iHas124b Blinking Light

JakeHummel 2011-12-15 13:14:30 UTC #1

I recently purchased an iHas124b to flash with the Burner Max firmware. I guess I did a bad flash because the green LED on the drive blinks once every 2-3 seconds. I have original AL0S firmware and EEPROM, but after reflashing and rewriting the EEPROM, i'm still getting the blinking green light. The drive is recognized in Windows 7, but it cant recognize if there is a disc in or not. Please help!

mciahel 2011-12-16 12:23:43 UTC #2

Hi and Welcome!

see if this helps: http://club.myce.com/f44/how-do-i-crossflash-lite-ihas-124b-ihas-624b-324255/

Michael

JakeHummel 2011-12-16 15:32:25 UTC #3

I tried that, and i get “The Checksum is Invalid!” And I tried to repair the checksum, but it says that it can’t be repaired by this utility.

cvs 2011-12-16 15:47:55 UTC #4

[QUOTE=JakeHummel;2615733]I tried that, and i get “The Checksum is Invalid!” And I tried to repair the checksum, but it says that it can’t be repaired by this utility.[/QUOTE]

Try the 24x B series recovery flasher from the first post in this thread: http://club.myce.com/f44/new-liteon-plds-patched-firmware-thread-new-267641/

JakeHummel 2011-12-18 17:15:42 UTC #5

Tried it, still the same blinking light.

cvs 2011-12-19 10:52:23 UTC #6

[QUOTE=JakeHummel;2615941]Tried it, still the same blinking light.[/QUOTE]

Is the EEPROM Utility still not working even after you used the recovery flasher?

JakeHummel 2011-12-19 16:48:33 UTC #7

Yes, but I returned the drive to the original seller. Hopefully, this wont happen with the second drive. Thanks for the replies anyway.