Illegal CD

Hey all…i did do searches before deciding to post this, and found a few posts with the same problem…but me not knowing much bout computers(software wise) i decided to post this. Basically when I go to burn a DVD I get the “Illegal Disc” error 1% into it. Here is the log below…a STEP BY STEP soultion would be apperciated.

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero version: 6.0.0.11
Recorder: <DVDRW IDE1004> Version: 0039 - HA 1 TA 0 - 6.0.0.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1004 >Version: 0039 - HA 1 TA 0 - 6.0.0.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 DMA: On

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 186MB (190788kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.8.2006
UDF/ISO compilation
3:18:52 PM #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

3:18:52 PM #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

3:18:52 PM #3 Text 0 File Isodoc.cpp, Line 5771
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

3:18:52 PM #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

3:18:52 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

3:18:52 PM #6 Text 0 File Writer.cpp, Line 127
Writer DVDRW IDE1004 running

3:18:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

3:18:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

3:18:52 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

3:18:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2247664 (499:28.64)

3:18:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

3:18:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: DVDRW IDE1004, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

3:18:53 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2247664 (2247664) = #2247664/499:28.64
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2247664 blocks [DVDRW IDE1004 ]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #0 + 1 (1) = #1/0:0.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------

3:18:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [DVDRW IDE1004 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4603523072, ISRC “”
2: TRM_DATA_MODE1, 2048/0x00, FilePos 4603523072 4603523072 4603525120, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2247664 | 2 | 0 | 0x00 | 0x41
2247664 | 2 | 1 | 0x00 | 0x41
2247665 | lead-out | 1 | 0x00 | 0x41

3:18:53 PM #15 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

3:18:53 PM #16 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

3:18:53 PM #17 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 2.4x (3,312 KB/s)

3:18:53 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:18:53 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:18:53 PM #20 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 52 49 43 4F 48 4A - 50 4E 57 31 31 01 39 23 …RICOHJPNW11.9#
00 8A 86 68 02 26 00 8A - 86 70 02 28 00 8A 86 6A …h.&…p.(…j
02 28 22 12 10 E0 00 F0 - 00 00 00 00 00 00 00 01 .("…

3:18:53 PM #21 Phase 98 File dlgbrnst.cpp, Line 1843
Start formatting disc before burning

3:18:53 PM #22 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 23:30,544 (1410544ms) -> OK

3:18:59 PM #23 Phase 100 File dlgbrnst.cpp, Line 1843
Formatting disc was successful

3:18:59 PM #24 Phase 65 File dlgbrnst.cpp, Line 1843
Burn process started

3:18:59 PM #25 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

3:19:05 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07780000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06

3:19:05 PM #27 CDR -1046 File Writer.cpp, Line 335
Illegal disc

3:19:05 PM #28 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

3:19:05 PM #29 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

3:19:05 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

3:19:05 PM #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

3:19:05 PM #32 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 2.4x (3,312 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 2:16:24 PM
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  • First of all your nero is way too old (6.0.0.11). You must update to the latest nero 6.6.1.4!!!
  • Second one of your burner (I believe it is an emprex or a BTC 1004 which is one of the worst DVD burner ever) shows that DMA is off!!! You must turn it on !!!
  • Third I have the feeling you are trying to burn a protected movie ??? so I am not going any further!!

I just checked both my IDE controllers and it is set to 'DMA if avaible" And it is not a protected movie, the file WAS an avi of a bootleg concert I shot which i turned into a VOB file(s) so I could burn it.

This is from your log:
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 [B]DMA: Off[/B]
CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 DMA: On

You said DMA is set to “DMA if available”, what does it say just bellow (active transfert mode)??
PIO ?, Multiword ? … it should show Ultra DMA 2 or 4 according to your drive.

Also what brand of re-writable DVD media are you using?

My primary IDE driver says “Ultra DMA mode 4” and my Secondary says “PIO Mode” both won’t let me change them. If by medium name you mean brnad name(if you don’t im sorry) it’s Memorex.

One issue I just thought of is, could my burner be a DVD - burner? If so that would explain why it will not write to a DVD + disc. How do I check it?

Nero info tool will tell you what you have
(oh yeah…UPGRADE your Nero!)

To enable DMA:

*Right click My Computer/properties/Hardware/Device Manager
*Bowse to IDE ATA/ATAPI controllers that is set to PIO mode.
*Right click and uninstall
*Reboot PC, XP will find the correct drivers and reinstall them in DMA mode.

Disc Manufacturer ID: RICOHJPN

Memorex are bad, but you got lucky with these.

Burn process started at 2.4x (3,312 KB/s)

Burning a tad slow, increase to at least 4X.

File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 2:16:24 PM

This is Roxio’s driver, it is known to create conflicts with other burning apps, especially Nero…I suggest removing it in it’s entirety via this clean tool:

I’ll enable the DMA that way, as for using a higher speed, it does not go up to 4x.

turned DMA on, heres new log

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero version: 6.0.0.11 (Nero Express)
Recorder: <DVDRW IDE1004> Version: 0039 - HA 1 TA 0 - 6.0.0.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1004 >Version: 0039 - HA 1 TA 0 - 6.0.0.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 DMA: On

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 170MB (174308kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.9.2006
UDF/ISO compilation
9:49:02 PM #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

9:49:02 PM #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

9:49:02 PM #3 Text 0 File Isodoc.cpp, Line 5771
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

9:49:02 PM #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

9:49:02 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

9:49:02 PM #6 Text 0 File Writer.cpp, Line 127
Writer DVDRW IDE1004 running

9:49:02 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:49:02 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

9:49:02 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

9:49:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2247664 (499:28.64)

9:49:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

9:49:03 PM #12 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: DVDRW IDE1004, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

9:49:03 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2247664 (2247664) = #2247664/499:28.64
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2247664 blocks [DVDRW IDE1004 ]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #0 + 1 (1) = #1/0:0.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------

9:49:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [DVDRW IDE1004 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4603523072, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 4603523072 4603523072 4603525120, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2247664 | 2 | 0 | 0x00 | 0x41
2247664 | 2 | 1 | 0x00 | 0x41
2247665 | lead-out | 1 | 0x00 | 0x41

9:49:03 PM #15 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

9:49:03 PM #16 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

9:49:03 PM #17 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 2.4x (3,312 KB/s)

9:49:03 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:49:03 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:49:03 PM #20 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 52 49 43 4F 48 4A - 50 4E 57 31 31 01 39 23 …RICOHJPNW11.9#
00 8A 86 68 02 26 00 8A - 86 70 02 28 00 8A 86 6A …h.&…p.(…j
02 28 22 12 10 E0 00 F0 - 00 00 00 00 00 00 00 01 .("…

9:49:03 PM #21 Phase 98 File dlgbrnst.cpp, Line 1843
Start formatting disc before burning

9:49:03 PM #22 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 23:30,544 (1410544ms) -> OK

9:49:09 PM #23 Phase 100 File dlgbrnst.cpp, Line 1843
Formatting disc was successful

9:49:09 PM #24 Phase 65 File dlgbrnst.cpp, Line 1843
Burn process started

9:49:09 PM #25 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: Yes

9:49:15 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03EB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06

9:49:15 PM #27 CDR -1046 File Writer.cpp, Line 335
Illegal disc

9:49:15 PM #28 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

9:49:15 PM #29 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

9:49:15 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

9:49:15 PM #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

9:49:15 PM #32 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 2.4x (3,312 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 2:16:24 PM
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

As it was said before…

You need to U-P-D-A-T-E the N-E-R-O Software!!!

You NEED v6.6.1.4. You have v6.0.0.11. That is your problem.

You want to fix your problem??? Go and get the update for NERO!

Also, you may need to update the firmware of your writer to fully recognise the media you are using.

DVDRW IDE1004

It has also been suggested that these are some of the dodgiest drives around, may be time for a new one…especially if you can’t burn over 2.4X

Also noticed that you still have Roxio installed.

Zanev,
5 days ago :rolleyes: , I asked you tu update your nero!!!
Nero 6.0.0.11 is one of the first release. It was full of bugs (just like all new nero release). Give yourself a chance, update to the latest (the update is free) nero.
I am not saying everything will be fine … you still have your BTC 1004!!! But is should be better.
The latest firmware for your BTC should be 049 (guys correct me if I am wrong).

And yes … your 1004 is able to burn +/-R mediums.

Needed till the weekend to update…I did, differnt error… “write error”

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <DVDRW IDE1004> Version: 0039 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDRW IDE1004 >Version: 0039 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
DVDRW IDE1004 E: CDRom0
CyberDrv CW088D CD-R/RW F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 171MB (176124kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.9.2006
UDF/ISO compilation
5:12:37 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started

5:12:37 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)

5:12:37 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

5:12:37 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted

5:12:37 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

5:12:37 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

5:12:37 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: DVDRW IDE1004 running

5:12:37 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

5:12:37 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

5:12:37 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

5:13:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2247663 (499:28.63, 4389MB)

5:13:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

5:13:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: DVDRW IDE1004, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

5:13:06 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

5:13:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2247664 (2247664) = #2247664/499:28.64
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2247664 blocks [E: DVDRW IDE1004]
--------------------------------------------------------------

5:13:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: DVDRW IDE1004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4603215872, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2247664 | lead-out | 1 | 0x41 | 0x00

5:13:06 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:13:06 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

5:13:06 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

5:13:06 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

5:13:06 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 1x (1,385 KB/s)

5:13:07 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0457d000: Len x4000

5:13:07 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:13:07 PM #24 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16…63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 …RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #…h.&…p.(…
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("…

5:13:07 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x95 00 00 00 00 00 00 00 00 00 00 44
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x044f6000: Len x4

5:13:07 PM #26 Phase 98 File dlgbrnst.cpp, Line 1725
Start formatting disc before burning

5:13:47 PM #27 Phase 100 File dlgbrnst.cpp, Line 1725
Formatting disc was successful

5:13:47 PM #28 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

5:16:26 PM #29 SPTI -1135 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 7A 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04ef0000: Len x10000
0x00 00 01 BA 44 1E AF 0D B6 03 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 1A 80 09 80 40 01 88 68 02
0x1E 06 40 74 9E 03 C0 C2 90 57 01 BA 85 0D 03 71

5:16:26 PM #30 CDR -1135 File Writer.cpp, Line 302
Write error
E: DVDRW IDE1004

5:16:27 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:16:27 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

5:16:28 PM #33 Text 0 File DVDPlusRW.cpp, Line 893
Media-Format will be stopped after burning

5:16:28 PM #34 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders

5:16:28 PM #35 SPTI -1023 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 80
Buffer x0388c200: Len x20

5:16:28 PM #36 SPTI -1023 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 80
Buffer x0388c800: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

5:16:28 PM #37 SPTI -1169 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x95 00 00 00 00 00 00 00 00 00 00 44
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80
Buffer x044f6000: Len x4

5:16:28 PM #38 CDR -1023 File WriterStatus.cpp, Line 167
Command sequence error
E: DVDRW IDE1004

5:16:28 PM #39 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

5:16:28 PM #40 SPTI -1023 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 80
Buffer x0388c800: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

5:16:29 PM #41 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 1x (1,385 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 2:16:24 PM
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

:a :a :a :bow: :frowning: :sad: :doh: :eek: :disagree:
You did not update to the latest Nero 6 !!! You have switched to … one of the [B]first[/B] version of nero 7!!! Which was also full of bugs …
Keep your nero 6 and update to the latest …

BTW:[B]your DMA is still off !!![/B]

It says the DMA is on…and would 6.6.014 be ok?

Nero 6.6.1.4 is fine, that is the latest version of Nero 6. Before installing clean your system from traces of Nero 7. You will be able to find the cleaning tool on the Nero homepage. Furthermore you should clean your system from all traces of Roxio. A link to that cleaning tool was given by LOCOENG earlier within this threat. After cleaning your system you can install nero 6.6.1.4.
Also try to get the latest firmware for your burner.

Just did everything you said, i got rid of nero 7, and ran the roxio removal. I even then uninstalled nero 6 and reinstalled with the patch at the site…now I’m getting "Could Not Perform Start of Disc-At-Once " when I try to burn.

indows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
[B]Nero Version: 6.6.1.4[/B]
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <DVDRW IDE1004> Version: 0039 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDRW IDE1004 >Version: 0039 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 [B]DMA: On [/B]
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 [B]DMA: On [/B]
CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 [B]DMA: On [/B] CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 [B]DMA: On [/B]

=== CDRom-Device-Map ===
DVDRW IDE1004 E: CDRom0
CyberDrv CW088D CD-R/RW F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 225MB (231196kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.9.2006
UDF/ISO compilation
4:11:41 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

4:11:41 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

4:11:41 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

4:11:41 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

4:11:41 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

4:11:41 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

4:11:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:11:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:11:42 PM #9 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

4:11:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2247663 (499:28.63, 4389MB)

4:11:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

4:11:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: DVDRW IDE1004, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

4:11:42 PM #13 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:11:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2247664 (2247664) = #2247664/499:28.64
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2247664 blocks [DVDRW IDE1004]
--------------------------------------------------------------

4:11:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [DVDRW IDE1004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4603215872, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2247664 | lead-out | 1 | 0x41 | 0x00

4:11:42 PM #16 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:11:42 PM #17 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:11:42 PM #18 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

4:11:42 PM #19 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

4:11:42 PM #20 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

4:11:42 PM #21 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 1x (1,385 KB/s)

4:11:42 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x02d97a00: Len x4000

4:11:42 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:11:42 PM #24 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16…63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 …RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #…h.&…p.(…
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("…

4:11:42 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x95 00 00 00 00 00 00 00 00 00 00 44
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x02d97400: Len x4

4:11:42 PM #26 Phase 98 File dlgbrnst.cpp, Line 1685
Start formatting disc before burning

4:11:47 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C

4:11:47 PM #28 Phase 101 File dlgbrnst.cpp, Line 1685
Formatting disc failed

4:11:47 PM #29 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

4:11:47 PM #30 CDR -1135 File ThreadedTransferInterface.cpp, Line 1799
Write error
E: DVDRW IDE1004

4:11:47 PM #31 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once

4:11:47 PM #32 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 1x (1,385 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Are you trying to autoburn from DVD Shrink? If so you won’t be able to do it with the version of Nero you are using…anything past 6.6.0.18 doesn’t support that function.

I used DVD Shrink to make the VOB files, but I am manually using nero (actully loading nero) to burn.

Just to see if it is nero or … something else:
download and install “imgburn”, save your shrinked movie (with DVDshrink) on your HDD as an image file, burn it with imgburn.