Help burning data DVD

Hi, I’ve been trying to burn data onto a DVD-R and i keep getting an error. Heres the log

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <DVDRW IDE 16X> Version: A089 - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <QC3562Z SEZ303X >Version: 1.0 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <dtscsi> HA 2

=== Scsi-Device-Map ===
CdRomPeripheral : CD-R/RW CW099D CD-R/RW atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 0 ID 1 DMA: On
DiskPeripheral : HDS722580VLAT20 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : QC3562Z SEZ303X 1.0 dtscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
CD-R/RW CW099D CD-R/RW D: CDRom0
DVDRW IDE 16X F: CDRom1
QC3562Z SEZ303X E: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 147MB (151060kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.11.2005
UDF compilation
4:54:55 PM #1 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical

4:54:55 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

4:54:55 PM #3 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE 16X running

4:54:55 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

4:54:55 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2233071 (496:14.21, 4361MB)

4:54:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

4:54:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: UME01 -
Disc Application Code: 64, Disc Physical Code: 193

4:54:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:54:55 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2233072 (2233072) = #2233072/496:14.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233072 blocks [DVDRW IDE 16X]
--------------------------------------------------------------

4:54:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4573331456, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2233072 | lead-out | 1 | 0x41 | 0x00

4:54:55 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:54:55 PM #12 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

4:54:55 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:54:55 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

4:54:55 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:54:56 PM #16 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

4:54:56 PM #17 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Super Link -> ON

4:54:56 PM #18 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

4:54:56 PM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

4:55:25 PM #20 Text 0 File Cdrdrv.cpp, Line 1288
16:55:25.281 - DVDRW IDE 16X\H0 T1 : Queue again later

4:55:33 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
16:55:33.750 - DVDRW IDE 16X\H0 T1 : Queue again later

4:55:33 PM #22 Text 0 File Cdrdrv.cpp, Line 1288
16:55:33.937 - DVDRW IDE 16X\H0 T1 : Queue again later

4:55:34 PM #23 Text 0 File Cdrdrv.cpp, Line 1288
16:55:34.156 - DVDRW IDE 16X\H0 T1 : Queue again later

4:55:34 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
16:55:34.406 - DVDRW IDE 16X\H0 T1 : Queue again later

4:55:34 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
16:55:34.562 - DVDRW IDE 16X\H0 T1 : Queue again later

4:55:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
16:55:34.609 - DVDRW IDE 16X\H0 T1 : Queue again later

5:09:22 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0B820000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x12 0x1A 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

5:09:22 PM #28 CDR -1135 File Writer.cpp, Line 311
Write error

5:09:22 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:09:23 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

5:09:23 PM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 1186431

5:09:23 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File ‘WNASPINT.DLL’: Ver=V1.18, size=57344 bytes, created 10/5/2004 11:00:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 3/11/2005 2:28:09 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)
File ‘Drivers\dtscsi.sys’: Ver=?.?.?.?, size=223128 bytes, created 11/14/2005 10:20:41 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Two possible reasons:-

  1. DMA is not enabled on your HD. This will slow down the data output to the burner.

  2. Poor quality media. I don’t recognise the Media ID of UME01 although I did find a reference on google which suggests it might be 4x media.

Thanks bro!! :bigsmile: Turns out I had to burn them at 4x for them to work even though the discs say 8x, stupid cheap DVD’s. I couldn’t resist the black friday sales. :doh: