Help with Nero burning rom 7 ultra edition

vbimport
#1

I use anydvd to crack DVD’s and nero has always worked in the past but recently almost every time I burn it reads the dvd fine and then fails when it starts to write. Here is my log from the last session, any help would be great thanks

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0

Recorder: <SONY DVD±RW DW-Q58A> Version: UDS2 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD±RW DW-Q58A >Version: UDS2 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9120821AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD±RW DW-Q58A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LY0351F WOC913J 2.0B vaxscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD±RW DW-Q58A D: CDRom0
LY0351F WOC913J E: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095480kB)
Free physical memory: 987MB (1011704kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.2.2007
===== Disc-Copy over image - 1st step : Copy to image …

12:13:51 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:13:52 PM #2 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:13:52 PM #3 Text 0 File DVDCopy.cpp, Line 319
DVD Track-Information from source disc:
Media Type: DVD-ROM
Last LBA on layer 0 = 1372655 / 0x14F1EF / 2680MB
S01 T01 Con 0x14 Start 0 Len 2744423 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

12:13:52 PM #4 Text 0 File DVDCopy.cpp, Line 434
Max -1 tracks of 1 allowed to copy
1: 0 - 2744423 = 2744423, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

12:13:52 PM #5 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

12:13:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2744422 (609:52.22, 5360MB)

12:13:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

12:13:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:13:52 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2744423 (2744423) = #2744423/609:52.23
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2744423 blocks [Image Recorder]
--------------------------------------------------------------

12:13:52 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5620578304, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2744423 | 2744423 | 0x00
0 | 1 | 1 | 0x41 | 2744423 | 2744423 | 0x00
2744423 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:13:52 PM #11 Phase 120 File dlgbrnst.cpp, Line 1746
Creating the image for burning

12:13:52 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:31:39 PM #13 Text 0 File WriterStatus.cpp, Line 113
<Image Recorder> start writing Lead-Out at LBA 2744423 (29E067h), length 0 blocks

12:31:40 PM #14 Phase 121 File dlgbrnst.cpp, Line 1746
Creating Image completed successfully

12:31:41 PM #15 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:31:41 PM #16 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:31:41 PM #17 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

===== Disc-Copy over image - 2nd step : Burn the image …

12:31:45 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:31:46 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ‘’
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ‘’
Blocksize = 2048
TrackMode = ‘TRM_DATA_MODE1’
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 5620578304
CUES:
LBRK: Last LBA on layer 0 = 1372655 / 0x14F1EF / 2680MB
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Josh\My Documents\TempImage.nrg>

12:31:46 PM #3 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

12:32:31 PM #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 2744422 (609:52.22, 5360MB)

12:32:31 PM #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

12:32:31 PM #6 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: SONY DVD±RW DW-Q58A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0

12:32:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:32:31 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2744423 (2744423) = #2744423/609:52.23
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2744423 blocks [D: SONY DVD±RW DW-Q58A]
--------------------------------------------------------------

12:32:31 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: SONY DVD±RW DW-Q58A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5620578304, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2744423 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2744423 | 0 | 0x00
2744423 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:32:31 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:32:31 PM #11 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3,324 KB/s)

12:32:31 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:32:53 PM #13 SPTI -1015 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1015)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 02
Buffer x04bd8dc0: Len xc
0x00 0A 00 00 00 00 00 00 00 14 F1 F0

12:32:53 PM #14 Text 0 File DVDPlusDualLayer.cpp, Line 651
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)

12:32:53 PM #15 CDR -1015 File ThreadedTransferInterface.cpp, Line 1779
Calibration area full
D: SONY DVD±RW DW-Q58A

12:32:53 PM #16 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779
Could not perform start of Disc-at-once

12:32:53 PM #17 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3,324 KB/s)

12:32:53 PM #18 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:32:54 PM #19 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

12:32:54 PM #20 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 3:00:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.09a, size=46080 bytes, created 8/19/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

#2

Welcome to the forum :slight_smile:

I think your burner has a problem with the Ritek D01 media. You could try a firmware update and see if that helps, but otherwise I’d recommend switching to Verbatim (the only DL I’d use unless I fancied a gamble). :slight_smile:

#3

I have a problem with burning dvds. I have a samsung sh-s182d burner and am beginning to think the devil created this burner. It takes 2 hours to burn a dvd. I use nero 7. I had nero 6 and had the same problem. I have the latest firmware for this buner.

#4

Welcome to the forum :slight_smile:

I have the same burner and it’s been terrific for me.

Try checking/enabling DMA (there’s a link in my sig) :slight_smile:

#5

thanks how do I do a firmware update?

#6

Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1

This media is just a waste of money & time.

#7

Agreed, I’d ditch it and buy Verbatim.

It’s supported in the current firmware on the drive, but an update might mean better support.

First we need to know what firmware is on the drive right now. You can find this out by running Nero InfoTool and checking what it says for “Firmware”.

#8

To add to this I’d suggest a different method of copying DL discs.

I would use DVD Decrypter in it’s ISO read mode to create an ISO image and then burn that image with ImgBurn. With this approached the layer break will be correctly set so playback shouldn’t suffer hesitation at the layer break.

As with Nero you might need some other application to overcome copy protection.

Whilst I think V7 has improved it’s DL media writing ability there’s no way I’d trust an expensive (Verbatim) DL disc to it.

#9

my firmware version is UDS2

Tim can you hook me up with those programs?
and how expensive is Verbatim DL? becasue the fujifilm I can get on sale for $20 for a 25 pack

#10

DVD Decrypter
ImgBurn

Verbatim DL are likely to be cheaper in the US than they are in the UK - check out our Bargain Basment forum, US members always post good media deals in there. :slight_smile:

Is your firmware deifinitely UDS2 and not UYS2?

#11

CD-ROM: <SONY DVD±RW DW-Q58A >Version: [B]UDS2[/B] - HA 1 TA 0 - 7.5.9.0

Maybe some OEM…

#12

That’s what I was thinking too (didn’t spot that thanks :)).

#13

Another rebadged Liteon slimtype with yet another OEM firmware…

http://codeguys.rpc1.org/firmwares.html#cat_slimdvdrw

Yeah, DELL OEM:
http://forum.rpc1.org/dl_firmware.php?download_id=2113