Help Needed

vbimport

#1

The image above shows an error I am getting when I try to burn a DVD-9 DL using ConvertXDVD.

I went out and got myself 6 brand spanking newVerbatim DVD-9 DL discs @ $5.25 +tax a disc from a local computer shop. Expensive for media backup

I have already got two coasters out of six :a :a :a :a

If I am to complete my project I need atleast 4 of them to burn correctly.

Here is my burn settings inside ConvertXDVD

Local shop sells discs individually, not as shown in a pack

Please tell me what I need to do

If I am using the wrong Codeguy patched firmware for this drive please tell me which one is best for making good DVD-9 DL burns and what settings I need to adjust to make good burns.

Thanks

Update: Specific Patches being used
166S.DS1A-DS1C-DS1E.patched.rar\DS1E-this_is_the_newest\16x\166S.DS1E.patched-rs16xR_16xRW_10xDVD9.exe for my JLMS XJ-HD166S

1633S.BS0Y.patched-cf-mcled.rar for LiteOn SOHW-1633S


#2

Here is a brand new log thru CopyToDVD:

1/8/2007 1:29:20 AM warning AUTOUPDATE : The update site is not reachable. (0 - Socket Error # 10061
Connection refused.)
1/8/2007 1:29:03 AM info Finalizing…
1/8/2007 1:29:03 AM error Write error at 30032 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
1/8/2007 1:29:03 AM warning Reporting invalid address for write at sector 30016 - trying to continue
1/8/2007 1:29:03 AM warning at sector 30016 (16) - recover sequence started
1/8/2007 1:29:03 AM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0
1/8/2007 1:29:03 AM info Try #0 - duration 3358803 µs
1/8/2007 1:28:32 AM info Lead-in burning time (mS) 1089
1/8/2007 1:28:31 AM info Start Write Buffer
1/8/2007 1:28:31 AM info Start writing…
1/8/2007 1:28:31 AM info DMA Disabled
1/8/2007 1:28:31 AM info Buffer under-run proof enabled
1/8/2007 1:28:31 AM info Layer change set to LBA 2084288 (3.98 Gb.)
1/8/2007 1:27:59 AM info Writing speed requested x2.4, effective x2.4
1/8/2007 1:27:59 AM info Writing session #1 and closing disc.
1/8/2007 1:27:59 AM info Open Image file "C:\Documents and Settings\Mike2006\Application Data\CopyToDvd\COPYTODVD_01082007_012759_281.cache"
1/8/2007 1:27:59 AM info Required sector size : 4144192
1/8/2007 1:27:59 AM info Available sector size : 4173824
1/8/2007 1:27:59 AM info Available write speed: 2.4x
1/8/2007 1:27:59 AM info Media ID: MKM-001-00
1/8/2007 1:27:59 AM warning Layer Break is around 00:02:34, optimal value can’t be set within the possible range of [2072096…2086784].
1/8/2007 1:27:59 AM info Volume name: "Backup001"
1/8/2007 1:27:59 AM info 120mm DVD
1/8/2007 1:27:59 AM info Detected media $002B : DL DVD+R
1/8/2007 1:27:59 AM info Finished browsing files - Data size 7.9 Gb.
1/8/2007 1:27:59 AM info File scan complete: 28 files, 2 directories
1/8/2007 1:27:59 AM info Start Browsing file structures
1/8/2007 1:27:59 AM info IDE Controler manufacturer : (Standard IDE ATA/ATAPI controllers)
1/8/2007 1:27:59 AM info IDE Controler Description : Standard Dual Channel PCI IDE Controller
1/8/2007 1:27:59 AM info Location : PCI bus 0, device 31, function 1
1/8/2007 1:27:59 AM info IDE Controler manufacturer : (Standard IDE ATA/ATAPI controllers)
1/8/2007 1:27:59 AM info IDE Controler Description : Standard Dual Channel PCI IDE Controller
1/8/2007 1:27:59 AM info Location : PCI bus 0, device 31, function 2
1/8/2007 1:27:59 AM info IDE Controler manufacturer : (Standard IDE ATA/ATAPI controllers)
1/8/2007 1:27:59 AM info IDE Controler Description : Standard Dual Channel PCI IDE Controller
1/8/2007 1:27:59 AM info Location : PCI bus 2, device 0, function 0
1/8/2007 1:27:59 AM info Support Media : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
1/8/2007 1:27:59 AM info Writing device used : 5:1:0 - LITE-ON DVDRW SOHW-1633S BS0Y [F] (Ide)
1/8/2007 1:27:59 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
1/8/2007 1:27:59 AM info Using DVD Video filelist creation mode.
1/8/2007 1:27:59 AM info ParamStr 4 = "/writespeed=2.4"
1/8/2007 1:27:59 AM info ParamStr 3 = "/writedevice=F"
1/8/2007 1:27:59 AM info ParamStr 2 = "/volumename=Backup001"
1/8/2007 1:27:59 AM info ParamStr 1 = "/dvdvideofl=C:\Documents and Settings\Mike2006\Application Data\Vso~c2c_fl.tmp"
1/8/2007 1:27:59 AM info ParamStr 0 = "C:\PROGRA~1\VSO\COPYTO~1\CopyToCD.exe"
1/8/2007 1:27:59 AM info User default language : 1033 (0x0409h) - English (United States)
1/8/2007 1:27:59 AM info System default language : 1033 (0x0409h) - English (United States)
1/8/2007 1:27:59 AM info Version 4.0.0.38
1/8/2007 1:27:59 AM info ExeName : "C:\PROGRA~1\VSO\COPYTO~1\CopyToCD.exe"
1/8/2007 1:27:59 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
1/8/2007 1:27:59 AM info 32 bits native system
1/8/2007 1:27:53 AM info ******************** Report session started ********************


#3

According to the log you have bought DVD+R DL media, not DVD-R DL.

I suggest to creat an image/ISO on the hdd, then burning this image using [B]Imgburn[/B].


#4

No burners like to have DMA disabled as your log shows.

Try this link to see if it can be fixed.