Here is wxRipper that works on Windows 7 x64 and source code

Consumer Electronics
#1

I found an interesting program called Reflector which is a .NET decompiler. I used it one wxRipper and spent a day extracting data from the .resources files and building the forms and there resx and designer cs files to make a fully functional and modifiable source code from wxRipper 1.2.0.42

originally i compiled it for 64bit systems but since the wxMN.dll is only 32bit and that i have to create the code nearly from scratch I decided to attempt 32bit build on my 64bit system and it worked. so now wxRipper works on my Windows 7 x64 system and it should also work on Vista 64 also.

I might also do the same with the wx360.

yes this is real and yes this is while i wont code with .NET and especially C# .NET

Download Program
Download Source Code

#2

I updated the wxRipper source to always compiler for 32bit systems I forgot to change the Debug built to 32bit is all.

Download: wxRipper 1.2.0.42 Program
Download wxRipper 1.2.0.42 Source Code

I also Did the same thing with wx360 now so here is the program and source for it to.

Download: wx360 1.6.0.42 Program
Download wxRipper 1.6.0.42 Source Code

#3

I just tested it on Windows XP 32bit so it seem this will work on all windows.

#4

Thanks for the helpful information. Do you think your program works with Windows Vista 64bit? I have been trying to get wxripper to for about a week or so with no luck, and your post is the only one to mention wxripper not working for the 64 bit computer.

#5

Yeah it should work on Vista 64 bit. I have read around and it normally does not work on XP , Vista , 7 , 2008 64bit versions. this was recompiled on windows 7 and tested on both 32 bit and 64bit systems and it seems to work.

#6

Do you have a problem when take out the DL DVD and replace it with a Xbox 360 game? My DVD burner starts up again and says that DVD is too small. I’m not pressing the eject button and thought that I turned off the autostart. Do you have any suggestions? Thanks

#7

its a hot swapping trick you don’t eject the drive after you put the movie in. you either use a paper click to eject the drive from the small hole in the front or you take your drive apart and just swap it that way. there are tutorials on line if you really interested

#8

Worked like a charm thanks, I have another question. After you dump the layout and it makes a .iso flile, do you use that .iso file on imageburn or is there anything else I have to do? Your help is greatly appreciated.

#9

you have to use abgx360 to correct the image since it missing stuff. it creates an ImgBurn .dvd project file which you burn the image to a DVDR+DL disc. again there are tutorials on how to use it correctly so if you want to know more look online else were.

#10

The link to the source for the wx360 program isn’t valid anymore. Would you mind reuploading it?

Thanks for your work, this is awesome!

[QUOTE=devilsclaw;2492729]I updated the wxRipper source to always compiler for 32bit systems I forgot to change the Debug built to 32bit is all.

Download: wxRipper 1.2.0.42 Program
Download wxRipper 1.2.0.42 Source Code

I also Did the same thing with wx360 now so here is the program and source for it to.

Download: wx360 1.6.0.42 Program
Download wxRipper 1.6.0.42 Source Code[/QUOTE]

#11

Original links started to dye out due to people not downloading them so I will host the files.

Here are the new links.

wxRipper:
Download: wxRipper 1.2.0.42 Program
Download wxRipper 1.2.0.42 Source Code

wx360:
Download: wx360 1.6.0.42 Program
Download wxRipper 1.6.0.42 Source Code

#12

I need some help. I downloaded all the programs there but it still won’t work. It says that it is not a valid win32 application. I have Vista 64 bit. Please Help!!!

#13

I have seen that error before and im not sure the cause. but i know a recompile of the program from the machine you want to run it on will fix it.

#14

Thank you sir (I’m assuming a sir, never know what the gender of a devil’s claw is.)

#15

beste,
ik heb sinds gisteren ook de wxripper geinstalleerd en ik kan wel dumpen maar mijn isofiles zijn maar zo’n 245MB.
moet dit normaal niet veeeeeel groter zijn?
zou iemand mij kunnen vertellen hoe dit komt en of hoe ik dit op kan lossen?
alvast vriendelijk bedankt

#16

beste,

ik ben sinds gisteren ook begonnen met het proberen te rippen van xboxgames.
hiervoor gebruik ik ook het programma wxripper.
alleen zijn als uitkomst mijn isofiles heel klein.
zo’n 245mb.
moet het normaal niet rond de 7 gig zijn?
kan iemand mij hierbij helpen?
alvast bedankt.
groeten
kevin

#17

[QUOTE=devilsclaw;2492563]I found an interesting program called Reflector which is a .NET decompiler. I used it one wxRipper and spent a day extracting data from the .resources files and building the forms and there resx and designer cs files to make a fully functional and modifiable source code from wxRipper 1.2.0.42

originally i compiled it for 64bit systems but since the wxMN.dll is only 32bit and that i have to create the code nearly from scratch I decided to attempt 32bit build on my 64bit system and it worked. so now wxRipper works on my Windows 7 x64 system and it should also work on Vista 64 also.

I might also do the same with the wx360.

yes this is real and yes this is while i wont code with .NET and especially C# .NET

Download Program
Download Source Code[/QUOTE]

this does not work anymore, is there any other way of getting that software?
need it urgently ,
thankyou

#18

ANY searchengine is your friend!!

#19

Thank you sir. Thank you very much indeed.