Illegal disc problems with sony DRU-820A

vbimport

#1

hi guys. I purchased a sony DVD burner (DRU-820A) a few years back. of late i have not been able to burn any DVD’s at all as nero stops the burning process mid-way due to an illegal disc error. this problem cropped up last week. I thought it might be a firmware problem, so i upgraded it to 1.0c. Even after the upgrade,the problem persists. I have even tried burning with ver7 and ver8 of nero. Nothing seems to work. Any help in this regard will be much appreciated. I am attaching the contents of the log file below. none none Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 Recorder: <SONY DVD RW DRU-820A> Version: 1.0c - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SONY DVD RW DRU-820A >Version: 1.0c - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW DRU-820A I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte BUFE : 0 Physical memory : 383MB (392688kB) Free physical memory: 133MB (136808kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.5.2008 UDF compilation 6:24:34 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:24:35 PM #2 Text 0 File Isodoc.cpp, Line 6527 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 6:24:35 PM #3 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using DVD media 6:24:36 PM #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2181631 (484:48.31, 4260MB) 6:24:36 PM #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 6:24:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: SONY DVD RW DRU-820A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 6:24:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:24:36 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2181632 (2181632) = #2181632/484:48.32 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181632 blocks [I: SONY DVD RW DRU-820A] -------------------------------------------------------------- 6:24:36 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [I: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO DAO infos: ========== MCN: “” TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4467982336, ISRC “” DAO layout: =========== __Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2181632 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2181632 | 0 | 0x00 2181632 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:24:36 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:24:36 PM #11 Phase 24 File dlgbrnst.cpp, Line 1760 Caching of files started 6:24:36 PM #12 Text 0 File Burncd.cpp, Line 4298 Cache writing successful. 6:24:36 PM #13 Phase 25 File dlgbrnst.cpp, Line 1760 Caching of files completed 6:24:36 PM #14 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 8x (11,080 KB/s) 6:24:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:24:36 PM #16 Text 0 File DVDR.cpp, Line 3070 Recording mode: Sequential Recording Mode for Multisession 6:24:36 PM #17 Text 0 File DVDR.cpp, Line 3226 Start write address at LBA 0 DVD high compatibility mode: Yes 6:24:36 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x085d1840: Len x648 6:24:36 PM #19 Text 0 File Cdrdrv.cpp, Line 9288 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16…63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0… 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 … 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 … 6:25:45 PM #20 SPTI -1093 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 90 00 02 Buffer x08960040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6:25:45 PM #21 CDR -1093 File Writer.cpp, Line 301 No seek complete I: SONY DVD RW DRU-820A 6:25:46 PM #22 Text 0 File DVDR.cpp, Line 3446 EndDAO: Last written address was -1 6:25:46 PM #23 Phase 133 File dlgbrnst.cpp, Line 1760 Writing short lead-out 6:25:51 PM #24 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x52 01 00 00 00 01 00 00 24 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05 Buffer x06b4a680: Len x24 6:25:51 PM #25 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x52 01 00 00 00 02 00 00 24 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05 Buffer x06b4a680: Len x24 6:25:51 PM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 6:25:51 PM #27 CDR -1046 File WriterStatus.cpp, Line 162 Illegal disc I: SONY DVD RW DRU-820A 6:25:51 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 6:25:57 PM #29 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 8x (11,080 KB/s) 6:25:58 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:26:01 PM #31 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 6:26:01 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

You expect help from that ugly & unformatted post??

[QUOTE=sith_lord;2068799]hi guys. I purchased a sony DVD burner (DRU-820A) a few years back. of late i have not been able to burn any DVD’s at all as nero stops the burning process mid-way due to an illegal disc error. this problem cropped up last week. I thought it might be a firmware problem, so i upgraded it to 1.0c. Even after the upgrade,the problem persists. I have even tried burning with ver7 and ver8 of nero. Nothing seems to work. Any help in this regard will be much appreciated. I am attaching the contents of the log file below. none none Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 Recorder: <SONY DVD RW DRU-820A> Version: 1.0c - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SONY DVD RW DRU-820A >Version: 1.0c - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW DRU-820A I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte BUFE : 0 Physical memory : 383MB (392688kB) Free physical memory: 133MB (136808kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.5.2008 UDF compilation 6:24:34 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:24:35 PM #2 Text 0 File Isodoc.cpp, Line 6527 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE [B]Multisession : TRUE Multisession type: : Start multisession[/B] Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 6:24:35 PM #3 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using DVD media 6:24:36 PM #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2181631 (484:48.31, 4260MB) 6:24:36 PM #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 6:24:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: SONY DVD RW DRU-820A, Media type: DVD-R Disc Manufacturer: [B]CMC MA - G. AE1[/B] Disc Application Code: 64, Disc Physical Code: 193 6:24:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:24:36 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2181632 (2181632) = #2181632/484:48.32 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181632 blocks [I: SONY DVD RW DRU-820A] -------------------------------------------------------------- 6:24:36 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [I: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO DAO infos: ========== MCN: “” TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4467982336, ISRC “” DAO layout: =========== __Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2181632 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2181632 | 0 | 0x00 2181632 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:24:36 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:24:36 PM #11 Phase 24 File dlgbrnst.cpp, Line 1760 Caching of files started 6:24:36 PM #12 Text 0 File Burncd.cpp, Line 4298 Cache writing successful. 6:24:36 PM #13 Phase 25 File dlgbrnst.cpp, Line 1760 Caching of files completed 6:24:36 PM #14 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 8x (11,080 KB/s) 6:24:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:24:36 PM #16 Text 0 File DVDR.cpp, Line 3070 Recording mode: Sequential Recording Mode for Multisession 6:24:36 PM #17 Text 0 File DVDR.cpp, Line 3226 Start write address at LBA 0 DVD high compatibility mode: Yes 6:24:36 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x085d1840: Len x648 6:24:36 PM #19 Text 0 File Cdrdrv.cpp, Line 9288 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16…63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0… 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 … 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 … 6:25:45 PM #20 SPTI -1093 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) [B]Sense Key: 0x03 (KEY_MEDIUM_ERROR)[/B] Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 90 00 02 Buffer x08960040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6:25:45 PM #21 CDR -1093 File Writer.cpp, Line 301 No seek complete I: SONY DVD RW DRU-820A 6:25:46 PM #22 Text 0 File DVDR.cpp, Line 3446 EndDAO: Last written address was -1 6:25:46 PM #23 Phase 133 File dlgbrnst.cpp, Line 1760 Writing short lead-out 6:25:51 PM #24 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x52 01 00 00 00 01 00 00 24 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05 Buffer x06b4a680: Len x24 6:25:51 PM #25 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x52 01 00 00 00 02 00 00 24 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05 Buffer x06b4a680: Len x24 6:25:51 PM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 6:25:51 PM #27 CDR -1046 File WriterStatus.cpp, Line 162 Illegal disc I: SONY DVD RW DRU-820A 6:25:51 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 6:25:57 PM #29 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 8x (11,080 KB/s) 6:25:58 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:26:01 PM #31 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 6:26:01 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)[/QUOTE]

crap in - crap out!