How do I crossflashed my Memorex DVD16+/-DL4RWIDA JWS6?

vbimport

#1

hi! my problem is that I use a Verbatim 16X DVD to burn an a iso. The write speed I use is 1x. When burning proccess starts about 2% it gaves my an error. So I try again with another Verbatim DVD and did the same thing. Then I try with a Khypermedia and the burning proccess was successfully completed. I have burn with Verbatim Dual Layer and the work great, but the Verbatim 16x are giving me problems. This is the erros it’s giving me with the Verbatims:

I/O Error

Device: [1:0:0] Memorex DVD16+/-DL4RWIDA JWS6 (E:) (ATA)

ScsiStatus: 0 x 02
Interpretation: Check Condition

CDB: 2A 00 00 01 BE 00 00 00 20 00
Interpretation: write(10) - Sectors: 114176 - 114207

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00
Interpretation: Command Sequence Error

someone told to crossflashed the drive with a LITE-ON firmware, but I don’t now how to do that.


#2

spitfire5, welcome to cdfreaks. :slight_smile:

You can use the firmware on my site. Your drive is a rebadge LiteOn 1673S but you can also use 1693S crossflashing firmware as well (even the fast burn version if you want):
http://codeguys.rpc1.org/firmwares.html#SOHW-1693S

Make sure you backup your firmware first using LtnFW.

Burning fast media at a slow speed will not necessarily give you better results. You really don’t want to burn Verbatim 16x media any slower than 8x.