I was trying to update a LH-16A1S to a 20A4 and didn’t have success. I decided I would start over and return to original eeprom and firmware and flash to 20A1S. I restored eeprom with original(non-tampered) and then used the flash utility to upload the original(non-tampered) firmware. I rebooted and my drive’s led is blinking. My computer recognized the drive fine and I am still able to open and close the tray. I can even get it to flash with stock Lite-On firmware. But it’s still blinking. Somebody help…
I fixed it after some studying(using the search feature) I noticed I had two different eeprom backups and I had been using the wrong one. All is well!!!