I don´t know what happened

vbimport

#1

I have one PC with 2 XP SP2 installed, Nero 6 ultraedition installed in both, and in one I have installed anyDVD and CloneDVD2 2.9.0.1, all works perfectly, but yesterday when I tried to burn a movie CloneDVD send me an error that the system was contaminated, I had to reinstall cloneDVD and make a virus scan I reinstall CloneDVD and I put the new version 2.9.0.3 but after I did it, I can´t burn DVDs all the process make perfectly but then It begins to burn and send me an error of bad media I lost 5 DVDs trying to know what happened, I think maybe the dvd writer (sony dwq120A) could be the problem I run the tests but is OK, I can burn CD with the Nero, but even in Nero I can´t burn DVD it told me that is an illegal disc. If I swap to the other XP in the same machine I can burn DVD without any problem. What happen? thanks


#2

Hi Welcome to CDF!!

Can you post the error log. This will provide more info regarding ur burn failure.


#3

there is the error log on Nero 6.6.1.4

jorge peña

1a2508067130128196703469

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Archivos de programa\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 p.m.

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder: <SONY DVD RW DW-Q120A> Version: PYS1 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L160M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q120A PYS1 iteatapi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B E: CDRom1
SONY DVD RW DW-Q120A F: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096300kB)
Free physical memory: 1396MB (1429736kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.1.2007
DVD-Copy on the fly
11:16:21 a.m. #1 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

11:16:21 a.m. #2 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)

11:16:22 a.m. #3 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:16:22 a.m. #4 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:16:22 a.m. #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

11:16:22 a.m. #6 Text 0 File Reader.cpp, Line 124
Reader running

11:16:22 a.m. #7 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-Q120A running

11:16:22 a.m. #8 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1985936 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

11:16:22 a.m. #9 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 1985936 = 1985936, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

11:16:22 a.m. #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

11:16:22 a.m. #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1985935 (441:19.10, 3878MB)

11:16:22 a.m. #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

11:16:22 a.m. #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DW-Q120A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR016
Disc Application Code: 64, Disc Physical Code: 193

11:16:22 a.m. #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:16:22 a.m. #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1985936 (1985936) = #1985936/441:19.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1985936 blocks [SONY DVD RW DW-Q120A]
--------------------------------------------------------------

11:16:22 a.m. #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [SONY DVD RW DW-Q120A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4067196928, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1985936 | lead-out | 1 | 0x41 | 0x00

11:16:22 a.m. #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:16:22 a.m. #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:16:22 a.m. #19 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)

11:16:22 a.m. #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:16:22 a.m. #21 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

11:16:22 a.m. #22 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

11:16:22 a.m. #23 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

11:18:08 a.m. #24 Text 0 File Cdrdrv.cpp, Line 1200
11:18:08.968 - F: SONY DVD RW DW-Q120A : Queue again later

11:20:10 a.m. #25 SPTI -1046 File SCSIPassThrough.cpp, Line 289
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 3C E0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x03590000: Len x10000
0x00 00 01 BA 44 00 6D F8 9D C1 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 9B 10 47 13 E6 01 7B C9 3C
0x06 A4 1F A1 C7 85 E0 01 D4 56 35 C8 C0 1C 8B 80

11:20:10 a.m. #26 CDR -1046 File Writer.cpp, Line 311
Illegal disc
F: SONY DVD RW DW-Q120A

11:20:10 a.m. #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:20:10 a.m. #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:20:10 a.m. #29 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 15583

11:20:10 a.m. #30 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 19/12/2006 11:49:06 a.m.
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.33a, size=36528 bytes, created 19/12/2006 11:48:20 a.m. (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

thanks


#4

Burn process failed at 16x (22,160 KB/s)
Try burning at 8X

CdRomPeripheral : SONY DVD RW DW-Q120A PYS1 iteatapi Port 4 ID 0 DMA: Off
You need to enable your DMA.
http://www.dvdplusvideo.com/dvdguide005.html

(Medium in drive: Unknown. Medium required by compilation: DVD.)
You need to update your firmware.
http://forum.rpc1.org/dl_firmware.php?download_id=2295


#5

thanks, I don´t notice the DMA off, I will enable it, I think, there is a configuration error in XP, maybe during the uninstallation/reinstallation of the clone DVD, because as I mentioned How is possible that in the other operative system the burner works, perfectly,and before the clonoDVD error the burner works perfectly too in this OS, I looked the last firmware on the storage.sony.com but I don´t found my burner model, well thanks I will talk later to you what happen


#6

Well, nothing works, I believe I need to reinstall windows