Hp nc 6320 laptop

vbimport

#1

I have a hp nc6320 that i replaced LCD display and the inverter and the LCD inverter cable. Installed new drivers and when i turn it on the screen is split into 4 smaller displays that are opposite from each other. ( see attached files)The laptop got ran over but the only damage that i could see was the display. Neither the case or the motherboard got any damage,When a monitor is attached the external monitor shows a good display I don’t know if I should replace the screen again or motherboard. Any help or suggestions would be greatly appreciated


#2

I don’t know if thats a calibration problem or one of the wires is simply wrong, so I would first make sure are the wires are indeed correct.