i’ve been using imgburn for some time now im using 18.104.22.168 now and i have my burn speed set to write at 4 but it only writes at 2 i’ve checked dma and its on. i have a liton DH-20ayp-08c. anyone have any problems
Might be that the combination of media and firmware doesn’t support speeds above 2x. DMA might still be in PIO mode even if Windows tells you it isn’t. Posting an ImgBurn log file would help. Old logs can be retrieved from the Help menu in the program.
I 19:03:10 ImgBurn Version 22.214.171.124 started!
I 19:03:10 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)
I 19:03:10 Total Physical Memory: 622,068 KB - Available: 310,060 KB
I 19:03:10 Initialising SPTI…
I 19:03:10 Searching for SCSI / ATAPI devices…
I 19:03:10 Found 1 DVDÂ±RW and 1 DVDÂ±RW/RAM!
I 20:00:41 Operation Started!
I 20:00:41 Source File: F:\ELLA_ENCHANTED.ISO
I 20:00:41 Source File Sectors: 2,058,584 (MODE1/2048)
I 20:00:41 Source File Size: 4,215,980,032 bytes
I 20:00:41 Source File Volume Identifier: ELLA_ENCHANTED
I 20:00:41 Source File Volume Set Identifier: 00B8CA46DVDSHRNK
I 20:00:41 Source File Implementation Identifier: DVD Shrink
I 20:00:41 Source File File System(s): ISO9660, UDF (1.02)
I 20:00:41 Destination Device: [1:0:0] ATAPI DVD A DH20A4P 9P53 (D:) (ATA)
I 20:00:41 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x, 18x)
I 20:00:41 Destination Media Sectors: 2,297,888
I 20:00:41 Write Mode: DVD
I 20:00:41 Write Type: DAO
I 20:00:41 Write Speed: 6x
I 20:00:41 Link Size: Auto
I 20:00:41 Test Mode: No
I 20:00:41 OPC: Yes
I 20:00:41 BURN-Proof: Enabled
I 20:00:41 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 20:01:11 Filling Buffer… (20 MB)
I 20:01:13 Writing LeadIn…
I 20:01:32 Writing Session 1 of 1… (1 Track, LBA: 0 - 2058583)
I 20:01:32 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 2058583)
I 20:23:21 Synchronising Cache…
I 20:23:41 Image MD5: 824d9d88042166768cc83649a3a54d9c
I 20:23:41 Operation Successfully Completed! - Duration: 00:23:00
I 20:23:41 Average Write Rate: 3,147 KB/s (2.3x) - Maximum Write Rate: 3,391 KB/s (2.4x)
I 20:43:39 Close Request Acknowledged
I 20:43:39 Closing Down…
I 20:43:40 Shutting down SPTI…
I 20:43:40 ImgBurn closed!
I’d check your DMA in the BIOS. If still no good, uninstall the controllers and reboot.
i checked my dma it was alright . i had to uninstall imgburn then reinstall it now it is working thanks to all. everyone here are very helpfull. it started acting funny after i installed sp3 i wounder if that had something to do with my problem? thanks again, phil