Heres my error report

Can someone please help here I get the Scsi abort error too. I cannot find an option to switch DMA on. I have just recently installed a Maxtor 160GB SATA HDD and now I get this error if I try to burn with either my DVD or CD writers.

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0001), size=45056 bytes, created 06/05/2002 11:01:14
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 15:49:52
Nero version: 6.3.0.0
Recorder: <SONY DVD RW DW-U18A> Version: UYS1 - HA 2 TA 0 - 6.3.0.0
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY CD-RW CRX220E1 >Version: 6YS1 - HA 1 TA 1 - 6.3.0.0
Adapter driver: <nvidesm> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160M0 YAR5 Si3112r Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-U18A UYS1 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX220E1 6YS1 nvidesm Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 F: CDRom1
SONY DVD RW DW-U18A E: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 654MB (669792kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.4.2004
CueSheet
16:02:11 #1 Phase 94 File dlgbrnst.cpp, Line 1800
Power-Burn activated

16:02:11 #2 Text 0 File Reader.cpp, Line 118
Reader running

16:02:11 #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DW-U18A running

16:02:11 #4 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using CD-R/RW media

16:02:11 #5 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 296979 (66:01.54)

16:02:11 #6 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

16:02:11 #7 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: SONY DVD RW DW-U18A;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

16:02:11 #8 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:02:11 #9 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 296980 (296980) = #296980/65:59.55
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE1, 2352, config 0, wanted index0 0 blocks, length 296980 blocks [SONY DVD RW DW-U18A ]
--------------------------------------------------------------

16:02:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DW-U18A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE1, 2352/0x00, FilePos 0 352800 698849760, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
296980 | lead-out | 1 | 0x00 | 0x41

16:02:11 #11 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

16:02:11 #12 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

16:02:11 #13 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

16:02:11 #14 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 40x (6,000 KB/s)

16:02:11 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

16:02:11 #16 Text 0 File Mmc.cpp, Line 14803
StartDAO : CD-Text - Off

16:02:11 #17 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Power-Burn -> ON , Generic write control : ON

16:02:11 #18 Text 0 File Mmc.cpp, Line 15090
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 11 00 00 00 00
41 01 01 11 00 00 02 00
41 aa 01 14 00 42 01 37

16:02:18 #19 SCSI -500 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x087C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

16:02:18 #20 CDR -500 File Writer.cpp, Line 301
SCSI command aborted
SONY DVD RW DW-U18A\H2 T0

16:02:22 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

16:02:22 #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

16:02:23 #23 SCSI -1033 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01

16:02:26 #24 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

16:02:26 #25 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 40x (6,000 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0001), size=17005 bytes, created 06/05/2002 11:01:08
File ‘Drivers
videsm.sys’: Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 13/11/2002 15:10:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Many thanx Kenny

control panel: system:hardware:device manager,open IDE controllers:remove primary IDE then reboot DMA should be switched on do the same with secondary if you need to.
there is a post some where in cdfreaks cannot remember where.

Originally posted by smokie
[B]Can someone please help here I get the Scsi abort error too. I cannot find an option to switch DMA on. I have just recently installed a Maxtor 160GB SATA HDD and now I get this error if I try to burn with either my DVD or CD writers.

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0001), size=45056 bytes, created 06/05/2002 11:01:14
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 15:49:52
Nero version: 6.3.0.0
Recorder: <SONY DVD RW DW-U18A> Version: UYS1 - HA 2 TA 0 - 6.3.0.0
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY CD-RW CRX220E1 >Version: 6YS1 - HA 1 TA 1 - 6.3.0.0
Adapter driver: <nvidesm> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160M0 YAR5 Si3112r Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-U18A UYS1 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY CD-RW CRX220E1 6YS1 nvidesm Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 F: CDRom1
SONY DVD RW DW-U18A E: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 654MB (669792kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.4.2004
CueSheet
16:02:11 #1 Phase 94 File dlgbrnst.cpp, Line 1800
Power-Burn activated

16:02:11 #2 Text 0 File Reader.cpp, Line 118
Reader running

16:02:11 #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DW-U18A running

16:02:11 #4 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using CD-R/RW media

16:02:11 #5 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 296979 (66:01.54)

16:02:11 #6 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

16:02:11 #7 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: SONY DVD RW DW-U18A;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

16:02:11 #8 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<

16:02:11 #9 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 296980 (296980) = #296980/65:59.55
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE1, 2352, config 0, wanted index0 0 blocks, length 296980 blocks [SONY DVD RW DW-U18A ]

16:02:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DW-U18A ] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE1, 2352/0x00, FilePos 0 352800 698849760, ISRC “”
DAO layout:

_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
296980 | lead-out | 1 | 0x00 | 0x41

16:02:11 #11 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

16:02:11 #12 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

16:02:11 #13 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

16:02:11 #14 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 40x (6,000 KB/s)

16:02:11 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

16:02:11 #16 Text 0 File Mmc.cpp, Line 14803
StartDAO : CD-Text - Off

16:02:11 #17 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Power-Burn -> ON , Generic write control : ON

16:02:11 #18 Text 0 File Mmc.cpp, Line 15090
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 11 00 00 00 00
41 01 01 11 00 00 02 00
41 aa 01 14 00 42 01 37

16:02:18 #19 SCSI -500 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x087C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

16:02:18 #20 CDR -500 File Writer.cpp, Line 301
SCSI command aborted
SONY DVD RW DW-U18A\H2 T0

16:02:22 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

16:02:22 #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

16:02:23 #23 SCSI -1033 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01

16:02:26 #24 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

16:02:26 #25 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 40x (6,000 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0001), size=17005 bytes, created 06/05/2002 11:01:08
File ‘Drivers
videsm.sys’: Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 13/11/2002 15:10:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Many thanx Kenny [/B]

Are you sure you have install your mobo’s chipset drivers, cause dma is turned off for all of your drives. Also check the proper udma options in motherboard bios.

You are using Ritek cd media. Are these recommended for your sony dvdr?

Just in case is your power supplier >400w? Maybe your sony dvdr isnt feed with the proper voltage.

Ops i was wrong that firmware was for U12A. ANyway go to http://forum.rpc1.org for firmware forum and to http://forum.rpc1.org/dl_all.php and seek for your recorder firmware

Maybe the drivers for the serial ata device and controller conflict somehow with the atapi drivers. Look for newer drivers for your sata controller.

sorted guys…I downloaded the new nvidia IDE drivers and it sorted it all out. Thanx for your help

The log clearly shows which device drivers are in use for the drive in the SCSI device map section - nvidesm is the nVidia IDE drivers (the Microsoft ones appear there as atapi).

The original poster should upgrade to a later version of Nero even though things are now working - 6.3.0.0 doesn’t have full support for his drive (note the “Connected to MMC as unknown drive”).

David