ok, i checked DMA setting, it’s on
i use verbatim 4x dvd-r, buring iso image with nero 6.3.1.10 using LITE-ON DVDRW LDW-851SX external
however, i kept getting Session fixation error, Could not perform end of Disc-at-once , that’s say not always, but every 2 out 4 disc will get this problem
i always do simulation test first, sometimes it can success, sometimes don’t
, sometimes when simulation success, doesn’t mean real burnign can success too.
so any one can help here?
below is full log
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 216MB (222184kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.5.2004
Burn DVD Image
?? 11:11:17 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 11:11:17 #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 11:11:17 #3 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 11:11:17 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1945413 (432:18.63, 3799MB)
?? 11:11:17 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 11:11:17 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 11:11:17 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 11:11:17 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1945414 (1945414) = #1945414/432:18.64
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1945414 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 11:11:17 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3984207872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1945414 | lead-out | 1 | 0x00 | 0x41
?? 11:11:17 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 11:11:17 #11 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 11:11:17 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 11:11:17 #13 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
?? 11:11:17 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 11:11:17 #15 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 12:07,277 (727277ms) -> OK
?? 11:11:17 #16 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 11:11:17 #17 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 11:11:17 #18 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 11:11:17 #19 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 11:23:33 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 1945414 (1DAF46h), lenght 0 blocks
?? 11:23:33 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 11:23:33 #22 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 1945423
?? 11:23:36 #23 Phase 133 File dlgbrnst.cpp, Line 1841
Writing short lead-out
?? 11:24:18 #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 11:24:18 #25 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 11:24:18 #26 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10 (Nero Express)
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 228MB (234172kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.5.2004
Burn DVD Image
?? 05:12:56 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 05:12:56 #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 05:12:56 #3 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 05:12:57 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2039861 (453:18.11, 3984MB)
?? 05:12:57 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 05:12:57 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 05:12:57 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 05:12:57 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2039862 (2039862) = #2039862/453:18.12
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039862 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 05:12:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4177637376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2039862 | lead-out | 1 | 0x00 | 0x41
?? 05:12:57 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 05:12:57 #11 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 05:12:57 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 05:12:57 #13 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
?? 05:12:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 05:12:57 #15 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode
?? 05:12:57 #16 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 05:12:57 #17 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 05:12:57 #18 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 05:13:04 #19 Text 0 File Cdrdrv.cpp, Line 1291
05:13:04.088 - LITE-ON DVDRW LDW-851S\H3 T0 : Queue again later
?? 05:13:08 #20 SCSI -500 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x034D5000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
?? 05:13:09 #21 SCSI -1114 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x04E30000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00
?? 05:13:09 #22 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
LITE-ON DVDRW LDW-851S\H3 T0
?? 05:13:09 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 05:13:09 #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
?? 05:13:09 #25 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 31
?? 05:16:47 #26 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 214MB (219668kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.5.2004
Burn DVD Image
?? 05:40:39 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 05:40:39 #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 05:40:39 #3 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 05:40:39 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2039861 (453:18.11, 3984MB)
?? 05:40:39 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 05:40:39 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 05:40:39 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 05:40:39 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2039862 (2039862) = #2039862/453:18.12
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039862 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 05:40:39 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4177637376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2039862 | lead-out | 1 | 0x00 | 0x41
?? 05:40:39 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 05:40:39 #11 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 05:40:39 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 05:40:39 #13 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
?? 05:40:40 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 05:40:40 #15 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 12:41,374 (761374ms) -> OK
?? 05:40:40 #16 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 05:40:40 #17 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 05:40:40 #18 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 05:40:40 #19 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 05:53:25 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2039862 (1F2036h), lenght 0 blocks
?? 05:53:25 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 05:53:25 #22 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2039871
?? 05:53:28 #23 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 05:53:28 #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 05:53:33 #25 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 229MB (234540kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.5.2004
Burn DVD Image
?? 05:56:21 #1 SCSI -1076 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00
?? 05:56:26 #2 Text 0 File Reader.cpp, Line 118
Reader running
?? 05:56:26 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 05:56:26 #4 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 05:56:26 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2039861 (453:18.11, 3984MB)
?? 05:56:26 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 05:56:26 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 05:56:26 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 05:56:26 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2039862 (2039862) = #2039862/453:18.12
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039862 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 05:56:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4177637376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2039862 | lead-out | 1 | 0x00 | 0x41
?? 05:56:26 #11 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 05:56:26 #12 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 05:56:26 #13 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 05:56:26 #14 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
?? 05:56:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 05:56:26 #16 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 12:41,374 (761374ms) -> OK
?? 05:56:26 #17 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 05:56:26 #18 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 05:56:26 #19 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 05:56:26 #20 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 06:09:13 #21 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2039862 (1F2036h), lenght 0 blocks
?? 06:09:13 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 06:09:13 #23 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2039871
?? 06:09:16 #24 Phase 133 File dlgbrnst.cpp, Line 1841
Writing short lead-out
?? 06:09:59 #25 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 06:09:59 #26 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 06:09:59 #27 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10 (Nero Express)
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 424MB (434340kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.5.2004
Burn DVD Image
?? 08:01:41 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 08:01:41 #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 08:01:41 #3 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 08:01:41 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2265723 (503:29.48, 4425MB)
?? 08:01:41 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 08:01:41 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 08:01:41 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 08:01:41 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2265724 (2265724) = #2265724/503:29.49
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2265724 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 08:01:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4640202752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2265724 | lead-out | 1 | 0x00 | 0x41
?? 08:01:41 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 08:01:41 #11 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 08:01:41 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 08:01:41 #13 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
?? 08:01:41 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 08:01:42 #15 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode
?? 08:01:42 #16 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 08:01:42 #17 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 08:01:42 #18 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 08:01:51 #19 Text 0 File Cdrdrv.cpp, Line 1291
20:01:51.174 - LITE-ON DVDRW LDW-851S\H3 T0 : Queue again later
?? 08:16:14 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2265724 (22927Ch), lenght 0 blocks
?? 08:16:14 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 08:16:14 #22 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2265727
?? 08:17:13 #23 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 546MB (559924kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.5.2004
Burn DVD Image
?? 08:47:00 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 08:47:00 #2 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 08:47:07 #3 Phase 40 File dlgbrnst.cpp, Line 1841
Aborted by user
?? 08:47:07 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2324689 (516:35.64, 4540MB)
?? 08:47:07 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 08:47:07 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S
Medium not present
?? 08:47:07 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 563MB (577452kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.5.2004
Burn DVD Image
?? 08:48:02 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 08:48:02 #2 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 08:48:13 #3 Phase 40 File dlgbrnst.cpp, Line 1841
Aborted by user
?? 08:48:13 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2324689 (516:35.64, 4540MB)
?? 08:48:13 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 08:48:13 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S
Medium not present
?? 08:48:13 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 478MB (490324kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.5.2004
Burn DVD Image
?? 09:23:54 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 09:23:54 #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 09:23:54 #3 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 09:23:55 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2223008 (494:00.08, 4341MB)
?? 09:23:55 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 09:23:55 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 09:23:55 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 09:23:55 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2223009 (2223009) = #2223009/494:0.9
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2223009 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 09:23:55 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4552722432, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2223009 | lead-out | 1 | 0x00 | 0x41
?? 09:23:55 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 09:23:55 #11 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 09:23:55 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 09:23:55 #13 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
?? 09:23:55 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 09:23:55 #15 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 13:47,492 (827492ms) -> OK
?? 09:23:55 #16 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 09:23:55 #17 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 09:23:55 #18 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 09:23:55 #19 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 09:37:52 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2223009 (21EBA1h), lenght 0 blocks
?? 09:37:52 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 09:37:52 #22 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2223023
?? 09:37:55 #23 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 09:37:55 #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 09:38:00 #25 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5,520 KB/s)
?? 09:38:01 #26 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
?? 09:38:01 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 09:38:01 #28 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 13:47,492 (827492ms) -> OK
?? 09:38:01 #29 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 09:38:01 #30 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 09:38:01 #31 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 09:38:01 #32 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 09:51:57 #33 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2223009 (21EBA1h), lenght 0 blocks
?? 09:51:57 #34 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 09:51:58 #35 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2223023
?? 09:52:01 #36 Phase 133 File dlgbrnst.cpp, Line 1841
Writing short lead-out
?? 09:52:43 #37 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 09:52:43 #38 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 09:52:43 #39 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 448MB (459380kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.5.2004
Burn DVD Image
?? 09:44:47 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 09:44:47 #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 09:44:47 #3 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 09:44:48 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2282086 (507:07.61, 4457MB)
?? 09:44:48 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 09:44:48 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 09:44:48 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 09:44:48 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2282087 (2282087) = #2282087/507:7.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282087 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 09:44:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4673714176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2282087 | lead-out | 1 | 0x00 | 0x41
?? 09:44:48 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 09:44:48 #11 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 09:44:48 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 09:44:48 #13 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
?? 09:44:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 09:44:48 #15 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 14:08,820 (848820ms) -> OK
?? 09:44:48 #16 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 09:44:48 #17 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 09:44:48 #18 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 09:44:48 #19 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 09:59:07 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2282087 (22D267h), lenght 0 blocks
?? 09:59:07 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 09:59:07 #22 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2282095
?? 09:59:16 #23 SCSI -1135 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
?? 09:59:16 #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 09:59:16 #25 CDR -1135 File ThreadedTransferInterface.cpp, Line 1701
Write error
?? 09:59:16 #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1701
Could not perform end of Disc-at-once
?? 09:59:16 #27 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was -1
?? 09:59:16 #28 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 09:59:16 #29 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 09:59:23 #30 Phase 34 File dlgbrnst.cpp, Line 1841
Simulation failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Aquarius
Linux
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 ?? 01:36:00
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 ?? 09:48:06
Nero version: 6.3.1.10
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS08 - HA 3 TA 0 - 6.3.1.10
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.1.10
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00FUA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom0
LITE-ON DVDRW LDW-851S G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 447MB (458720kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.5.2004
Burn DVD Image
?? 10:13:30 #1 Text 0 File Reader.cpp, Line 118
Reader running
?? 10:13:30 #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
?? 10:13:31 #3 Text 0 File Burncd.cpp, Line 3200
Turn on Disc-at-once, using DVD media
?? 10:13:31 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2282086 (507:07.61, 4457MB)
?? 10:13:31 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
?? 10:13:31 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
?? 10:13:31 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
?? 10:13:31 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2282087 (2282087) = #2282087/507:7.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282087 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
?? 10:13:31 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4673714176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2282087 | lead-out | 1 | 0x00 | 0x41
?? 10:13:31 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
?? 10:13:31 #11 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.
?? 10:13:31 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
?? 10:13:31 #13 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5,520 KB/s)
?? 10:13:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 10:13:31 #15 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 14:08,820 (848820ms) -> OK
?? 10:13:31 #16 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 10:13:31 #17 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 10:13:31 #18 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 10:13:31 #19 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 10:27:45 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2282087 (22D267h), lenght 0 blocks
?? 10:27:45 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 10:27:46 #22 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2282095
?? 10:27:49 #23 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 10:27:49 #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 10:27:55 #25 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5,520 KB/s)
?? 10:27:56 #26 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)
?? 10:27:56 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
?? 10:27:56 #28 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 14:08,820 (848820ms) -> OK
?? 10:27:56 #29 Text 0 File DVDR.cpp, Line 1650
Recording mode: Sequential Recording Mode for Multisession
?? 10:27:56 #30 Text 0 File Mmc.cpp, Line 20051
Set BUFE: supported -> ON , SMART-BURN : ON
?? 10:27:56 #31 Text 0 File DVDR.cpp, Line 1791
Start write address at LBA 0
DVD high compatibility mode: Yes
?? 10:27:56 #32 Text 0 File Cdrdrv.cpp, Line 8024
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
?? 10:42:12 #33 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2282087 (22D267h), lenght 0 blocks
?? 10:42:12 #34 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
?? 10:42:12 #35 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was 2282095
?? 10:42:15 #36 Phase 133 File dlgbrnst.cpp, Line 1841
Writing short lead-out
?? 10:42:29 #37 SCSI -1176 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02
?? 10:42:34 #38 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 10:42:34 #39 CDR -1176 File ThreadedTransferInterface.cpp, Line 1701
Session fixation error
LITE-ON DVDRW LDW-851S\H3 T0
?? 10:42:34 #40 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1701
Could not perform end of Disc-at-once
?? 10:42:34 #41 Text 0 File DVDR.cpp, Line 2001
EndDAO: Last written address was -1
?? 10:42:34 #42 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 10:42:34 #43 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
?? 10:42:34 #44 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999/9/10 ?? 01:36:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2004/5/7 ?? 04:32:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 ?? 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
