HP DVD Writer 1270D Won't burn DVD's Always gives "Burn Failed"

vbimport

#1

Just installed this burner, HP dvd1270 SATA, works except won’t finish a burn. I get this… Calibration Area Full, Burn Failed! report below

3K28-2118-2305-090X-005X-5055-MEMC-**** (*)
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0
(Nero Express)
Recorder: <HP DVD Writer 1270d> Version: GH23 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HP DVD Writer 1270d>Version: GH23 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 1270d atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 1270d D: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523276kB)
Free physical memory: 118MB (121052kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.12.2009
Burn DVD Image
8:02:25 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:02:26 PM #2 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

8:03:00 PM #3 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2203418 (489:38.68, 4303MB)

8:03:00 PM #4 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

8:03:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: HP DVD Writer 1270d, Media type: DVD-R
Disc Manufacturer ID: <CMC MA> <G. AM3>
Disc Application Code: 64, Disc Physical Code: 193

8:03:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<

Disc not writeable. Insert writeable disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)

8:03:01 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2203419 (2203419) = #2203419/489:38.69
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2203419 blocks [D: HP DVD Writer 1270d]

8:03:01 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: HP DVD Writer 1270d] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4512602112, ISRC “”
DAO layout:

__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2203419 | 2203419 | 0x00
2203419 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:03:04 PM #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

8:03:04 PM #10 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

8:03:04 PM #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

8:03:04 PM #12 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

8:03:04 PM #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

8:03:04 PM #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (22,160 KB/s)

8:03:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:03:05 PM #16 Text 0 File DVDR.cpp, Line 3297
Recording mode: Sequential Recording Mode

8:03:06 PM #17 Text 0 File DVDR.cpp, Line 3451
Start write address at LBA 0
DVD high compatibility mode: Yes

8:03:06 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06e6a940: Len x648

8:03:06 PM #19 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0, Extended part version: 0
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16…783]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
01 40 C1 FD 9E D8 52 00 - 02 84 0D 12 98 99 90 00 .@…R
03 43 4D 43 20 4D 41 00 - 04 47 2E 20 41 4D 33 00 .CMC.MA…G…AM3.
05 88 80 00 00 00 02 00 - 06 09 0D 14 98 88 90 00 …
07 88 80 00 00 00 00 00 - 08 07 17 0A 0E 09 04 00 …
09 95 07 0D 0B 88 88 00 - 0A 80 00 00 00 00 10 00 …
0B 06 17 15 B8 99 85 00 - 0C B8 9A 32 03 20 32 00 …2…2.
0D 00 00 D0 00 00 00 00 - 0E 09 1F 39 2F 25 1C 00 …9/%…
0F 50 19 29 19 89 B5 00 - 10 88 84 00 04 00 04 00 .P.)…
11 00 00 00 00 00 00 00 - 12 09 2B 37 2D 29 1B 00 …+7-)…
13 50 1D 2D 1F A6 B5 00 - 14 88 80 00 00 00 00 00 .P.-…
15 00 00 00 00 00 00 00 - 16 0B 45 3D 3B 1F 25 00 …E=;.%.
17 30 25 31 0D 8A B5 00 - 18 88 80 00 00 00 00 00 .0%1…
19 00 00 00 00 00 00 00 - 1A 0C 51 51 51 45 2D 00 …QQQE-.
1B 90 23 2D 19 79 B5 00 - 1C 88 80 00 00 00 00 00 …#-.y…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

8:03:06 PM #20 Text 0 File DVDR.cpp, Line 3589
Reserved Track size: 2203424 (219F20h, 4303MB) -> return code 0

8:03:06 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

8:03:15 PM #22 SPTI -1015 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1015)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 02
Buffer x08730040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

8:03:15 PM #23 CDR -1015 File Writer.cpp, Line 306
Calibration area full
D: HP DVD Writer 1270d

8:03:15 PM #24 Text 0 File DVDR.cpp, Line 3857
EndDAO: Last written address was -1 (FFFFFFFFh)

8:03:15 PM #25 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 16x (22,160 KB/s)

8:03:16 PM #26 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:03:23 PM #27 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

8:03:23 PM #28 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Try ImgBurn.


#3

That try was a “burn image to disk”


#4

[QUOTE=QuintinKittle;2475633]Nero Version: 8.3.6.0<hp dvd="" writer="" 1270d=""><serial ata=""><hp dvd="" writer="" 1270d=""><serial ata=""><cmc ma=""><g. am3=""><not specified="">[/QUOTE]

Try updating to 8.3.13.0:


</not></g.></cmc></serial></hp></serial></hp>


#5

[QUOTE=QuintinKittle;2475683]That try was a “burn image to disk”[/QUOTE]

pfloyd1 meant that you should try another burning software called IMGBurn. This is freeware and worth a try but I don’t think that this will solve your problem.

negritudes suggestion to update Nero to the latest Nero 8 is also an option.

Another possible problem is the media you are using, are you trying this type of media the first time? Have you tried other higher quality media too and have you also problems with these?

If you have no problems with higher quality media (Verbatim are very good ones) then it appears to be a problem with the media or the drives firmware. This can probably be solved with updating your drives firmware.

But from my experiense i can say that HP firmwaresupport is :Z but since the drive is a Lite-On iHAS224, this thread is probably also of interest for you