Having problems burning with Nero

I have been having a problem burning with Nero…I still get the error message everytime I get into the burn process about 85% done it pops this error message up…

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 9:49:52 AM
Nero API version: 6.3.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\Nero - Burning Rom
Recorder: <MATSHITA DVD-RAM UJ-850S>Version: 1.05 - HA 0 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-850S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST98823AS nvata Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-850S E: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 990MB (1014308kB)
Free physical memory: 504MB (516448kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.7.2007
NeroAPI
8:18:21 PM #1 Phase 112 File APIProgress.cpp, Line 250
DVD-Video files reallocation started

8:18:21 PM #2 Phase 114 File APIProgress.cpp, Line 250
DVD-Video files reallocation completed (no file modified)

8:18:21 PM #3 Phase 111 File APIProgress.cpp, Line 250
DVD-Video files sorted

8:18:21 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

8:18:21 PM #5 Text 0 File Writer.cpp, Line 124
Writer MATSHITA DVD-RAM UJ-850S running

8:18:21 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

8:18:21 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

8:18:21 PM #8 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-At-Once, using DVD media

8:18:21 PM #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286127 (508:01.52)

8:18:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

8:18:21 PM #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: MATSHITA DVD-RAM UJ-850S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

8:18:21 PM #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:18:21 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MATSHITA DVD-RAM UJ-850S ]
--------------------------------------------------------------

8:18:21 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [MATSHITA DVD-RAM UJ-850S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

8:18:21 PM #15 Phase 24 File APIProgress.cpp, Line 250
Caching of files started

8:18:21 PM #16 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

8:18:21 PM #17 Phase 25 File APIProgress.cpp, Line 250
Caching of files completed

8:18:21 PM #18 Phase 36 File APIProgress.cpp, Line 250
Burn process started at 2x (2,770 KB/s)

8:18:21 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:18:21 PM #20 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode

8:18:21 PM #21 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON

8:18:21 PM #22 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

8:18:21 PM #23 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

8:47:23 PM #24 SCSI -400 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00B90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0x8E 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x22 0x8B 0xB0 0x0A
0x00 0x29 0x00 0x00 0x03 0x00

8:47:23 PM #25 CDR -400 File Writer.cpp, Line 301
Unspecified target error

8:47:23 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:47:24 PM #27 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 2264767

8:47:25 PM #28 Phase 38 File APIProgress.cpp, Line 250
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 1:07:32 AM
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 24/08/2006 11:47:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.56a, size=43528 bytes, created 07/03/2007 7:51:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Now I am using Memorex type blank DVD’s…

Can someone please help me…Thanks

You could try burning those video files with ImgBurn to see if it’s just Nero with the problem.

Also probably a good idea to update Nero to 6.6.1.15 as your version doesn’t seem to be identifying your burner too well.

BTW Memorex :Z

Thanks I will try that and let you know

TimC it didn’t work…any other options for me…Thanks

Try to uninstall the Nero6 you have using Nero Clean Tools and download and install the latest Nero7 as trail version see if the problem will resolved.

So did it come up with the same or similar error in ImgBurn?

Same error…as IMG burn…any other options like different burning software…’

Thanks

Hi,

Then there is no Nero issue.

any other options like different burning software…'
Try different media. Verbatim would be a good choice.

8:47:23 PM #24 SCSI -400 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00B90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0x8E 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x22 0x8B 0xB0 0x0A
0x00 0x29 0x00 0x00 0x03 0x00

8:47:23 PM #25 CDR -400 File Writer.cpp, Line 301
Unspecified target error

Just thinking out loud but when you are burning, the target would be your drive with a blank disc in it & as Nero is stating a hardware error & not really rejecting your media, I would say the problem is with your target. Longshot but try removing this with RoxioZap & try again, sometimes it works & sometimes it doesn’t.

File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 24/08/2006 11:47:00 PM

Having this problem now with the new Nero 7…cannot beleive this…I am burning right up until 98% and then everytime it errors…at that point…any ideas…Thanks

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.1.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 3

Recorder: <MATSHITA DVD-RAM UJ-850S>Version: 1.05 - HA 1 TA 0 - 7.0.1.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-850S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST98823AS nvata Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-850S E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 990MB (1014308kB)
Free physical memory: 415MB (425316kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.7.2007
NeroAPI
1:00:31 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started

1:00:31 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)

1:00:31 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

1:00:31 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

1:00:31 PM #5 Text 0 File Reader.cpp, Line 124
Reader running

1:00:31 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: MATSHITA DVD-RAM UJ-850S running

1:00:31 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

1:00:31 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

1:00:31 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

1:00:31 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

1:00:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

1:00:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO

1:00:31 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: MATSHITA DVD-RAM UJ-850S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

1:00:31 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:00:31 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: MATSHITA DVD-RAM UJ-850S]
--------------------------------------------------------------

1:00:31 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: MATSHITA DVD-RAM UJ-850S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

1:00:31 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

1:00:31 PM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

1:00:31 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

1:00:31 PM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

1:00:31 PM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2x (2,770 KB/s)

1:00:31 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:00:31 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

1:00:31 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

1:00:31 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

1:00:31 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

1:29:32 PM #27 SPTI -1 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 00 00 22 8C E0 00 00 20 00 00 00
Sense Area: 0xF1 00 04 00 22 89 E0 0A 00 29 00 00 03
Buffer x015d0000: Len x10000
0x00 00 01 BA 44 1D 3C CE 35 69 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 AA 39 AD F7 AB AC D9 46 DB
0x15 B3 61 6D 73 B0 B6 C8 D2 D6 DA DD 88 C2 46 A4

1:29:32 PM #28 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
E: MATSHITA DVD-RAM UJ-850S

1:29:32 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:29:32 PM #30 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2264287

1:29:33 PM #31 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2x (2,770 KB/s)

1:29:33 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1:29:33 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 1:07:32 AM
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 24/08/2006 11:47:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.56a, size=43528 bytes, created 07/03/2007 7:51:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Tried Roxio zap and nothing as well same error…

That never was a option in my opinion.

If ImgBurn hadn’t failed as well I’d have said that the original Nero version you used was perhaps too old & the new Nero 7 version was too early in the development cycle & very buggy. Certainly the early V7 releases should really have been called beta releases as there were too many problems for a proper release.

What I don’t like is this

Connected to MMC as [B]unknown drive[/B] with class-nr : 1

I think that means that Nero doesn’t recognise the burner properly but I’m not too sure about that.

Why the 2x burn speed? If that’s all that’s offered by Nero , other than MAX, then the burners firmware doesn’t recognise the media & that could well explain the failures. I didn’t notice that in the earlier log.

That never was a option in my opinion.

That’s why I like open forums, everybody has them, right or wrong.

Hey there guys I have tried everything and still cannot seem to figure out why…the latest was that I tried Nero 7 full edition…father in law had copy…tried it at maximum speed burning and then as soon as it gets to 98% burned it says this:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.1.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 3

Recorder: <MATSHITA DVD-RAM UJ-850S>Version: 1.05 - HA 1 TA 0 - 7.0.1.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-850S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST98823AS nvata Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-850S E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 990MB (1014308kB)
Free physical memory: 304MB (311988kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.7.2007
NeroAPI
6:48:42 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started

6:48:43 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)

6:48:43 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

6:48:43 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

6:48:43 PM #5 Text 0 File Reader.cpp, Line 124
Reader running

6:48:43 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: MATSHITA DVD-RAM UJ-850S running

6:48:43 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

6:48:43 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

6:48:43 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

6:48:43 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

6:48:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

6:48:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO

6:48:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: MATSHITA DVD-RAM UJ-850S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

6:48:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:48:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: MATSHITA DVD-RAM UJ-850S]
--------------------------------------------------------------

6:48:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: MATSHITA DVD-RAM UJ-850S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

6:48:43 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:48:43 PM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

6:48:43 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

6:48:43 PM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

6:48:43 PM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

6:48:43 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:48:43 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

6:48:43 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

6:48:43 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

6:48:43 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

7:01:32 PM #27 SPTI -1 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 00 00 22 0E 00 00 00 20 00 00 00
Sense Area: 0xF1 00 04 00 22 0A F0 0A 00 29 00 00 03
Buffer x015b0000: Len x10000
0x00 00 01 BA 44 10 7C 62 45 BD 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 07 12 3D 09 55 01 52 C2 C5
0xF6 76 34 0C 48 48 21 9A 06 16 0C 0C 20 63 9F A1

7:01:32 PM #28 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
E: MATSHITA DVD-RAM UJ-850S

7:01:32 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:01:32 PM #30 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2231807

7:01:34 PM #31 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 8x (11,080 KB/s)

7:01:34 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

7:01:34 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 1:07:32 AM
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 24/08/2006 11:47:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.56a, size=43528 bytes, created 07/03/2007 7:51:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Please help…I am going crazy trying to figure this out.

all the logs show failure at the end of the disk, never go above 4400 with iffy blanks and such a questionable burner, I thought they had gone out of business

Might want to update that Nero as well but do not take InCD.

File ‘Drivers\CDRALW2K.SYS’:

That Roxio devil is still there too…apparently Roxiozap didn’t remove it.

This comes with Windows Media Player, and it shouldn’t hurt anyway.

http://www.cd-burner-help.com/roxio-error-cdr4-cdralw2k.htm

http://support.microsoft.com/kb/315345

too many filter drivers are an accident waiting to happen and nero already has that covered

What is this?

DiskPeripheral : ST98823AS nvata Port 2 ID 0 DMA: Off