Help, nero dvd burn error

vbimport

#1

i finally burned a dvd using dvd-video, but it won’t play in my standalone dvd player. its a panasonic & says it plays dvd-rv31, the dvd however will play on my computer fine though.

When i try to burn in the dvd-rom iso part of nero it always fails half thro & gives me a error that reads"tdk dvdrw0404n command sequence error"

Can anyone help me with this? I’d very much appreciate it, feel free to email me at flav027@aol.com That’s zero 27

Thanks,

Jason


#2

I did burn a dvd that plays in my standalone but that was with the software that came with the burner, but that software wont let you burn vob files only avi’s.

can someone please help me with this problem? the version of nerco using is 6


#3

Firstly, upgrade to Nero 6.3.1.6 if you’re not already on that version.

If you’re still having burn problems, post the entire log file (use the Save Log… button, load the file into a text editor, then cut and paste into a forum post - ideally turning off Smilies) less the top two or three lines with your name and Nero serial number.

David


#4

Thanks, I’ll try that today & get back to you:-)


#5

Recorder: <TDK DVDRWO404N> Version: 1.08 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TDK DVDRW0404N >Version: 1.08 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD20OBB-32AUA1 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD307AA-OOBAAO atapi Port 0 ID 1 DMA: On CdRomPeripheral : TDK DVDRWO404N atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 6YO80LO atapi Port 1 ID 1 DMA: On
--------------------------------------------AutoRun : 1
Excluded drive IDs:
CmdQueuing :1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed :0 BUFE :0
Physical memory : 511 MB (523760kB) Free physical memory: 167MB (171028kB) Memory in use :67 % Uncached PFiles: OxO Use Static Write Speed Table: 0 Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.4.2004
UDF/ISO compilation
9:47:10 AM #1 Phase 112 File dlgbrnst.cpp, Line 1818 DVD-Video files reallocation started

9:47:11 AM #2 Phase 114 File dlgbrnst.cpp, Line 1818
DVD-Video files reallocation completed (no file modified)

9:47:11 AM #3 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings -----------------------------------------Determine maximum speed: FALSE
Simulate :FALSE
Write : TRUE
Finalize CD :TRUE
MLsttti k$lt :FALSE
Burning,-mode : DAO
Nero Report 1
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write IS09660 ;1 file extensions : TRUE

9:47:11 AM #4 Phase 111 File dlgbrnst.cpp, Line 1818 DVD-Video files sorted

9:47:11 AM #5 Text 0 File Reader.cpp, Line 118 Reader running

9:47:11 AM #6 Text 0 File Writer.cpp, Line 127
Writer TDK DVDRW0404N running

9:47:11 AM #7 IS09660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000)

9:47:11 AM #8 IS09660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000)

9:47:11 AM #9 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media

9:49:59 AM #10 Text 0 File DIgWaitCD.cpp, Line 224
Last possible write address on media: 2298495 (510:46.45) Last address to be written: 1439503 (319:53.28)

9:49:59 AM #11 Text 0 File DigWaitCD.cpp, Line 229 Write in overburning mode: FALSE

9:49:59 AM #12 Text 0 File DigWaitCD.cpp, Line 1688 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: CIVIC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193

9:49:59 AM #13 Text 0 File ThreadedTransferlnterface.cpp, Line 757Setup items (after recorder preparation)
0: TRM DATA MODE1 (CTransferltem)
2 indices, indexO (150) not provided
original CD pos #0 + 1439504 (1439504) = #1439504/319:53.29
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA MODE1, 2048, config 0, wanted indexO 0 blocks, length 1439504 blo
cks [TDK DVDRW0404N ]

9:49:59 AM #14 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info0

Burning to TDK DVDRWO404N on a DVD-R media

9:49:59 AM #15 Text 0 File ThreadedTransferlnterface.cpp, Line 910
Prepare recorder TDK DVDRW0404N for write in cue-sheet-DAO DAO infos:
Nero Report 2
MCN:
TOCTYPE: OxO Session Closed, CD fixated Tracks 1 to 1:
TRM DATA MODE1, 2048/0x0, ISRC “”, FilePos 0 307200 -1346555904

9:49:59 AM #16 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started

9:49:59 AM #17 Phase 25 File dlgbrnst.cpp, Line 1818Caching of files completed

9:49:59 AM #18 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 4x (5,520 KB/s)

9:49:59 AM #19 Text 0 File ThreadedTransferlnterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

9:49:59 AM #20 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 9:04,638 (544638ms) -> OK

9:49:59 AM #21 Text 0 File DVDR.cpp, Line 1407 Recording mode: Sequential Recording Mode

9:49:59 AM #22 Text 0 File Mmc.cpp, Line 18119 Set BUFE: supported -> ON

9:49:59 AM #23 Text 0 File DVDR.cpp, Line 1522 Start write address at LBA 0 DVD high compatibility mode: Yes

9:49:59 AM #24 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) —Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DV D+R/+RW)
End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

9:50:03 AM #25 SCSI -1023 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04630000 Status: 0x04 (0x01, SCSI_ERR)
HA-Status OxOO (0x00, OK)
TA-Status 0x02 (0x01, SCSI TASTATUS CHKCOND) Sense Key: 0x05 (KEY-ILLEGAL-REQUEST) Sense Code: Ox2C
Sense Qual: OxOO
CDB Data: Ox2A OxOO OxOO OxOO OxOO OxOO OxOO OxOO 0x20 OxOO OxOO OxOO
Nero Report 3
Sense Data: 0x70 OxOO 0x05 OxOO OxOO OxOO OxOO OxOA OxOO OxOO OxOO OxOO Ox2C OxOO

9:50:03 AM #26 CDR -1023 File Writer.cpp, Line 335 Command sequence error

9:50:03 AM #27 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion

9:50:03 AM #28 Text 0 File ThreadedTransfer.cpp, Line 221conversion idle, stopping reader

9:50:03 AM #29 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (Oms) -> OK

9:50:03 AM #30 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (Oms) -> OK

9:50:03 AM #31 Phase 38 File dlgbrnst.cpp, Line 1818 Burn process failed at 4x (5,520 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=6.1.0.88, size=24698 bytes, created 5/22/2003 12:20:36 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.50a, size=17136 bytes, created 4/5/2004 4:17:12 AM (PrassiNeritas driv er for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpspl.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 A M (Adapter driver for rec)


#6

It looks like you’re using Nero 6.0.0.0. As I said, upgrade to 6.3.1.6 - a lot of bugs were fixed.

Further, it looks like you’ve also got both Roxio and Prassi/Veritas/Sonic writing software installed. If Nero 6.3.1.6 doesn’t work, try uninstalling all other writing software and see if it works then.

The log looks strangely corrupt to me - ones and Ls interchanged, also zero and O. Did it start out like that?

David