Imgburn issues w/ dl dvd

Hello -

I have been trying to burn a few dvd’s with imgburn with no success. Have been doing hours of research but came to dead end. First I already switched from memorex brand to the verbatim’s. Installed the latest firmware for Lite on shw 160p6s. This is one of the logs from imgburn. The two previous attempts ended up erroring at 50 percent with same error.

Any ideas? I can burn a dvd R movie no problems.

I 15:14:52 ImgBurn Version 2.4.4.0 started!
I 15:14:52 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 15:14:52 Total Physical Memory: 2,096,492 KB - Available: 1,534,384 KB
I 15:14:52 Initialising SPTI…
I 15:14:52 Searching for SCSI / ATAPI devices…
I 15:15:14 Found 1 DVD±RW!
I 15:19:31 Operation Started!
I 15:19:31 Source File: C:\Documents and Settings\Phillip\Desktop\xxx-ufc.dvd
I 15:19:31 Source File Sectors: 3,827,488 (MODE1/2048)
I 15:19:31 Source File Size: 7,838,695,424 bytes
I 15:19:31 Source File Volume Identifier: DVD_ROM
I 15:19:31 Source File Volume Set Identifier: 356fc000MS UDFBridge
I 15:19:31 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:19:31 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:19:31 Source File File System(s): ISO9660, UDF (1.50)
I 15:19:31 Destination Device: [0:1:0] LITE-ON DVDRW SHW-160P6S PS0C (D:) (ATA)
I 15:19:31 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)
I 15:19:31 Destination Media Sectors: 4,173,824
I 15:19:31 Write Mode: DVD
I 15:19:31 Write Type: DAO
I 15:19:31 Write Speed: 4x
I 15:19:31 Link Size: Auto
I 15:19:31 Lock Volume: Yes
I 15:19:31 Test Mode: No
I 15:19:31 OPC: No
I 15:19:31 BURN-Proof: Enabled
I 15:19:31 Book Type Setting: DVD-ROM
I 15:19:31 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 15:19:31 User Specified L0 Data Zone Capacity: 1,913,760
E 15:19:44 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
E 15:19:44 Operation Failed! - Duration: 00:00:13
I 15:19:44 Average Write Rate: N/A - Maximum Write Rate: N/A

Forgot to add:

DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes

Physical Format Information (ADIP):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Performance (Write Speed):
Descriptor 1…
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 0 (0x00000000)
-> RS: 0 KB/s (0x) - WS: 0 KB/s (0x)
Descriptor 2…
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 0 (0x00000000)
-> RS: 4,432 KB/s (3.3x) - WS: 3,324 KB/s (2.4x)

Where are the verbatims made?

I assume you’ve tried setting the write speed to 2.4x?

If you drive won’t burn them at either of the supported speeds (2.4x and 4x) and they’re the good ones from Singapore, try cleaning your drive.

If that fails, buy a new one. (If it can’t burn the best DL media available, what use is it?!)

[QUOTE=qball33;2277774]
I 15:19:31 Source File: C:\Documents and Settings\Phillip\Desktop[B]xxx-ufc.dvd[/B]
[/QUOTE]

Start buying originals instead of downloading and using illegal obtained material, what this is…

E 15:19:44 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

this is ur problem. google it.

Start buying originals instead of downloading and using illegal obtained material, what this is…

and u always buy originals i guess, u must be rich.

@Rothi
There is no need to argue. The rules of this forum are very clear.
As Da_Taxman would say: [I]Respect CDFreaks by respecting our rules[/I].

I just bought a DVD-DL game recently (a while ago actually), and I don’t want to overuse the disc. Would I need to [B]install an addon[/B] to imgBurn to be able to make a backup copy of the disc? Or can it [B]do that natively[/B]?

My other burning software can only burn up to [B]half of the 1st layer[/B]. With no background programs running. And I have [B]2 GiB RAM, on Windows 7. I’m using Optiarc AD-7561S, and burned at 2.4x[/B].

Thanks!

[QUOTE=shift015;2306339]I just bought a DVD-DL game recently (a while ago actually), and I don’t want to overuse the disc. Would I need to [B]install an addon[/B] to imgBurn to be able to make a backup copy of the disc? Or can it [B]do that natively[/B]?

My other burning software can only burn up to [B]half of the 1st layer[/B]. With no background programs running. And I have [B]2 GiB RAM, on Windows 7. I’m using Optiarc AD-7561S, and burned at 2.4x[/B].

Thanks![/QUOTE]

Games on DVD usually have a copy protection, so you cannot use Imgburn to copy it…

[QUOTE=chef;2279395]Start buying originals instead of downloading and using illegal obtained material, what this is…[/QUOTE]

I have the same problem with Verbatim DL discs with legal material at all supported speed and it is not related to writer program at all. My writer is an LG H60 upgraded to H66.

[QUOTE=artifex;2408739]I have the same problem with Verbatim DL discs with legal material at all supported speed and it is not related to writer program at all. My writer is an LG H60 upgraded to H66.[/QUOTE]

And? Your post is kinda useless without any useful info like a logfile!

[QUOTE=chef;2409303]And? Your post is kinda useless without any useful info like a logfile![/QUOTE]

You point to illegal material as a source of evil and this error have no connection to that at all. This is what my notice for.

Because it’s happened in the past I have no logfile at hand sorry.

[QUOTE=artifex;2409377]You point to illegal material as a source of evil and this error have no connection to that at all. This is what my notice for.

Because it’s happened in the past I have no logfile at hand sorry.[/QUOTE]

  1. Look closely at post #1. Read also the post made by the moderator!!!

  2. Then don’t hijack another thread…