Having trouble burning Securom with my Plex Premium

vbimport

#1

Hi, I’m having trouble making a copy of Rollar Coaster Tychoon 2. It has securom 4.8 and I have burned games with this protection before, so I don’t understand why this isn’t working. The drives I have are a Nec DVD-RW ND2500A and a Plextor Premium.

Both drives are having trouble creating a BWA file using BWA builder 4. It just stays at 0.0% until I press cancel.

When I try to making an image of the cd using my plex preimum, this happens:

####################### Dumping/Recording Progress Log #######################
21:53:17 Processor info: AMD Athlon™ 64 Processor 3000+ (1001MHz)
21:53:17 Disc dumping: (D PLEXTOR CD-R PREMIUM(0:0)
21:53:18 Reading Mode: RAW + SUB-96 , Ignore reading errors
21:53:18 Source Info: Session: 1, Track: 1, Length: 551.8 MB / 062:46:48
21:53:19 Writing image file: C:\Documents and Settings\Justin Pan\Desktop\RCT2.mdf
21:53:29 Disc read error at: 1901
21:53:33 Disc read error at: 1902
21:53:38 Disc read error at: 1903
21:53:47 Disc read error at: 1904
21:53:51 Disc read error at: 1905
21:53:56 Disc read error at: 1916
21:54:01 Disc read error at: 1917
21:54:05 Disc read error at: 1918
21:54:10 Disc read error at: 1919
21:54:15 Disc read error at: 1920
21:54:17 Disc read error at: 1931
21:54:19 Disc read error at: 1932
etc…
22:12:31 Disc read error at: 4494
22:12:33 Disc read error at: 4495
22:12:37 Disc read error at: 4506
22:12:39 Disc read error at: 4507
22:12:39 Read data examination error at: 4504
22:12:39 Read data examination error at: 4505
22:12:39 Read data examination error at: 4506
22:12:39 Read data examination error at: 4507
22:12:39 C:\Documents and Settings\Justin Pan\Desktop\RCT2.mds: Image file writing aborted!
22:12:39 Disc dumping aborted!

I can make an image fine with my Nec, and I used that image with a BWA file from the internet to create my copy, but I don’t understand what’s wrong with my Plextor. I also tried burning the disc with my plex preimium using the blindwrite 4 method but the progress bar does not move. I’m using firmware 1.6 btw. Could it be some kind of setting I accidentally changed? Anybody have an idea what could be wrong? THanks for the help.