GSA-4210B Tracker Error

vbimport

#1

Justin
Home
1A23-0809-9030-2448-1513-0497

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A116 - HA 0 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-ROM GCR-8483B>Version: 1.00 - HA 0 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120B D: CDRom0
HL-DT-ST CD-ROM GCR-8483B E: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514792kB)
Free physical memory: 184MB (188748kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.6.2005
Burn DVD Image
4:06:10 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

4:06:10 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4120B running

4:06:10 PM #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

4:06:10 PM #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2225097 (494:27.72, 4345MB)

4:06:10 PM #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

4:06:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

4:06:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:06:10 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2225098 (2225098) = #2225098/494:27.73
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225098 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

4:06:10 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4557000704, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2225098 | lead-out | 1 | 0x41 | 0x00

4:06:10 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:06:10 PM #11 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

4:06:10 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:06:10 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

4:06:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:06:10 PM #15 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode for Multisession

4:06:10 PM #16 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

4:06:10 PM #17 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

4:06:10 PM #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

4:06:40 PM #19 SCSI -1039 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04360000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x00 0x0C 0x09 0x01

4:06:40 PM #20 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error

4:06:40 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:06:40 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:06:40 PM #23 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 31583

4:06:40 PM #24 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

4:06:41 PM #25 SCSI -1039 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x00 0x0C 0x09 0x01

4:06:41 PM #26 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x5B 0x01 0x00 0x0C 0x72 0x04

4:06:41 PM #27 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error
HL-DT-ST DVDRAM GSA-4120B\H0 T0

4:06:41 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

4:06:41 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:13 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)