went through the instructions but I just can’t see to get it. Should I be doing it quickly? Because I tried that and its not working. Any help will be great. Thanks.

The instructions found HERE are good, and should work. Some people find that they need to “help” the disc tray into the feed rollers, but since you don’t state what your problems are, it’s hard to say. I recommend getting your disc tray from “rungsamilathai” on Ebay, and it will also come with a CD of instructions. You want the “F” disc tray.

[quote=CDan;1985589]The instructions found HERE are good, and should work. .[/quote] I have put the tray - with a printable DVD - into the slot and the arrow > of the F-tray brought into a direct line of the correspondenting arrow < of the slot.

After printing I found a surface of the CD which was about 2 - 3 mm out off the centre.

Is there anyone who can interpret this error?:bow:

[QUOTE=lok_n;2029568]I have put the tray - with a printable DVD - into the slot and the arrow > of the F-tray brought into a direct line of the correspondenting arrow < of the slot.

After printing I found a surface of the CD which was about 2 - 3 mm out off the centre.

Is there anyone who can interpret this error?:bow:[/QUOTE]

Not sure what you’re describing. There a centering adjustment in the CD-LabelPrint software in the final print dialog. Your setting there will be remembered.

If you need to decrease the center diameter for the media you have, create a template for it with the “select paper” button. This will also be remembered.

Look here:
http://img111.imageshack.us/my.php?image=image1smallam2.jpg

that’s my problem.

[QUOTE=lok_n;2029976]Look here:
http://img111.imageshack.us/my.php?image=image1smallam2.jpg

that’s my problem.[/QUOTE]

Very simple to adjust, as already described.