Illegal Disk

Hello everyone; am a newbie in all of this I’ve develop a problem burning dvd’s with nero also tried with MagicISO it goes thru its motion but at the end the disk is blank; sonic deluxe gives an error similar to nero I flashed the dvd burner from v2.81 to 2.25 that did not help here is the Nero log please help::a

===============NERO v8 log==========================
Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4

Recorder: <_NEC DVD±RW ND-6500A> Version: 2.25 - HA 1 TA 3 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <MagicISO Virtual DVD-ROM >Version: 1.0A - HA 1 TA 1 - 8.1.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD±RW ND-6500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
MagicISO Virtual DVD-ROM F: CdRom1
_NEC DVD±RW ND-6500A D: CdRom3

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1918MB (1964528kB)
Free physical memory: 1398MB (1431804kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.12.2007
Burn DVD Image
4:10:19 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

4:10:20 PM #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

4:10:21 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3680816 (817:57.41, 7189MB)

4:10:21 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: DVD)

4:10:21 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD±RW ND-6500A, Media type: DVD+R DL

4:10:21 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:10:21 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 3680817 (3680817) = #3680817/817:57.42
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3680817 blocks [D: _NEC DVD±RW ND-6500A]
--------------------------------------------------------------

4:10:21 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [D: _NEC DVD±RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7538313216, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3680817 | 3680817 | 0x00
3680817 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

4:10:21 PM #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

4:10:21 PM #10 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

4:10:21 PM #11 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

4:10:21 PM #12 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

4:10:21 PM #13 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

4:10:21 PM #14 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 8x (11,080 KB/s)

4:10:22 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:10:22 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 495
Disc finalized, LBA total Image size: 3680817 (7189MB), Last LBA L0: 1840415 (3594MB)

4:10:22 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 660
L0 Data Zone Capacity set to 1840416 (1C1520h, 3594MB) -> OK, confirmed setting

4:10:22 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 687
Burning Layer 1

4:10:22 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 697
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

4:10:22 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x07740180: Len x804

4:10:22 PM #21 Text 0 File DVDR.cpp, Line 6748
Drive: _NEC DVD±RW ND-6500A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

4:10:22 PM #22 CDR -1207 File DVDR.cpp, Line 6452
Book Type automatically set to: DVD-ROM

4:10:22 PM #23 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

4:10:22 PM #24 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

4:10:23 PM #25 SPTI -1046 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x07920040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

4:10:23 PM #26 CDR -1046 File Writer.cpp, Line 306
Illegal disc
D: _NEC DVD±RW ND-6500A

4:10:24 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

4:10:24 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

4:10:24 PM #29 Phase 127 File dlgbrnst.cpp, Line 1764
Generating DVD high compatibility borders

4:10:24 PM #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

4:10:24 PM #31 Text 0 File DVDR.cpp, Line 6748
Drive: _NEC DVD±RW ND-6500A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

4:10:24 PM #32 CDR -1046 File WriterStatus.cpp, Line 162
Illegal disc
D: _NEC DVD±RW ND-6500A

4:10:24 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

4:10:24 PM #34 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 8x (11,080 KB/s)

4:10:24 PM #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:10:26 PM #36 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

4:10:26 PM #37 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Welcome to the forum.
Turning DMA on, this listed in your log below might just do the trick:

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD±RW ND-6500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off

Thanks for your response; but that DMA is for a virtual drive that magicISO created I can burn CD’s but no matter what I cannot burn DVD’s off any kind I keep getting an “[B]illegal disk could not access Disk_at_once”[/B] any help would be appreciated. (short of reformating my HD):sad::a