HELP: Can't burn layer 2 on both burners

vbimport

#1

Hi,

I have a LG GH22NP20 and an older LG dual layer burner and when the burner switches to burn layer 2 it stops (50% of process)

Nero fails when it switches to 2nd layer

ImgBrn says “invalid address for write”

Here’s what happens

I 12:13:36 ImgBurn Version 2.4.2.0 started!
I 12:13:36 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 12:13:36 Total Physical Memory: 1Â 293Â 036 KB - Available: 1Â 014Â 176 KB
W 12:13:36 Drive E:\ (FAT32) does not support single files > 4 GB in size.
W 12:13:36 Drive F:\ (FAT32) does not support single files > 4 GB in size.
I 12:13:36 Initialising SPTI…
I 12:13:36 Searching for SCSI / ATAPI devices…
I 12:13:36 Found 1 DVD±RW/RAM!
I 12:16:40 Operation Started!
I 12:16:40 Building Image Tree…
I 12:16:51 Calculating Totals…
I 12:16:51 Preparing Image…
I 12:16:51 Contents: 1 File, 0 Folders
I 12:16:51 Size: 8Â 533Â 819Â 313 bytes
I 12:16:51 Sectors: 4Â 166Â 904
I 12:16:51 Image Size: 8Â 534Â 556Â 672 bytes
I 12:16:51 Image Sectors: 4Â 167Â 264
I 12:16:53 Operation Successfully Completed! - Duration: 00:00:12
I 12:16:53 Operation Started!
I 12:16:53 Source File: -==//[BUILD IMAGE]/==-
I 12:16:53 Source File Sectors: 4Â 167Â 264 (MODE1/2048)
I 12:16:53 Source File Size: 8Â 534Â 556Â 672 bytes
I 12:16:53 Source File Volume Identifier: none
I 12:16:53 Source File Application Identifier: ImgBurn v2.4.2.0
I 12:16:53 Source File Implementation Identifier: ImgBurn
I 12:16:53 Source File File System(s): UDF (2.50)
I 12:16:53 Destination Device: [3:0:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (H:) (ATA)
I 12:16:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x; 6x; 8x)
I 12:16:53 Destination Media Sectors: 4Â 173Â 824
I 12:16:53 Write Mode: DVD
I 12:16:53 Write Type: DAO
I 12:16:53 Write Speed: 2,4x
I 12:16:53 Link Size: Auto
I 12:16:53 Test Mode: No
I 12:16:53 OPC: No
I 12:16:53 BURN-Proof: Enabled
I 12:16:53 Book Type Setting: DVD-ROM
I 12:16:53 Optimal L0 Data Zone Capacity: 2Â 083Â 632
I 12:16:53 Optimal L0 Data Zone Method: ECC Block Boundary
I 12:17:07 Filling Buffer… (40 MB)
I 12:17:09 Writing LeadIn…
I 12:17:40 Writing Session 1 of 1… (1 Track, LBA: 0 - 4167263)
I 12:17:40 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 4167263)
I 12:17:40 Writing Layer 0… (LBA: 0 - 2083631)
I 12:31:15 Writing Layer 1… (LBA: 2083632 - 4167263)
W 12:31:47 Failed to Write Sectors 2103568 - 2103599 - Reason: Write Error
W 12:31:47 Retrying (1 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (2 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (3 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (4 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (5 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (6 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (7 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (8 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (9 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (10 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (11 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (12 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (13 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (14 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (15 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (16 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (17 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (18 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (19 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
W 12:31:47 Retrying (20 of 20)…
W 12:31:47 Retry Failed - Reason: Invalid Address For Write
E 13:24:48 Failed to Write Sectors 2103568 - 2103599 - Reason: Write Error
E 13:24:48 Next Writable Address: 2103568
I 13:24:48 Synchronising Cache…
W 13:24:57 User opted to skip the ‘Close Track/Session/Disc’ functions.
E 13:24:57 Failed to Write Image!
I 13:24:57 Exporting Graph Data…
I 13:24:57 Graph Data File: C:\Documents and Settings\Administrateur\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH22NP20_1.02_22-NOVEMBRE-2008_12-16_RITEK-S04-66_2,4x.ibg
I 13:24:57 Export Successfully Completed!
E 13:24:57 Operation Failed! - Duration: 01:08:04
I 13:24:57 Average Write Rate: 1Â 044 KB/s (0.8x) - Maximum Write Rate: 5Â 747 KB/s (4.1x)

Both burners do the same thing!

HELP!


#2

Hi AlexFWD:

The only DL media recommended is Verbatim and you are using Ritek. I strongly believe your problem will go away after switching brands.


#3

Some people have had success using Ritek S04 dual layer disks. Many have not been so lucky.

First suggestion is to buy Verbatim dual layer disks. They are the only ones consistent enough to get recommended around here.

This log shows you burning at 2.4x. Have you tried one at 4x? Just curious.


#4

With an LG I’d definitely use Verbatim DL as suggested. My LG’s at least tend to like the good stuff.

Other drives like Pioneer tend to be a little more forgiving with mediocre media.

BTW, welcome to the forum. :slight_smile:


#5

i dont know if im right or wrong but…

W 12:13:36 Drive E:\ (FAT32) does not support single files > 4 GB in size.
W 12:13:36 Drive F:\ (FAT32) does not support single files > 4 GB in size.

if your hdd is in fat32… how can the burner success burning a second layer when it cannot handle more than 4GB?

for me i think the hdd wont be able to transfert data to the dvd burner to burn the second layer since the hdd is limit to 4Gb so it will stop sending data to the dvd when it reach is limit to 4GB so i think you wont be able to write dual layer dvd until you have a ntfs partition on one of your hard drive.


#6

Wow thanks for the quick replies.

I have tried 2.4X, 4X and 6X.
When I first got the new drive, I successfully burned 8 DL-dvds in a row (TDK-Ritek?) and all of a sudden I cant get one to complete successfully. ( i didnt succeed with the memorex either)

Anyone looking for a spindle of abour 40 TDK and 10 Memorex DLs? :stuck_out_tongue:


#7

[QUOTE=doomerz;2161860]i dont know if im right or wrong but…

W 12:13:36 Drive E:\ (FAT32) does not support single files > 4 GB in size.
W 12:13:36 Drive F:\ (FAT32) does not support single files > 4 GB in size.

if your hdd is in fat32… how can the burner success burning a second layer when it cannot handle more than 4GB?

for me i think the hdd wont be able to transfert data to the dvd burner to burn the second layer since the hdd is limit to 4Gb so it will stop sending data to the dvd when it reach is limit to 4GB so i think you wont be able to write dual layer dvd until you have a ntfs partition on one of your hard drive.[/QUOTE]

I’m burning 8gb matroska files off another NTFS drive


#8

[QUOTE=AlexFWD;2161864]I’m burning 8gb matroska files off another NTFS drive[/QUOTE]

ahh… i see i was wrong then :smiley: maybe it is because of media quality after all… maybe your burner dont like ritek after all and need to see verbatim or ty in is lens hehe =)


#9

Well, I tried again with a memorex DVD-DL and it actually starts burning the 2nd layer for about 5 seconds and then copy speed goes down to zero and stops.

The 2nd layer starts at LBA: 2057072 to 4114143)

and the error starts at:

Failed to Write Sectors 2075024 - 2075055 - Reason: Write Error

so the burner actually writes from LBA 2057072 to 2075024 (about 18000 sectors) and takes a dump.


#10

[QUOTE=doomerz;2161860]i dont know if im right or wrong but…

W 12:13:36 Drive E:\ (FAT32) does not support single files > 4 GB in size.
W 12:13:36 Drive F:\ (FAT32) does not support single files > 4 GB in size.

if your hdd is in fat32… how can the burner success burning a second layer when it cannot handle more than 4GB?

for me i think the hdd wont be able to transfert data to the dvd burner to burn the second layer since the hdd is limit to 4Gb so it will stop sending data to the dvd when it reach is limit to 4GB so i think you wont be able to write dual layer dvd until you have a ntfs partition on one of your hard drive.[/QUOTE]

Answer: "I 12:16:53 Source File: -==//[BUILD IMAGE]/==-"
Besides, a ripping tool can automatically split larger files.


#11

[QUOTE=AlexFWD;2161879]Well, I tried again with a memorex DVD-DL and it actually starts burning the 2nd layer for about 5 seconds and then copy speed goes down to zero and stops.

The 2nd layer starts at LBA: 2057072 to 4114143)

and the error starts at:

Failed to Write Sectors 2075024 - 2075055 - Reason: Write Error

so the burner actually writes from LBA 2057072 to 2075024 (about 18000 sectors) and takes a dump.[/QUOTE]

You still failed to follow the given advice: ONLY use Verbatim DL!