I cannt use nero 6.6.0.16 to burn dvd,with lg 4163b

vbimport

#1

i have to burned 10 useless dvd+r,it costs my $10 more.
my burner is lg 4163b,a104.
the software is nero 6.6.0.16,
every time,always the 4163b can not finish the disc,the log like this…

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘E:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic STEALTH DVD >Version: - HA 2 TA 0 - 6.6.0.16
Adapter driver: <st3wolf> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic STEALTH DVD st3wolf Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B L: CDRom0
Generic STEALTH DVD M: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 60MB (62456kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.9.2005
ISO编辑
13:32:37 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:32:37 #2 Text 0 File Reader.cpp, Line 127
Reader running

13:32:37 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

13:32:37 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

13:32:38 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

13:32:38 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2082831 (462:51.06, 4068MB)

13:32:38 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)

13:32:38 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

13:32:38 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:32:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2082832 (2082832) = #2082832/462:51.7
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2082832 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

13:32:38 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4265639936, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2082832 | lead-out | 1 | 0x41 | 0x00

13:32:38 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

13:32:39 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

13:32:39 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

13:32:39 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

13:32:39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:32:39 #17 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC…
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 …MCC…003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7…Bn…k…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

13:32:39 #18 Text 0 File DVDR.cpp, Line 5135
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

13:32:39 #19 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM

13:32:39 #20 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

13:42:20 #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2082832 (1FC810h), lenght 0 blocks

13:42:20 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:42:51 #23 SCSI -1194 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x20 0x00 0x0E 0x73 0x04

13:42:52 #24 CDR -1194 File ThreadedTransferInterface.cpp, Line 1909
PMA update failure
HL-DT-ST DVDRAM GSA-4163B\H1 T0

13:42:52 #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
Could not perform end of Disc-at-once

13:43:21 #26 SCSI -1194 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x20 0x00 0x0E 0x73 0x04

13:43:21 #27 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

13:43:21 #28 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

13:43:21 #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

13:43:21 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2002-10-7 12:00:00 (Adapter driver for rec)
File ‘Drivers\st3wolf.sys’: Ver=3.33.0.0, size=99360 bytes, created 2003-4-27 11:43:06 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

What do you have the LG plugged into…IDE?

What IDE controller driver is running?


#3

Have you tried burning with DVD Decrypter? That should tell you if it is your drive or Nero that is the problem.

http://www.doom9.org/Soft21/Rippers/SetupDVDDecrypter_3.5.4.0.exe


#4

This is a classic symptom of driver conflicts, I suspect. (Not a Nero problem.)


#5

SO HOW CAN I SOLVE THIS PROBLEM?
ONLY ONE BURNER LG 4163B INTO THE IDE,ANOTHER IDE IS HARDDRIVE。
I HAVE NO OTHERS DVDROM OR CDROM ON MY MOTHERBOARD。


#6

BUT,ALL THE SAME SETS,NO CHANG,I USE NERO 6。6。0。1,IT WORKED!

BUT IF I INSTALL THE VER。6。6。0。16,STILL BURN BAD DISC THAT CANNT READ ON ANY DVDROM。


#7

Something else seems to be wrong with your computer… did your keyboard get stuck in CAPS mode? It seems to get worse, too :wink:

But seriously, if you can write those discs with version 6.6.0.1, why not keep using that version. Maybe some small bug appeared in 6.6.0.16 that affects your media/drive combination (although it works fine for me).


#8

so i have to use 6601…