Having big problems copying

vbimport

#1

Right here goes, I have been into copying for a couple of months now. Everything has been going swimmingly until the last week or so.

I use nero 6, decripter & 1-2-1 shrink.

I have just copied a whole box set of only fools and horses from the originals no problem at all. But when it comes to copying the copies I have made for a friend the burn process fails. I have gone through 12 discs today and only managed to complete 2. I though it may be the type of discs I was useing so I went out and bought some more but the same problem occurs.

I have the box set on infinity discs tried to write them onto RiDisc firstly without any luck so went out and bought some more infiniti’s and it still fails.

Being faily new to this burning lark I’m baffled.

Hope someone can help.

Cheers,

Pete.


#2

what method r u using to copy the copies ?


#3

I’m having the same problem. I have been using DVD Shrink 3.2 with Nero OEM 6.3.1.12 and have backed-up all of my DVDs with no problem until the last couple of weeks. My first problem was that I was using DVD+Rs which didn’t play on my DVD player (Toshiba). I rectified that by buying DVD-Rs (Ritek 4.7GB G05 8X DVD-R). I just tried to burn 6 DVDs - NONE of them worked - all said that the burn process failed. I tried to play them on my DVD player and some chapters play, later chapters stall, skip, and have loads of artifacts, and end chapters just make the DVD player make strange whiring noises.

Here is a copy of the error message:

Burn Error
Burn process failed at 4x (5,540 KB/s)

1234-5678-9012-3456-7890-1234*

Windows 2000 5.0
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 30/07/2004 8:56:26 PM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 7:18:06 PM
Nero API version: 6.3.1.12
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A102 - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 5T040H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W1610A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120 D: CDRom0
PLEXTOR CD-R PX-W1610A E: CDRom1

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 207MB (212148kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.1.2005
NeroAPI
11:30:29 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

11:30:29 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

11:30:29 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

11:30:29 AM #4 Text 0 File Reader.cpp, Line 118
Reader running

11:30:29 AM #5 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4120B running

11:30:29 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

11:30:29 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

11:30:29 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

11:30:29 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

11:30:53 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2094111 (465:21.36, 4090MB)

11:30:53 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

11:30:53 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

11:30:53 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD.)

11:30:53 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2094112 (2094112) = #2094112/465:21.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2094112 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

11:30:53 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4288741376, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2094112 | lead-out | 1 | 0x00 | 0x41

11:30:53 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

11:30:53 AM #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

11:30:53 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

11:30:53 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)

11:30:53 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:30:53 AM #21 Text 0 File DVDR.cpp, Line 1833
Recording mode: Sequential Recording Mode

11:30:53 AM #22 Text 0 File Mmc.cpp, Line 20173
Set BUFE: supported -> ON

11:30:53 AM #23 Text 0 File DVDR.cpp, Line 1974
Start write address at LBA 0
DVD high compatibility mode: Yes

11:30:53 AM #24 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

11:31:01 AM #25 Text 0 File Cdrdrv.cpp, Line 1293
11:31:01.745 - HL-DT-ST DVDRAM GSA-4120B\H1 T0 : Queue again later

11:42:16 AM #26 SCSI -1039 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0ED00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x1A 0xBF 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x00 0x0C 0x09 0x01

11:42:16 AM #27 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error

11:42:16 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:42:16 AM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

11:42:16 AM #30 Text 0 File DVDR.cpp, Line 2201
EndDAO: Last written address was 1753055

11:42:17 AM #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)

11:42:17 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

11:42:17 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File ‘Drivers\CDR4_2K.SYS’: Ver=5.3.2.31, size=58000 bytes, created 22/01/2003 10:09:42 AM
File ‘Drivers\CDRALW2K.SYS’: Ver=5.3.2.31, size=23420 bytes, created 22/01/2003 10:09:42 AM
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 30/07/2004 8:56:26 PM
File ‘WNASPINT.DLL’: Ver=5, 1, 0, 16, size=69632 bytes, created 21/09/2001 12:00:00 AM
File ‘Drivers\InCDfs.SYS’: Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 12:57:34 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 12:57:52 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 12:59:24 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Thanks for your help!!!


#4

Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01

This is what your error code means: Tracking Servo Failure. This is a list of possible resolutions to the problem.(sorry its so long winded)

Make sure you quit all running background programs, such as anti-virus software.
Windows95 Users
Use the Ctrl-Alt-Del function to quit all the programs using the Task Manager, EXCEPT for the Explorer, systray, and either B’s CLiP or B’s Recorder GOLD.

Windows 98/ME Users
Select [Start] -> [Run], then input “msconfig”. Disable everything under the [Startup] tab, except "system tray’.

Windows 2000/XP Users
Open the Task Manager, then select the program/s under the [Application] tab, then click [End Task].

  1. Drive Connection
    Other devices may be interfering with the CD-R/RW drive. Disconnect all other removable devices, then try recording again. If there is still a problem, try the following.

a. Optimal Hardware Configuration
All hard drives are placed on the Primary IDE, check that the drives are correctly set as master/slave. CD-ROM/CD-R/RW drives are placed on the Secondary IDE, set the recording drive as the “master”. If you are using a USB or IEEE devices, disconnect them.

b. Update your chipset
Windows 95/98/ME Users
Right click on [My Computer] and select [Properties] from the menu. Click on [Device Manager], then click to open [Hard Disk Controllers]. You will find: the Primary IDE Channel controller, the Secondary IDE Channel controller and a brand name controller, e.g. Intel, SIS, VIA, etc. The brand name controller is what needs to be updated. Please visit their website to obtain these updates.

Win NT/2000/XP Users
Right click on [My Computer] and select [Properties] from the menu. Click [Device Manager] on the [Hardware] tab, then click to open the [IDE ATA/ATAPI (hard disk) controllers] section. You will find: the Primary IDE Channel controller, Secondary IDE Channel controller, and a brand name controller, e.g. Intel, SIS, VIA, etc. The brand name controller is what needs to be updated. Please visit their website to obtain these updates.

c. Configure Windows
Make sure that your operating system has been fully updated. Visit the Microsoft website to acquire these updates.

  1. ASPI Manager
    B’s Recorder GOLD uses the Windows standard ASPI Manager. This may have been replaced when you installed other writing software, hence you cannot record with B’s Recorder GOLD or write with B’s CLiP. Click here to download the ASPI Reset Tool.
    If the problem persists, contact the drive maker.

  2. DMA Settings
    Setting DMA mode:
    Windows 95/98/ME Users
    Right click on [My Computer] and select [Properties] from the menu. Click on [Device Manager], then click on [CD-ROM]. This will expand to show the CD drives on your system. Right click on a drive and select [Properties] from the menu. Click on the [Settings] tab and check that the [DMA] option is enabled.
    Repeat this procedure for the remaining CD drives.

Win NT/2000/XP Users
Right click on [My Computer] and select [Properties] from the menu. Click [Device Manager] on the [Hardware] tab, then click to open the [IDE ATA/ATAPI (hard disk) controllers] section. You will find: the Primary IDE Channel controller, Secondary IDE Channel controller. Complete the following procedure:

Right click on the Primary IDE controller and select [Properties] from the menu.
Select the [Advanced Settings] tab. Check that the [Transfer Mode] for both devices is set to [DMA if available].
Repeat this for Secondary IDE controller.
Note:
In some cases older CD-ROM drives will not support DMA mode. In that case please set both devices to PIO mode.

  1. Disc
    a. Recording errors often occur when the disc is dirty, or has fingerprints or scratches. If an error occurred during test simulation (before actual recording), clean the disc. If you are getting recording errors, try the following.

•
Use a different blank, recordable disc.

•
Use a different manufacturer’s disc.

•
Ensure the disc is clean before recording:
- Remove all fingerprints, dirt, and dust from the shiny side of your disc using a nonabrasive cloth with a mild, nonabrasive soap solution.
- Wipe the disc from the center to the edge of the disc.

  • Dry the disc completely.

b. Error during file verification
If an error occurred when the files were being verified, record the same files again using a different disc.

c. Read error when copying a disc
When copying a disc, if an error occurred while reading data from the original disc, the original disc may be scratched or dirty.

•
Try cleaning the disc.
- Remove all fingerprints, dirt, and dust from the shiny side of your disc using a nonabrasive cloth with a mild, nonabrasive soap solution.
- Wipe the disc from the center to the edge of the disc.

  • Dry the disc completely.

•
Try using a different source drive.
- To change the drive you use to read your disc, click the Change button when asked to insert a source disc into your drive tray.
- Select the drive you wish to use from the drop-down menu.
- Insert your disc into the new drive.

•
Try using copying the disc using one drive as both the source and destination drive.
When you use your recorder to both read and write to your disc, B’s Recorder GOLD creates an image file of the entire disc to your hard drive and then copies that temporary file onto your blank disc. This can be helpful if the drive you are using to read your original disc is slow or unreliable.

If the problem persists, contact the drive maker.


#5

clarenceneedleme, 1st thing i would do if it was my system is get rid of INCD


#6

Really starting to wind me up now. Thought i’d give it another go this morning the first one I copied no problems at all then 3 coasters!!!

One point, a mate of mine took one of my discs and tried it on his pc, result: coaster tried to burn the same dvd with one of his discs straight after no problem, he uses “BUDGET” 1-8X dvd-r’s that he bought for £18 for 100 at a computer fair a couple of weeks ago. Said he’s had no problem with them at all.

So sounds like it could be a batch of shite discs I have what do you all recommend.

Cheers,

Pete.

P.S Just as I write this the burn has failed again!!!

PPS, this is the error report:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 19:01:02
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 13:25:04
Nero version: 6.0.0.24 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.10 - HA 0 TA 0 - 6.0.0.24
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 0 TA 1 - 6.0.0.24
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-108 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y160M0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-108 D: CDRom0
SAMSUNG DVD-ROM SD-616E E: CDRom1

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1046620kB)
Free physical memory: 532MB (545320kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.1.2005
DVD-Copy on the fly
09:00:52 #1 Text 0 File Reader.cpp, Line 118
Reader running

09:00:52 #2 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-108 running

09:00:52 #3 Text 0 File DVDCopy.cpp, Line 239
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2285881 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

09:00:52 #4 Text 0 File DVDCopy.cpp, Line 332
Max -1 tracks of 1 allowed to copy
1: 0 - 2285881 = 2285881, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

09:00:52 #5 Text 0 File Burncd.cpp, Line 3217
Turn on Disc-at-once, using DVD media

09:00:52 #6 Text 0 File DlgWaitCD.cpp, Line 235
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286030 (508:00.30)

09:00:52 #7 Text 0 File DlgWaitCD.cpp, Line 240
Write in overburning mode: FALSE

09:00:52 #8 Text 0 File DlgWaitCD.cpp, Line 2040
Recorder: PIONEER DVD-RW DVR-108, Media type: DVD-R
Disc Manufacturer: SONY04 - D1
Disc Application Code: 64, Disc Physical Code: 193

09:00:52 #9 Text 0 File DlgWaitCD.cpp, Line 401
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:00:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 773
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2285881 (2285881) = #2285881/507:58.31
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285881 blocks [PIONEER DVD-RW DVR-108 ]
--------------------------------------------------------------

09:00:52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 942
Prepare recorder [PIONEER DVD-RW DVR-108 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681484288, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285881 | lead-out | 1 | 0x00 | 0x41

09:00:52 #12 Phase 36 File dlgbrnst.cpp, Line 1803
Burn process started at 4x (5,520 KB/s)

09:00:52 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

09:00:52 #14 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 14:10,190 (850190ms) -> OK

09:00:52 #15 Text 0 File DVDR.cpp, Line 1260
Recording mode: Sequential Recording Mode

09:00:52 #16 Text 0 File Mmc.cpp, Line 19508
Set BUFE: supported -> ON

09:00:52 #17 Text 0 File DVDR.cpp, Line 1375
Start write address at LBA 0
DVD high compatibility mode: Yes

09:00:52 #18 Text 0 File Cdrdrv.cpp, Line 7880
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

09:01:14 #19 Text 0 File Cdrdrv.cpp, Line 1273
09:01:14.968 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:01:41 #20 Text 0 File Cdrdrv.cpp, Line 1273
09:01:41.593 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:04 #21 Text 0 File Cdrdrv.cpp, Line 1273
09:02:04.593 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:04 #22 Text 0 File Cdrdrv.cpp, Line 1273
09:02:04.750 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:06 #23 Text 0 File Cdrdrv.cpp, Line 1273
09:02:06.406 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:08 #24 Text 0 File Cdrdrv.cpp, Line 1273
09:02:08.281 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:08 #25 Text 0 File Cdrdrv.cpp, Line 1273
09:02:08.421 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:08 #26 Text 0 File Cdrdrv.cpp, Line 1273
09:02:08.500 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:10 #27 Text 0 File Cdrdrv.cpp, Line 1273
09:02:10.140 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:11 #28 Text 0 File Cdrdrv.cpp, Line 1273
09:02:11.656 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:11 #29 Text 0 File Cdrdrv.cpp, Line 1273
09:02:11.812 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:11 #30 Text 0 File Cdrdrv.cpp, Line 1273
09:02:11.890 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:13 #31 Text 0 File Cdrdrv.cpp, Line 1273
09:02:13.359 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:13 #32 Text 0 File Cdrdrv.cpp, Line 1273
09:02:13.515 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:15 #33 Text 0 File Cdrdrv.cpp, Line 1273
09:02:15.312 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:15 #34 Text 0 File Cdrdrv.cpp, Line 1273
09:02:15.468 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:17 #35 Text 0 File Cdrdrv.cpp, Line 1273
09:02:17.234 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:17 #36 Text 0 File Cdrdrv.cpp, Line 1273
09:02:17.390 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:17 #37 Text 0 File Cdrdrv.cpp, Line 1273
09:02:17.437 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:18 #38 Text 0 File Cdrdrv.cpp, Line 1273
09:02:18.875 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:19 #39 Text 0 File Cdrdrv.cpp, Line 1273
09:02:19.031 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:19 #40 Text 0 File Cdrdrv.cpp, Line 1273
09:02:19.093 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:20 #41 Text 0 File Cdrdrv.cpp, Line 1273
09:02:20.609 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:20 #42 Text 0 File Cdrdrv.cpp, Line 1273
09:02:20.750 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:22 #43 Text 0 File Cdrdrv.cpp, Line 1273
09:02:22.406 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:24 #44 Text 0 File Cdrdrv.cpp, Line 1273
09:02:24.296 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:24 #45 Text 0 File Cdrdrv.cpp, Line 1273
09:02:24.437 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:26 #46 Text 0 File Cdrdrv.cpp, Line 1273
09:02:26.265 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:26 #47 Text 0 File Cdrdrv.cpp, Line 1273
09:02:26.406 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:27 #48 Text 0 File Cdrdrv.cpp, Line 1273
09:02:27.953 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:29 #49 Text 0 File Cdrdrv.cpp, Line 1273
09:02:29.812 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:29 #50 Text 0 File Cdrdrv.cpp, Line 1273
09:02:29.953 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:31 #51 Text 0 File Cdrdrv.cpp, Line 1273
09:02:31.796 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:31 #52 Text 0 File Cdrdrv.cpp, Line 1273
09:02:31.937 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:33 #53 Text 0 File Cdrdrv.cpp, Line 1273
09:02:33.734 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:33 #54 Text 0 File Cdrdrv.cpp, Line 1273
09:02:33.890 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:35 #55 Text 0 File Cdrdrv.cpp, Line 1273
09:02:35.421 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:37 #56 Text 0 File Cdrdrv.cpp, Line 1273
09:02:37.140 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:38 #57 Text 0 File Cdrdrv.cpp, Line 1273
09:02:38.968 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:39 #58 Text 0 File Cdrdrv.cpp, Line 1273
09:02:39.109 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:39 #59 Text 0 File Cdrdrv.cpp, Line 1273
09:02:39.187 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:41 #60 Text 0 File Cdrdrv.cpp, Line 1273
09:02:41.062 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:42 #61 Text 0 File Cdrdrv.cpp, Line 1273
09:02:42.968 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:43 #62 Text 0 File Cdrdrv.cpp, Line 1273
09:02:43.109 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:45 #63 Text 0 File Cdrdrv.cpp, Line 1273
09:02:45.000 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:47 #64 Text 0 File Cdrdrv.cpp, Line 1273
09:02:47.015 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:48 #65 Text 0 File Cdrdrv.cpp, Line 1273
09:02:48.984 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:51 #66 Text 0 File Cdrdrv.cpp, Line 1273
09:02:51.093 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:53 #67 Text 0 File Cdrdrv.cpp, Line 1273
09:02:53.093 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:55 #68 Text 0 File Cdrdrv.cpp, Line 1273
09:02:55.328 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:55 #69 Text 0 File Cdrdrv.cpp, Line 1273
09:02:55.468 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:57 #70 Text 0 File Cdrdrv.cpp, Line 1273
09:02:57.437 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:02:59 #71 Text 0 File Cdrdrv.cpp, Line 1273
09:02:59.453 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:01 #72 Text 0 File Cdrdrv.cpp, Line 1273
09:03:01.671 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:01 #73 Text 0 File Cdrdrv.cpp, Line 1273
09:03:01.859 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:03 #74 Text 0 File Cdrdrv.cpp, Line 1273
09:03:03.968 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:04 #75 Text 0 File Cdrdrv.cpp, Line 1273
09:03:04.171 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:06 #76 Text 0 File Cdrdrv.cpp, Line 1273
09:03:06.109 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:08 #77 Text 0 File Cdrdrv.cpp, Line 1273
09:03:08.359 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:08 #78 Text 0 File Cdrdrv.cpp, Line 1273
09:03:08.515 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:10 #79 Text 0 File Cdrdrv.cpp, Line 1273
09:03:10.500 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:12 #80 Text 0 File Cdrdrv.cpp, Line 1273
09:03:12.734 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:12 #81 Text 0 File Cdrdrv.cpp, Line 1273
09:03:12.921 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:14 #82 Text 0 File Cdrdrv.cpp, Line 1273
09:03:14.843 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:17 #83 Text 0 File Cdrdrv.cpp, Line 1273
09:03:17.046 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:17 #84 Text 0 File Cdrdrv.cpp, Line 1273
09:03:17.234 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:19 #85 Text 0 File Cdrdrv.cpp, Line 1273
09:03:19.312 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:19 #86 Text 0 File Cdrdrv.cpp, Line 1273
09:03:19.515 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:21 #87 Text 0 File Cdrdrv.cpp, Line 1273
09:03:21.500 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:23 #88 Text 0 File Cdrdrv.cpp, Line 1273
09:03:23.703 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:23 #89 Text 0 File Cdrdrv.cpp, Line 1273
09:03:23.906 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:26 #90 Text 0 File Cdrdrv.cpp, Line 1273
09:03:26.093 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:28 #91 Text 0 File Cdrdrv.cpp, Line 1273
09:03:28.578 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:28 #92 Text 0 File Cdrdrv.cpp, Line 1273
09:03:28.765 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:28 #93 Text 0 File Cdrdrv.cpp, Line 1273
09:03:28.828 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:30 #94 Text 0 File Cdrdrv.cpp, Line 1273
09:03:30.937 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:31 #95 Text 0 File Cdrdrv.cpp, Line 1273
09:03:31.125 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:33 #96 Text 0 File Cdrdrv.cpp, Line 1273
09:03:33.531 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:33 #97 Text 0 File Cdrdrv.cpp, Line 1273
09:03:33.703 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:35 #98 Text 0 File Cdrdrv.cpp, Line 1273
09:03:35.843 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:36 #99 Text 0 File Cdrdrv.cpp, Line 1273
09:03:36.031 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:38 #100 Text 0 File Cdrdrv.cpp, Line 1273
09:03:38.171 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:40 #101 Text 0 File Cdrdrv.cpp, Line 1273
09:03:40.718 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:40 #102 Text 0 File Cdrdrv.cpp, Line 1273
09:03:40.921 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:43 #103 Text 0 File Cdrdrv.cpp, Line 1273
09:03:43.312 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:43 #104 Text 0 File Cdrdrv.cpp, Line 1273
09:03:43.484 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:43 #105 Text 0 File Cdrdrv.cpp, Line 1273
09:03:43.546 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:45 #106 Text 0 File Cdrdrv.cpp, Line 1273
09:03:45.718 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:48 #107 Text 0 File Cdrdrv.cpp, Line 1273
09:03:48.171 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:48 #108 Text 0 File Cdrdrv.cpp, Line 1273
09:03:48.359 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:48 #109 Text 0 File Cdrdrv.cpp, Line 1273
09:03:48.406 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:51 #110 Text 0 File Cdrdrv.cpp, Line 1273
09:03:51.093 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:51 #111 Text 0 File Cdrdrv.cpp, Line 1273
09:03:51.281 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:51 #112 Text 0 File Cdrdrv.cpp, Line 1273
09:03:51.328 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:53 #113 Text 0 File Cdrdrv.cpp, Line 1273
09:03:53.921 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:56 #114 Text 0 File Cdrdrv.cpp, Line 1273
09:03:56.734 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:56 #115 Text 0 File Cdrdrv.cpp, Line 1273
09:03:56.906 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:56 #116 Text 0 File Cdrdrv.cpp, Line 1273
09:03:56.968 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:59 #117 Text 0 File Cdrdrv.cpp, Line 1273
09:03:59.687 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:03:59 #118 Text 0 File Cdrdrv.cpp, Line 1273
09:03:59.859 - PIONEER DVD-RW DVR-108\H0 T0 : Queue again later

09:14:29 #119 SCSI -1093 File Cdrdrv.cpp, Line 1427
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x083EB000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1E 0x5C 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

09:14:33 #120 SCSI -1093 File Cdrdrv.cpp, Line 1427
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x083EB000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1E 0x5C 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

09:14:33 #121 TRANSFER -25 File Reader.cpp, Line 371
Error reading data

09:14:44 #122 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

09:14:44 #123 Text 0 File DVDR.cpp, Line 1579
EndDAO: Last written address was 1989823

09:14:46 #124 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK

09:14:46 #125 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK

09:14:46 #126 Phase 38 File dlgbrnst.cpp, Line 1803
Burn process failed at 4x (5,520 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 13:07:32
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.70a, size=20176 bytes, created 03/03/2004 01:02:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#7

Thanks for your help, pollushon, I’ll give it a shot.
CN


#8

Just had another play I can copy to my hard drive and then to a blank disc and I can also copy music cd’s without a problem. So would that suggest crap media that the films were copied onto originaly?

Cheers,

Pete.


#9

@pistolpete872

Look in pollushon signature for th Media ID Quality Guide link


#10

Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
This is just a media error, as in crappy media.